| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55
Comments:
<0> stoddardka: besides, ext2 is pretty crappy as well
<1> LSD`: well obviously you wouldn't be able to trick it into installing onto it
<1> LSD`: its ok though
<2> Hell-Razor: you need usb-storage support, either modprobed or statically linked into kernel.. you'll need scsi support for that to work, as well as whichever of {u,o,e}hci_hcd is applicable to your system
<0> stoddardka: for cross-OS interoperability, ext2 is muc, much better than FAT
<3> LSD`: better than vfat at least
<2> Hell-Razor: with all that done, when you plug it in you should get a message in dmesg about it, and another a few seconds later about a /dev/sd* node being created for it.. then you can mount it
<4> gnite
<5> Triffid_Hunter: i have it all enabled in the kernel
<5> Triffid_Hunter: dmesg says a lot of stuff like this "usb 1-3: new high speed USB device using ehci_hcd and address 10
<5> " and it coutns up to like 120 or something then restarts
<0> mortem: All the FAT variants **** as bad as each other
<2> Hell-Razor: sounds like a weird hardware issue to me..
<3> LSD`: lol sure
<6> http://rami.homelinux.com/xorg.conf http://rami.homelinux.com/glxgears.txt http://rami.homelinux.com/glxinfo.txt http://rami.homelinux.com/Xorg.0.log
<5> Triffid_Hunter: very
<6> I'm getting those errors using GLXgears
<6> Er, That's my conf, glxgears output, xorg.log
<6> After ytying to use nvidia drivers
<2> Hell-Razor: do you have it connected via a usb hub?
<6> Xorg works! but glxgears and anything opengl does NOt
<5> Triffid_Hunter: no just a usb port
<7> When a package seemingly disappears from portage (for example eselect-php), and it was emerged, Is it still installed and unable to be uninstalled without manual labor?
<1> patiently waits for xorg-server to compile
<2> mizery: emerge -avC should still work
<1> mizery: the package will still remain in portage until you uninstall it
<8> can i change my cflag march=pentium3 to pentium-m?
<1> mizery: no manual labor
<8> will i have to make any changes else where/remerge enthing?
<0> eliasz: if you're running gcc 3.4 you can
<8> LSD`, how i check verion, just eix?
<0> eliasz: gcc --version
<7> Triffid_Hunter, stoddardka Well then I guess my only concern is that "esearch -I <packagename>" doesn't seem to list it
<5> Triffid_Hunter: i am very confused i have everything in the kernel
<5> ..i think
<1> mizery: its sitll there
<2> mizery: see if its listed in /var/db/pkg/ somewhere
<8> lsd: version runnig is 3.3.6 but eix says Installed: 3.3.6 3.4.4-r1...can u change to 3.4.4...is it worth it?
<1> mizery: you just cant remerge or update it anymore
<2> eliasz: i've been running 3.4 for a while now.. you get more march options, and it works beautifully.. there are upgrade guides for making the change
<1> brags gcc4.0
<8> Triffid_Hunter, cool, ill look into it over the weekend, for now, wana figure out how u get 3dfb/fm to work, are they even worthwhile, they look fun, but i duno, fb would be better if it didnt show hidden files
<1> I wish gentoo saved all the compile times by default
<9> stoddardka: you could make it
<2> stoddardka: /var/log/emerge.log ... emerge -avt genlop to list them
<0> stoddardka: it does, in a matter of speaking
<1> LSD`: how
<0> stoddardka: emeger start and finish times get recorded in emerge.log. Install genlop and you can use it to work out the time taken
<1> cool
<1> sweet genlop is awsome
<10> hi all
<11> how come XMMS won't play audio streams?
<12> anyone know how to stop dlopen from spewing undefined symbol messaged when I run X -configure or startx?
<10> quick question - dual monitors using a single GeForce5200FX card (dvi and regular) and using Twinview in my xorg.conf
<10> all works great
<10> except mplayer, when run, is stretched wide and i can't resize it to proper dimensions
<10> ideas?
<1> pdxkid: mplayer.conf has values for monitors
<10> cool beans - i will check there now
<10> thanks
<13> pdxkid: hold up a seocond
<9> D2DChat: XMMS is old
<14> reisio, u suggest somethin else? ive used xmms 4ever
<11> reisio, lol, what do you recommend then?
<14> cept now it wont play audio cds lol
<9> cOff3eBuZz: I have mplayer & audacious
<1> woot xorg-server... done!
<1> restarting x... brb
<9> but xine would probably work as well
<15> cpw: !! =)
<13> pdxkid: you need to set the DisplaySize in your monitor section in the xorg.conf file
<16> what does chown root:users /usr/src do?
<17> it changes the ownership of /usr/src to root, and the group ownership to users
<13> brenden12822: make your system vulnerable
<10> YeTr2, i think i have that set - everything works great except mplayer
<14> brenden, changes the ownership of /usr/src to user root and group users
<18> brenden, it should be chown root:src /usr/src
<19> gah
<16> YeTr2: Im trying to install ProFTPD should I use that command?
<13> pdxkid: you need to enter 2x the width of the display size to compensate for the fact you have 2 monitors instead of 1
<13> brenden12822: why proftpd?
<10> YeTr2, haha - that makes sense - thanks kindly, i will track that down now
<16> YeTr2: because i found a really simplified tutorial for it...and im a beginner. should i learn something else?
<13> brenden12822: was the tutorial written for gentoo specificially?
<18> brenden, also, chmod 2775 /usr/src
<16> YeTr2: No...im just kind of making up my own steps to make up for it being written for RedHat...not sure if that will work
<3> i'm having a problem emerging firefox 1.5-r9 it says ac-wrapper: /usr/bin/autoconf-2.13 is missing or not executable
<2> brenden12822: you shouldn't need to touch /usr/src to install an ftp server.. emerge -avt proftpd, and look at all the files it installs into /etc for its configuration
<14> mortem, do a ls -al /usr/bin/autoconf* see what versions u have
<13> brenden12822: try to search for installation docs pretaining to gentoo, alot of stuff maybe the same, but there are differences between distros
<17> How do I mount a drive at boot (auto) and have my normal non-root user have write access to it?
<13> brenden12822: if you really want ftp, there is a doc for vsftpd somewhere on gentoo.org
<2> FoW: depends on filesystem. if a windows filesystem, check man mount for fat options pertaining to permissions. if a linux filesystem, chmod
<3> cOff3eBuZz: 2.59
<14> FoW add umask=000 to fstab options
<14> FoW actually
<16> YeTr2: Oh cool i found it on gentoo-wiki. is vsftpd better?
<17> Triffid_Hunter, cOff3eBuZz, ty
<20> is there any good educational packages for math in Gentoo (CLI only)?
<2> brenden12822: i use vsftpd, and have had zero problems with it.. i've never tried proftpd so I can't compare
<14> umask=0133,dmask=000 is what i use on my windows ntfs partition
<10> YeTr2, i am combing my xorg.conf (not my favorite file i must say) and i dont quite see where this size is set
<13> brenden12822: there isn't supposed to be a 'better' as 'better' is an opinion
<13> pdxkid: under the monitor section for the primary monitor
<16> Triffid_Hunter: is vsftpd easy to install?
<21> sifi-xz: Why not just search packages.gentoo.org in categories?
<2> brenden12822: asking if something is "better" will get you varied answers, because "better" isn't an absolute, but rather a function whos variables include one's particular wants and needs
<22> if i'm using vi to search for any string DS (even if in the word DSApplication) and replace it with nothing, should :s/DS//g work?
<2> brenden12822: I found it as easy as postfix, in other words it couldn't get much easier
<2> stephen_: yep, but I think you need a % in between : and s to make it do the whole document.. i still prefer nano over vi for simplicity so don't save unless it looks right ;)
<23> the p 233 has been updating the portage cach for 40 mins lol
<17> stephen_, make it :g/DS//gs with whatever Triffid_Hunter said
<17> stephen_, add a c at the end if you want it to ask you for each instance
<22> Triffid_Hunter, i've not liked nano out of the box but i didn't like vi till i gave it a serious try :) thanks for your help i'm sure that'll do the trick
<22> thanks! DSApplication becomes Application
<24> I was made mad.As root, firefox and urxvt can start quickly,change another user, firefox and urxvt start slowly .
<12> x module loader is failing
<3> how many automake' do i supposed to have?
<0> mortem: a lot
<12> mortem: many
<3> i'm missing 2.13
<3> and icant find it via emerge
<0> mortem: it's probably there, you just need to set a variable to enable it
<3> LSD`: where please?
<25> mortem: there is no automake 2.13
<26> okay... I got a real doozy of a problem for y'all.
<3> Ginsu_Squirrel: ac-wrapper: /usr/bin/autoconf-2.13 is missing or not executable
<25> autoconf != automake
<26> bind is bringing over the dns, yet I can't get any ping responses out of it (the firewall and iptables are unloaded)
<14> mortem, tried emerge -va =autoconf-2.13 ?
<0> mortem: gentoo installs half a dozen versions of tools like that along with a wrapper script that lets users (and ebuilds) choose between them
<26> ping works fine from the server on eth1, but plugging someone else in through eth0 resolves the dns, but cannot ping yahoo
<3> Ginsu_Squirrel: cOff3eBuZz ok 2 sec
<3> cOff3eBuZz: emerging it
<26> anyone have any ideas?
<3> cOff3eBuZz: i'll see if firefox emerges now
<26> anyone need to see conf files?
<10> YeTr2, Is this the line? : ModeLine "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
<13> pdxkid: no
<11> hey I tried to play a song in audacious and it didn't work.. could it be that my sound card hasn't been configured properly in the kernel?
<13> pdxkid: Section "Monitor"
<10> i have hardly anything under that
<10> can i pastebin it?
<3> cOff3eBuZz: working thanks
<14> mortem, np
<27> i'm recompiling my kernel. i've run 'make menuconfig' and 'make'.. i forget the next step
<10> YeTr2, sorry, forgot to add your name. Can i pastebin it? i have very little under monitor
<11> Eighth_ms, restart
<11> lol
<13> pdxkid: just put the DisplaySize in the section
Return to
#gentoo
or
Go to some related
logs:
#bash
#ubuntu
#linux
#javascript
conf ubuntu projector
python edit configparser on the fly
#openzaurus
atack 100
#perl
#fedora
|
|