| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61
Comments:
<0> disavowed, im tryng to set up eth0 on a new install with 2006.0
<1> the graph apears at the middle of boot process. the wiki says, to use vesafb , but it doesnt work anyway. is it posible to do it like it is done on the livecd?
<2> chi, does ur machine have firewire etc? try doin ifconfig -a , and see how many eth interfaces appear, also worth doin an lsmod to see whats loaded
<3> who had problems with crontab?
<4> chi: but maybe you are using the wrong device for eth0 , a friend of mine had the same problem. linked to firewire
<3> loopy: ping
<0> disavowed, im not using firewire
<0> i see what your hinting at and will try ;]
<4> deertay: another thing,if you are looking for any app, check kde-apps.org and if you find a tool, try to look it up in portage so you can emerge it. thats my way
<5> so i was feeling pretty smart cuz i was getting this error when compiling avalon logkit, and i thought to set my java_home to an older version to make my compile work, yet im still getting the same error [javac] javac: target release 1.2 conflicts with default source release 1.5
<5> and now i dont feel so smart anymore
<6> thanks...good idea, no more guessing right?
<4> deertay: yeah :) but guessing sometimes leads to interesting results ;)
<6> yeah i am back to finishing my update of gcc, gonna finish this before moving on
<4> good luck
<7> oddest thing happened with my gentoo installation
<7> the graphical installer failed at the bootloader
<7> grub-install manually failed
<7> but using the grub interpreter worked
<8> graphicsl installer is in alpha stages i think
<7> however, when I booted in, I didn't have X or any of the other options I had chosen with teh graphical installer
<6> (Please substitute "i686-pc-linux-gnu-3.4.5" with the GCC
<6> version and CHOST settings you've upgraded to:)
<6> # gcc-config i686-pc-linux-gnu-3.4.5
<7> it seemed to be a remenant intstallation of my previous minimal installation attempt that I aborted admist the bootstrap
<6> where do i find that information?
<7> so Im emerging xorg and fluxbox now
<8> deertay, gcc --version
<6> ok
<7> then it occurred to me... is it possible for me to install xorg binaries manually without breaking emerge? I mean, it wont kknow I have x and will try to install it if I emerge anything that has xorg as a dependancy right?
<9> deertay, gcc-config -l
<10> sess, you need to update your USE flags to do "-X -gnome -kde" and so forth
<10> then it won't do it
<11> sess: yes, unless you use profile/package.provided
<10> oh, I guess LinuxBlues solution is probably better
<7> then my next question, are there ANY gentoo binaries for emerge similar to debians apt?
<12> you guys, so any way to tell emerge to skip the update of a package?
<11> sess: no
<7> it takes an buttload of time to build xorg on my laptop running a p3m at 1.13ghz
<10> sess, that's just the Gentoo way =)
<12> i'm sure there is! : ) help? : )
<11> sess: it only has openoffice and mozilla(firefox), bins provided upstream btw
<13> sess: only from the tinderbox which is not intended for use by end-users (rather, it's used for QA purposes by developers). and it's not appropriate to use binaries from an external source unless you don't adjust the profile defaults in any way and use the same architecture/portage profile etc.
<14> sess: what do you mean? emerge is the equivalent to debian's apt
<11> sess: mine a p3m @ 1Ghz ;-) be patient
<10> wandschrank, I think he means he wants binary packages and not source
<15> vagrant: ok
<1> i dont get the splash to work. all i do just dosnt change anything. i compiled it into kernel and used vesafb any other suggestions?
<13> sess: also, it is possible to perform rapid installations of some packages using the new 2006.0 LiveCD on x86 platform. on other arches there are optional packages CDs (which work fine as long as you stick to the portage snapshot provided with that release)
<11> sess: if you need a binary distro based on gentoo use ututo
<15> sess: you can also install binary pakages by emerge but it doesn't work well
<10> doesn't binary packages on gentoo defeat the point?
<10> wouldn't that be more like Arch?
<16> Hi, ime moving my install from a IDE to a SATA HD. I have mirrored the FS and am copying everything to the new dist with -fsp. /dev/hda1 -> /dev/sda1 etc. What else will I need to do?
<11> schrankwand: never tried it, probably you can install ututo bins with portage binhost, there was an article on the wiki IIRC
<17> guys, how long will this take for a clean installation on a prescott 3 Ghz with 2 gieg ram? => emerge --update --deep --newuse world
<10> ftwig. update grub.conf
<11> mzbot: wiki LinuxBlues binaries
<18> LinuxBlues: http://gentoo-wiki.com/HOWTO_Install_Gentoo_Linux:_Configuring
<15> LinuxBlues sess: mine a p3m @ 1Ghz ;-) be patient | i can top that. I have a P3 with 700mhz ;)
<11> :)
<10> emerge goes pretty fast on the core duo =)
<19> Hi, what are best setting for CFLAGS and USE with a Sempron 3000+ and Nvidia 6100 integrated videocard under gnome?
<16> vangrant:will it still be 'root=(hd0,0)'?
<10> yes
<16> vagrant:will it still be 'root=(hd0,0)'?
<13> mzbot: wiki kirth safe cflags
<17> vagrant: how long will it take on my single core prescott to recompile base system?
<18> kirth: http://gentoo-wiki.com/Safe_Cflags
<10> ftwig. yes
<0> disavowed, you where right! thanks for the help
<13> kirth: look for your processor there (you can narrow it down by cross-referencing the information shown by cat /proc/cpuinfo)
<11> ftwig: yes, cat /boot/grub/device.map to be sure
<19> ok, thanks
<10> ftwig, ya grub.conf shouldn't need changes, just give it a look over to make sure it looks right
<20> is there a parameter for openssh to enable a "local echo" support?
<21> i can't get 1024x768 resolution on my dell inspiron 1100 with an intel 845 chipset...i can paste my xorg.conf if that would help...it won't let me log into 24 bit mode either
<22> Anyone know why I can't access anything from eth0 with my gateway set to 192.168.1.1 on my Marvell Yukon controller? I'm using the skge module, not sk98lin, it's the only one that will create and hold a connection for me.
<16> vagrant:it is copying /dev which is mounted udev, shall I delete everything under /dev? So when the cipy has finished and i've changed /dev/hd to /dev/ds I should be able to unplug my IDE drive and reboot?
<22> Sigh, good old #gentoo, where any sort of help takes a good while.. :)
<10> m0p, can you ping the gateway?
<6> when you emerge something, since athlon xp packages are bittorrent only, does emerge get the correct packages or do i need to bittorrent them
<1> cant get fbsplash to work. starts at middle of boot process. tryed everything from the wiki. someone knows hows the livecd does it?
<22> vagrant: Nope
<22> I get a "No route to destination" error
<10> ftwig, I may be wrong but I don't think if you have to "delete" anything from /dev ..
<22> I would try the other controller on my mobo (nForce), but forcedeth doesn't load.
<16> vagrant:OK, and obviously change /etc/fstab on new HD.
<22> The same settings with the same module work fine on the minimal livecd.
<10> ftwig, definitely change fstab
<23> can you guys please ban 'zid'
<10> ftwig, even if something goes wrong, you can boot with your livecd and fix it =)
<23> he'll probably stop stealing my nick if he's banned from here
<22> Anyone know what is up with my NIC then? Or will I have to try and invent a quickfix solution that will probably break my installation? :P
<24> zid: or you could always try registering with nickserv.
<23> it is
<23> hence the ghost
<24> zid: then what's the problem?
<25> What's the problem, then?
<26> zid: you can set hostmask permissions with nickserv i believe
<23> the fact he's using my name?
<23> good point acctualy
<10> m0p, do you have an ip address?
<22> vagrant: Yep
<10> can you ping loopback?
<25> /msg nickserv help access
<11> zid: /msg nicksrv ghost nick p***word
<22> I've tried setting my IP to both 192.168.1.2 and 194.168.1.4
<23> zid_: stop using my name
<11> zid: it kill him ;-)
<10> what happens when you ping your ip address?
<23> I already did it, twice
<22> vagrant: I'll have to reboot and find out, using the minimal CD right now.
<10> ok. well try that
<22> But when I ping 192.168.1.2 I get the same error as my router, but I'll try loopback. brb
<27> is there a way to mount a drive readonly (/usr) without rebooting or booting into a livecd?
<28> zid: it`s my nick too
<28> i`m five years zid )
<23> no, it's not
<23> I registered it, it's mine
<29> johndo, you mean remount?
<11> johndo: mount -o remount,ro
<21> http://pastebin.com/582394 <- xorg.conf file. I can't seem to get the correct resolution and i want to install gentoo from the live cd
<24> zid: you'll need to ping a freenode staffer if you think some action should be taken against the other zid (which it shouldn't, if you can ghost him then there's no problem for you getting it back, and he can't identify with it)...don't have an argument in here, it's off-topic.
<28> ok
<7> how do I resume an emerge that died because a file could not be found
<23> blackace: ban me then
<27> LinuxBlues and kojiro, thanks
<30> johndo: you can also try longer solution :) umount /usr && mount /dev/hdaX /usr ro
<29> zid, don't think he won't
<27> prizman, I can't umount it
<27> prizman, because its in use
<24> zid: if you push the issue, I will ban you, and add a ban exemption for the other zid...but this isn't the place to solve your nick problem.
<31> you mean
<23> anyway, you're right I don't even use gentoo
<31> /mnt/dev/hdaX/usr -o ro
<23> I use slackware
<30> johndo: so remount
<25> Wow...
<25> I am stunned
<27> prizman, right, that part worked. reiserfschck runs happily now
<30> johndo: nice to hear that
<32> How fo you check you cpu temp with grep?
<33> coff3eBuZz I there
<1> i dont get the splash to work. all i do just dosnt change anything. i compiled it into kernel and used vesafb any other suggestions?
<30> blmartin777: using i2c
<32> No I mean on command line
Return to
#gentoo
or
Go to some related
logs:
#osdev
#ubuntu
Kubuntu configure xmms
for loops delimited by newlines in bash
Memcoder frontend
mount error 6 cifs
gentoo access_wr: /
u2nmy50u1
#gentoo
crapweasel defined
|
|