| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55
Comments:
<0> marienz: yes
<1> DUMAiSO: yes. if you look at the link I've put in the topic you'll see a full list of packages whose files are actually installed and present as part of the environment that the new LiveCD provides
<2> darkschneider: unfortunately, yes.
<3> why when i run my init scripts i get warnings like
<3> * Service 'syslog-ng' already provided by 'logger'!;
<3> * Not adding service 'syslog-ng'...
<0> marienz: so how do i get back "inside"
<4> i have a question does gentoo x86 stage3 block any ip packets on a defalt install ?
<4> i mean, is there a firewall tehre
<2> cruz: chroot /mnt/gentoo/ /bin/bash
<5> AlefBet, thanks - i don't know why i couldn't get that to work O.o
<1> DUMAiSO: it's supposed to be able to simply copy these files into your chroot directly (rather than compile said packages from scratch inside the chroot)
<2> nimeni0: there is no firewall, but there are no running services either. For most systems that is sufficient.
<6> marienz: thanks a lot! :) you was very clear :)
<0> marienz: scratch that, yeah i got it
<0> cross your fingers
<7> kerframil, i see... but is there any change in performance?
<8> murph: no prob. I like answering C++ questions. (I'm weird like that.)
<4> i'm trying to run a counter strike 1.6 dedicated server on gentoo, anybody tried that before and can help me ?
<1> DUMAiSO: on x86? not really (you'll get generic i686 optimisations rather than processor specific). if it bothers you you can always rebuild later.
<1> DUMAiSO: you probably won't notice any difference.
<7> kerframil, ok... thanks for the information
<1> DUMAiSO: let me know if you find out anything further
<5> AlefBet, I'll remember that - I'm writing quite the complicated program, using pthreads, sockets, port IO, etc and i'm mostly self-teaching the C++ as i go, lol
<7> kerframil, you will
<9> Hey. I'm trying to emerge hal 0.5.5.1-r3, but I keep getting a coupla hundred errors like this: "jade:/usr/share/sgml/docbook/dsssl-stylesheets-1.79/html/../common/dbtable.dsl:224:13:E: 2nd argument for primitive "ancestor" of wrong type: "#<unknown object 8143536>" not a singleton node list" - this is the topmost error I could find, but the actual error might be further up still
<9> can anyone help?
<10> why does mc output look broken on my text-mode console (im missing the | and - bars)
<10> but look ok in gnome-terminal
<10> mc -a also looks fine
<10> how can i fix this ?
<11> Milridor: seems i found my error =)
<12> marienz: i moved it and it works now
<13> movi: using a weird console font?
<2> Chrisid: yay! thanks for confirming that file really shouldn't be there :)
<14> how do i make modprobe actually find my module? its there but its not finding it
<2> now if only I knew how it got there...
<12> and thank you for your time :)
<13> movi: as in, are you?, and if not maybe it would help if you did...
<4> no athlon xp stage 3 2006.0 ?
<2> Smo|{e: any clues in dmesg? is it available for the kernel you're running (uname -a is your friend)?
<15> ::sigh::... file not found, apparently grub wasnt done right :o
<15> i kinda wanna cry a little
<0> :P
<10> BCMM, i havent changed anything from the dafult gentoo look
<14> marienz: not really sure, i updated my kernel, compiled fine, and then i compiled my new module and put it on the right place, but modprobe says it cannot find it
<10> BCMM, i also dont know how to change the font. any help would be apprecieated
<2> Smo|{e: esp. if you put it somewhere by hand running depmod might help.
<16> hey! i'm trying to do a portscan with nmap on my own pc via my public ip... but somehow, it isn't working.is this impossible?
<2> Smo|{e: if all else fails insmod (and probably modprobe too) accept a full path.
<13> movi: turns out i don't have MC to test it, but i can find out how to change fonts... i knew yesterday...
<17> how do you change the inter ip on ur computer?
<18> Can anyone help me with a problem?
<2> Krillancello: just ask
<14> marienz: thats the strange things, modinfo works with the full path, but modprobe still saying that the module is not found, alltrough the file is there
<10> BCMM, it would be very welcome :)
<2> Smo|{e: nothing at all in dmesg? occasionally modprobe will fail with a less than informative error message in case of a version mismatch or the like.
<14> marienz: i got it working with depmod now, i guess... thanks!!!!
<2> oh, ok
<18> Well, first off, aren't the contents of /usr/src (I use a Minimal Install CD) supposed to be in the stage file?
<2> Krillancello: no.
<2> Krillancello: you'll emerge your favorite set of kernel sources later.
<14> marienz: yeah, its working, thanks!!! :)
<13> movi: setfont file
<13> movi: file is a font
<18> I must have missed something in the handbook...
<10> where do i find the fonts ?
<13> movi: there are some fonts in /usr/share/consolefonts/
<10> and how do i make it permanenet ?
<18> Lemme read it again. ._.;
<13> movi: i don't know if it will help
<10> permanent
<2> Krillancello: what bit of the handbook are you stuck on (url preferred)?
<13> movi: i don't know; there is a setting somewhere
<13> movi: but i don't know if it will help because i don't know if the source of the problem is a font which doesn't have the right characters...
<17> how do i change the inter ip on my computer
<18> http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?part=1&chap=6 Here's the URL (the 'Configuring the Kernel' page linked to at the bottom is also part of it).
<18> I finished going through what I needed to do from that page.
<18> And went on to the Configuring the Kernel page.
<13> movi: /etc/conf.d/local.start is a good place for any misc. command you want to run on boot, but be careful with it.
<18> And then it said to look for /usr/src/linux.
<4> no 2006.0 athlonxp stage 3?
<19> re, i wanted to setup software-raid with my SATA Discs. my system runs on an IDE-Disc.I emerged 'raidtools', compiled the Kernel-RAID-LVM tree built-in, Device Mapper tree is deactivated. But when it comes to look for MD Devices, i cant find anything in /dev. What did i miss?
<18> Oh. No wonder.
<18> The kernel emerge was on the same line as that damn USE flag.
<18> >_>;
<20> what do I p*** to ls to make it list just directories in a directory?
<1> Androo: try: find -type d -maxdepth 1
<10> BCMM, tried changing, same thing. the font changes but the characters are still missing
<18> Hm... Can you do a find without the directory to search parameter? (I've never done so, so I wouldn't have checked into such.)
<19> Androo: look for 'ls -p /' and for 'ls --help' in special cases
<21> Hello
<22> lo
<13> movi: well, i don't know... sorry i don't have mc to test
<21> does anyone know a good way to benchmark filesystem performance
<21> or a good benchmark app
<10> BCMM, cool. if you find something ill be here
<19> cheater-conrad: hdparm
<4> i installed a cstrike server for lan, but it refuses to show up in lan games... any ideas ?
<13> cheater-conrad: i found quite a list of FS benchmarks with emerge -S benchmark
<23> nimeni0, yes, connect it to the lan
<4> Invis it is connected, i can join with connect <ip> but it doesn't show up in lan games and i dont want that
<23> nimeni0, well check the configs, maybe it is something set there to now show it in public?
<24> does anyone know how vi works?
<24> as in its inner workings
<14> marienz: got a problem back again, after depmod /lib/modules/2.6.15-r5/misc/vmxnet.o the modprobe vmxnet worked just fine, now i rebooted and its nor working.... how to i "store" whatever depmod does?
<2> Smo|{e: it should already be (unless your upgraded kernels again)
<14> nope, i just rebooted, mmm
<24> i just shutdown my computer immediately (ie power go bye bye) and i saved my file multiple times, but when i booted back up, all of my changes were lost
<24> my file i was writting in vi
<24> i'd been using gcc on it and everything
<24> my a.out is even missing
<2> tuxgotagu: that sounds like the fs wasn't synced to the drive yet. Not something vi can do much about.
<25> Hi I am new to gentoo ...can anyone tell me if there a wx-console for gentoo
<24> thats what i was afraid of
<2> tuxgotagu: shut down cleanly to prevent this.
<26> hi all
<2> porkpie: define wx-console
<20> whats a command to archive the files in a directory that have not been modified in the last 30 days?
<27> porkpie: do you just mean a gui cli interface?
<26> anybody installed succesfully amarok 1.4 beta??
<24> heh i know, i'll kindly go tell my wall to give me constant power ;-)
<28> Androo: I'd write some kind of shell script to do it
<4> Invis it's set up with +sv_lan 1.. that should be enough
<25> bacula wx-console gui interface
<4> so nobody here knows about cstrike servers?
<27> hehe
<29> quick question - how to unmask fileX?
<14> marienz: i if do depmod module1 then i can modprobe it, but if i do depmod mod1 and then depmod mod2 the modprobe mod1 does not work.... guess its not storing the config or something
<24> any way to recover it, or am i just going to debug again?
<26> nimeni0: cstrike on #gentoo?
<18> Can anyone tell me how wx packages differ from non-wx? (Such as wxgtk vs gtk)
<30> nimeni0: i know little
<4> mtyhome well suggest another channel
<0> marienz: soo now if i try to boot fromt he cd, since apparently the grub.conf isnt right, it keeps freezing at the "Copying read-write image contents to tmpfs"
<31> NaeRey: how is it masked?
<4> why the hell doesn't it show up on lan games ? :(
<2> porkpie: bacula has a wxwindows USE flag. If you have that flag enabled emerging bacula will probably install the ui you're looking for.
<32> where would i look for a 2004.1 livecd image?
<26> nimeni0: sorry pal i just don't play cstrike anymore ;)
<29> goldfish, normal mask, not hard masked, i believe
<33> hum... strange...
<2> porkpie: (not 100% sure since I don't use bacula myself)
<33> something must be broken in my gcc install
<31> NaeRey: echo "category/app ~x86" >> /etc/portage/package.keywords (presuming you are on x86 arch)
<2> Smo|{e: afaik you shouldn't run depmod on a module, you should just run depmod.
<33> CC="cc" emerge pam works...
<29> yes thanks
<2> Smo|{e: I'm no expert on modules though, I tend to avoid them.
<24> marienz: thanks for the help
Return to
#gentoo
or
Go to some related
logs:
laleger
remote install fc5
sigc apt-get
how to setup twinview
proview xorg.conf
wizard123
#suse
shell text editor suse
fastest fedora mirror
debian apt-get update file size limit exceeded 0%
|
|