| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58
Comments:
<0> LSD`, ok I am gonna reboot and try...if it still fails then what?
<1> SiSteM[32], did you follow the gentoo handbook?
<2> power1: if you don't run make oldconfig then when it comes across anything new/changed it'll simply ***ume the default which may or may not be what you want
<3> yah SmileyG
<4> LSD`: out of curiosity is this 2.6.16-gentoo-rc8 to rc9?
<1> ok SiSteM[32] can you put you fstab on a pastebin for me?
<2> printk: it should work on any kernel, I even did it from a 2.4 -> 2.6 once (despite it apparently not being supposed to work)
<3> em SmileyG where was it :P
<1> that means NOT pasting it here, but using a website to paste it on.
<3> fstab
<1> /etc/fstab
<4> LSD`: yah, but i was just curious because i just had emerge download rc9 during an update.. i was just about to copy the .config over to it. :)
<3> aa SmileyG, /dev/cdroms/cdrom0 /mnt/cdrom/ iso9660 noauto,ro,user 0 0
<0> LSD`, ive recopied the old .config file and done a make oldconfig, and recompiled but i dont think its gonna make any difference
<0> LSD`, ill reboot and see
<3> SmileyG the /dev/cdroms/cdrom0 is wrong i think
<1> sec SiSteM[32]
<3> i did cat on it and it didnt exist .. when i did cat /dev/cdrom it worked..
<1> well SiSteM[32] i only have /dev/cdrom (no s)
<2> printk: cp .config && make oldconfig && make && make modules_install && cp arch/i386/boot/bzImage /boot && reboot was my staple kernel upgrade procedure for ages
<1> SiSteM[32], as root, try changing the /dev/cdroms to rom
<3> SmileyG ya its correct.. ok
<1> /dev/cdroms/cdrom0 /mnt/cdrom iso9660 noauto,ro $
<1> weird, mine says croms too :o
<1> s/c/cd
<5> znh: font list where? try "xset -fp rehash"
<3> yay SmileyG, now kde daemon came up.. a new medium has been detected :P
<1> :D
<6> Rainskellr: warning no entries deleted from font path
<3> unmount cdrom
<1> congratz SiSteM[32], you almost debugged that entirely on your own.
<3> yah i can access it now SmileyG
<1> openbysource, does it help?
<3> :) ty SmileyG
<5> znh: A FONT INSTALLED VIA EMERGE ?
<1> hehe no SiSteM[32]
<5> oops
<1> hehe no problem, SiSteM[32]
<6> Rainskellr: nope
<7> SmileyG: as I said earlier I am silent admirer
<1> does sending people to manuals help tho?
<7> SmileyG: you really rock , nice to meet you
<1> thank you
<1> :D
<1> its nice to have admirers,
<5> in your home dir under ~/.fonts ?
<7> SmileyG: I am reading the channel for 6 hours now
<1> i wonder who, why you admire me, anyone else you admire?
<7> SmileyG: I found you
<1> i know a few people in here who do a damn ***tounding job
<7> SmileyG: nice contine
<7> continue*
<1> i can't see any of them :o
<5> might try "mkfontdir" and "mkfontscale" in the directory where they are installed
<7> lol
<1> im the guy that just drops in and either asks for help, or randomly helps out where ican
<7> nice
<8> openbysource: tell me that you are not serious ;]
<1> its weird....
<1> hi Peper :P
<8> hi ;]
<1> openbysource, you a gentoo user?
<7> yeah noobie
<1> so your watching whats going on? ;]
<8> "silent admirer" (c)
<8> :D
<7> yeah
<7> lol
<1> hehe
<1> i've been using gentoo for ~1yr
<1> its awesome and i love it
<9> hey, my machine says: please run #/sbin/depscan.sh to try and fix this
<7> I started off last weekend
<9> how do i run that /sbin/depscan.sh?
<8> wizo: why don;t you do it
<8> just like you wrote
<1> yep
<9> do i just type in /sbin/depscan.sh ?
<1> yep :
<10> as root, yes.
<4> same here wizo, i installed gentoo this week for the first time. All though I've been using Linux since about 94...
<1> in a terminal, or console
<4> er that was meant for openbysource, not wizo
<1> how you finding it printk ?
<9> cause it doesnt return anyhting
<4> absolutley love it
<7> printk: 94 ?
<1> the documentation is amazing is it not?
<7> printk: years I guess
<9> and the thing im trying to run still gives me the error
<5> wizo: try "depscan.sh --update"
<1> 1994
<4> I'm an old school "compile > pre-compile", yes yes I know benchmarks say otherwise, but it's a mental thing :)
<4> openbysource - since 1994 :)
<7> printk: I am on 2003
<1> i dont care about bench marks
<1> portage is amazing, and the documentation is out of this world
<8> wizo: and what's the problem then?
<0> LSD`, umm still no go, still kernel panic about unknow root=/sda3 or (hd0,0)
<4> oh yah. portage is the bonus to me. I love how the init is setup.. everything really
<4> It's how I always wanted a Linux distro to be :)
<0> printk, umm still no go, still kernel panic about unknow root=/sda3 or (hd0,0)
<1> power1, im alomost sure that should be /dev/sda3
<1> ?
<4> power1 - and /dev/sda3 is your root right?
<1> anyone?
<9> Peper: the app im trying to run is still erroring
<1> what app wizo ?
<0> yip, its the exact same thing that the grub.conf has in it for the genkernel setup that works...
<9> bitlbeed
<8> wizo: but what app and what is the error, forger about depscan for now ;]
<11> hello, i've got a problem with my sata: I got 2 controllers, first onboard, second in a slot. When i put devices on my onboard controller gentoo doesnt start anymore. Any suggestions why?
<1> SauL2, bios is set to boot from the controler first?
<0> printk, title=Gentoo Linux
<0> root (hd0,0)
<0> kernel /kernel-genkernel-x86-2.6.15-gentoo-r5 root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/sda3
<2> SauL2: using the onboard messes up the bios detect order causing your bootloader to lose its mind
<1> or not at all?
<4> power1 - yah no clue man. You have a way to boot your system tho? backup loader in grub? or livecd? I'd try maybe make clean then re-compile it with the .config... *shrugs*
<11> ok, a bit more detailed now:
<9> ok oh, i tried running sudo /etc/init.d/bitlbeed start
<0> printk, thats for genkernel and this is for my kernel title Gentoo-2.6.16-gentoo-r7
<0> root (hd0,0)
<0> kernel /kernel-2.6.16-gentoo-r7 root=/dev/sda3
<9> but it says Could not get dependancy info for logger.
<12> mldonkey vs gift vs amule???
<0> LSD`, any suggestions from your camp.....?
<8> wizo: firstly try to run it as root, not with sudo
<9> oh
<11> Grub starts: but when the device mapper created the devices, and it wants to start my partition it hasnt been created yes. Yust the name sil_foo exists, but none of my sil_foo[1-9]
<13> do somebody has a strange problem with nvidia-glx and xorg-server ?
<9> Peper: still the same error =/
<8> i don't know if it could change anything but try ;D
<14> keikoz: They block each other by me
<13> [blocks B ] >=x11-base/xorg-server-1.0.99 (is blocking media-video/nvidia-glx-1.0.8762) <== u have this message, but i just unmerged nvidia-glx and xorg-server !
<13> yes, same
<9> yea, no difference, Peper
<1> keikoz, emerge --meta
<1> hum i think its meta, sec
<11> any idea SmileyG ?
<1> keikoz, emerge --metadata
<8> wizo: could you paste the error somewhere
<1> not sure SauL2 .... :-/
<13> mmh what should it do? i dont understand what the manpage explains
<15> wtf is amarok?
<1> the metadata keikoz ?
<16> hey, got a weird problem, don't even know which # to ask in: turned on my machine today (gentoo/2.6.13) and there's a bright square on the halfway down against the right side of my monitor - like an overlay, and any window that goes under it is brightened, wtf?
<13> yes
<1> it rebuilds the portage tree and database, without resyncing online
Return to
#gentoo
or
Go to some related
logs:
dpkg-reconfigure fontconfig-config
pam-login block shadow
generating digest apache hangs
ubuntu php_pdo sqlite3
#perl
xorg.conf modeline pt813
configure screensaver ubuntu
suse9.3 xinetd not running
mplyaer+ubuntu
libdvdcss2 x64 suse 101
|
|