| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29
Comments:
<0> how can I boot on the latest kernel
<1> Alija_: that menu thing, grub, that appears for a few seconds controls which kernel you boot
<2> nice, i fixed my nividia on fc5, :D
<3> if you want the new kernel as your default, and if you installed system-config-boot, then go to System - Administration - Bootloader
<3> otherwise you get to edit your grub.conf by hand
<3> or I suppose you could install system-config-boot from yum, too
<4> digdug: try as i might, I cannot even get to init 3
<4> no matter what my instructions to grub are
<4> it always attempts to startx
<4> or, that is how it appears to me
<3> edit /etc/inittab, then
<4> did that
<3> then it shouldn't be attempting to start x
<4> i never get past udev
<0> digdug, i installed system-config-boot.
<0> but still
<4> what is the config program to make it autodetect my video card and monitor to write the xorg.conf /
<4> ?
<0> i can still see only 2 choices on the list, other(the windows) and 2054..the old kernel
<0> and i dont see 2080
<3> alija_: try rpm -qa kernel\*
<3> see if it even installed
<5> how do you remove Real Player 10 Gold from my system?
<4> another thing... when the screen stops, the computer is still thinking
<0> kernel-2.6.15-1.2054_FC5
<0> shows me only that one
<4> I attempt to CTRL+ALT+F1, but no goo
<4> good
<3> then the new kernel never installed
<1> JordanN: system-config-display --reconfig
<0> how come, i downloaded 16mb
<0> + installed it i think
<3> no idea, try installing it again
<3> "yum update" should work
<3> as root, of course
<5> how do you remove Real Player 10 Gold from my system? when yum emove Real Player 10 Gold does not work?
<3> or sudo
<5> how do you remove Real Player 10 Gold from my system? when yum remove Real Player 10 Gold does not work?
<4> crazy thought: CD 2 failed the media check
<1> TuffPoo: was it an rpm you installed?
<4> install itself didn't complain
<5> yes
<0> digdug
<4> is there some chance a file was corrupted, but never got noticed?
<0> look the output log
<0> ---> Package kernel.x86_64 0:2.6.16-1.2080_FC5 set to be installed
<0> Running Transaction
<6> JordaN what gfx card do you have?
<0> output view*
<0> Installed: kernel.x86_64 0:2.6.16-1.2080_FC5
<0> Cleanup Download Packages
<1> TuffPoo: "rpm -e RealPlayer" I think
<0> see
<3> alija_: the problem is fedora doesn't think it's installed
<5> fedorared: 1 sec my pizza is rdy dont want it to burn
<0> what should I do in this case
<0> load it manually
<3> try reinstalling it again
<0> ??
<0> i did it already 2 times
<3> hmm, yeah, install the rpm manually then
<6> yum...Chinese noodles in China
<0> I never installed the rpm manually
<3> maybe "yum install kernel-2.6.16-1.2080_FC5" would work?
<0> http://download.fedora.redhat.com/pub/fedora/linux/core/updates/5/x86_64/kernel-2.6.16-1.2080_FC5.x86_64.rpm
<0> is this one ok
<5> Fedorared: # rpm -e RealPlayer
<5> ls: /usr/local//share/locale: No such file or directory
<3> looks like it
<0> how do i download it and install it
<1> yum install yum-utils; yumdownloader kernel
<1> TuffPoo: looks like bad packaging by real, I don't know
<0> where is the kernel located usually
<3> on /boot, I think
<4> ran system-config-display
<4> it attempted a fresh config, got to display 1 (which should be my PCI graphics card)
<5> Fedorared: i got it thanks man!
<4> it reported "connection reset by peer"
<7> anyone have an app they recommend for reading .ics files (iCal) from a website in Fedora?
<7> Evolution I just can't seem to get to work with the files on a remote website
<4> on X server :17.0
<8> how do u use yum to install a tar.gz that you have already installed?
<1> citizen_blank: remove the installed tarball package and "yum install whatever"
<7> citizen_blank: you don't -- .tar.gz is a compressed file -- yum is used to install RPMs from a server
<4> citizen _black; yum doesn't handle tar.gz
<5> Fedorared: can yum install the MPlayer media player?
<1> TuffPoo: yeah with rpm.livna.org repository enabled.
<3> TuffPoo: if you have the livna repositories installed
<0> there is nothing to configure in system-config-boot
<0> except default time
<9> Ok! Sound fixed. Modem working. Another 2 problems.
<9> How do I get FC-4 to tell me my available RAM ?
<1> RadSurfer: free -m
<9> thanks
<4> i just attempted a reinstall
<4> as before, anaconda reported that it could not open display :1
<6> what is your graphics card?
<6> if it doesnt pick it up on the graphical installer install the system through linux text
<4> nvidia geforce mx 4000
<9> I have a peculiar problem HELP! when I launch Terminal, try launching any gui app, I get an xlib :0.0 warning, WHAT is this about ?
<6> ok...
<6> type this..
<3> the same card I fried about 6 months ago :'(
<4> valehru: I installed it earlier using the text installer
<3> now I have to use my awesome TNT2 until I can afford a replacement
<4> i was given mine by a church friend
<6> rpm -ivh http://rpm.livna.org/fedora/5/i386/livna-release-5-4.noarch.rpm
<4> i upgraded from a Riva TNT
<4> i have already installed the livna repository
<4> and installed the kmod-nvidia
<6> then do this
<10> evening all I'm in the process of upgrading from 3 to 4 via yum when it crapped out on me with transaction check errors, like the following: file /usr/bin/gcc32 from install of compat-gcc-32-3.2.3-47.fc4 conflicts with file from package gcc32-3.2.3-6, suggestions?
<6> yum install xorg-x11-drv-nvidia kmod-nvidia
<4> done
<6> did you reboot afterward?
<4> unfortunately, yum reports "fatal: module nvidia not found"
<6> have you been screwing around with xorg.conf?
<4> http://forums.fedoraforum.org/forum/showthread.php?t=102026
<4> is a thread (with no replies :( ) about my problem
<4> i have outlined the whole thing with as much detail as I have
<6> either your card isnt supported
<11> JordanN: this is an SElinux issue
<11> JordanN: let eme find you the bug report and fix
<4> evilbob: i wondered if that was possible
<4> how do i disable SELinux? is it a service?
<4> i will re-enable it when the dust settles
<11> JordanN: http://bugzilla.livna.org/show_bug.cgi?id=843
<12> Tek-69: Easiest way I have found to fix those is to remove the offending packages, do the upgrade and then reinstall anything you need
<11> JordanN: better to fix the problem and learn to deal with SElinux than disable it
<10> Vimes: but its gcc is that safe?
<4> that bug shows a simple acceleration not working type bug
<4> I can't even boot
<4> not even to a console
<3> tek-69: I don't believe you need gcc unless you need to compile something
<9> ANYONE know why Terminal would not be able to launch a gui app?
<11> JordanN: just try it... please
<10> digdug: i agree as long as a new gcc is gonna replace it:P
<12> Tek-69: Should be fine, just check what other packages are also going to be removed when you remove gcc. You will probably want to reinstall them afterward
<13> hi. guys, how do i enable daylight saving on fedora? i need to switch timezone from IST to IDT .. and tzselect does not accept such timezone :)
<4> "chcon -t texrel_shlib_t /usr/lib/xorg/modules/extensions/nvidia/libglx.so.1.0.8178" ?
<11> poncha|laptop: IIRC it should be automagic
<11> JordanN: I think that is it yes
<3> I'm just patiently waiting for accelerated ati support for my x86_64 machine
<10> Vimes: aight thanks
<13> EvilBob, well, it did not happen.. time one server is now one hour behind the schedule :)
<0> what do i need to be able to mount a ntfs hda
<13> EvilBob, all of my debian boxes did switch to IDt tonight, but not fedoras... i dont really know how debians did it, cause i did not do anything special about it :)
<0> filesystem *
<1> Alija_: see fedorafaq.org
<11> Alija_: http://fedorasolved.org/post-install-solutions/ has an ntfs tidbit for you
<14> hello all
Return to
#fedora
or
Go to some related
logs:
sendmail + spamassassin + sender = Service unavailable
wesw02
#lisp
#linuxhelp
homucidul
1200x800 grub.conf console
define jebot
#sdl
web based irc client quakenet
CentOS Unable to create temporary printer
|
|