| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
Comments:
<0> do them all individually, for the SATA devices, add -d ata
<1> smartctl -a /dev/hda
<1> like that? hwo to check memory :O or
<0> check memory with memtest86+
<1> k reboot
<2> boot off install media (cd or dvd) instead of pressing eneter type memtest85
<2> boot off install media (cd or dvd) instead of pressing eneter type memtest86 enter
<0> or just install the memtest86+ package and select it from the grub menu
<0> you'll have to run memtest-setup once, though
<2> drnick cool i didnt know about that package
<3> Anyone here used user mode linux? :p
<2> ???
<4> Can anybody give me any info on performance differences between FC4 and FC5 on the same hardware?
<4> For a webserver?
<5> i would expect this would be relative to hardware
<2> jhutchins, read the fc4 and fc5 releasenotes
<2> that will tell you the differences between fc and fc5
<4> daMaestro: Same hardware.
<6> I want to download fc5 via torrents. Do any of you know where to do that
<5> and i would expect the performance of both to be relative to the hardware
<2> tarelerulz, type /topic
<4> Doing a hardware upgrade, need to know whether to do software as well.
<5> tarelerulz, so to answer your question.. I dunno.
<6> I found it
<6> on the fedora core site
<4> daMentor: Some releases get heavier, some get lighter. Some run faster on the same hardware, some run slower.
<7> hmmm don't understand why I keep getting those deps for DVD::rip
<6> if I did manual install
<2> Distro^Junkie, what repos do you have enabled
<8> jhutchins: httpd didn't change all that much.
<4> We're still 2.6 kernel, so that probably won't change.
<4> PHP & MySQL are the same, right?
<6> I could not have l LVM
<2> tarelerulz, ????
<7> core, dries,extras,flash,jpackage,livna,macromedia,updates
<8> jhutchins: read the release notes, distrowatch.com, etc
<6> The reson I ask is this line in grub config file
<4> Ok, probably not a big deal then. Thanks.
<4> Silly, me, asking on irc.
<2> dries conflicts with extras and livna
<6> /dev/VolGroup00/LogVol00
<7> ahh ok
<7> thanx for the info Southern_Gentlem
<2> which i asked you before
<6> and I don't know how to use that system to point grub to second hard drive
<7> must of missed it Southern_Gentlem
<7> sorry
<2> Distro^Junkie, what happens when you disable dries and retry
<6> I want to have fc4 on hard drive with windows and fc5 on small second dirve
<7> trying now Southern_Gentlem
<9> core, extras and livna are all that are needed
<9> the rest are unneeded fluff
<7> hmmm says transcode conflicts with it
<7> take out trascode and try again
<7> transcode*
<2> rpm -q transcode
<2> tarelerulz, so use the custom install
<7> now it works :)
<6> does fc5 have custom install?
<2> Distro^Junkie, i really wanted to see the rpm -q transcode
<6> I don't remember
<2> tarelerulz, yes
<6> ok
<7> sorry Southern_Gentlem
<6> I just did not understand how /dev/VolGroup00/LogVol00
<6> works
<7> I used yumex to remove transcode
<2> tarelerulz, what does it matter if you put it on a different drive
<6> Well, I have fc4 the way I want it
<6> so far
<6> and I wanted the new one on different try
<8> tarelerulz: it maps to volume "LogVol00" in the group "VolGroup00". http://www.tldp.org/HOWTO/LVM-HOWTO/index.html
<6> Well, if I don't use that sue
<6> system
<6> coud I use /dev/hd1,1
<6> in grub to tell it where the kernel is
<6> on different hard drive
<2> tarelerulz, you are making no sense
<6> I want to make gurb config
<8> tarelerulz: you have a FC4 Win dual boot on this drive and you want FC5 on another drive, correct?
<6> that boots fc4/winodws drive and fc5 on second drive
<6> Yes
<2> fc5 install should do that
<8> Yes, but getting the grub config back over to the FC4 drive is the interesting part.
<6> Well, if I rebooted
<6> would it just start over
<8> tarelerulz: when you reboot it boots from the FC4/Win drive.
<6> ok
<8> tarelerulz: you could configure grub to chainload the FC5 drive so you don't have to copy grub config over from the FC5 drive.
<6> I could config that grub to see the other hard drive and boot fc5
<2> tarelerulz, yes
<2> the installer actually should do that
<6> I did not think I could go to fc5 and from there boot back into fc4
<6> I just wanted the grub config file
<2> tarelerulz, pay attention to what you are doing during the install and make sure you select custom and you install on the correct drive
<6> to have fc4 , Windows and then fc5
<10> Has anyone observed problems where by a postfix server is unable to open virtual config files (/etc/postfix) irregardless of permissions or user/group?
<8> tarelerulz: the FC4 drive is your boot drive.
<6> I will
<6> yes
<2> do not format your /boot parttion
<8> Southern_Gentlem: you going for a shared /boot ?
<2> fedorared, i think its almost a given
<2> i would have to test this myself
<8> Southern_Gentlem: not quite. you could keep them separate and chainload boot the FC5 one
<2> coin flip at this point
<11> how to i rename hlds_l_3111_full.bin?key=0EF962AAA02A91D1F5E22D6EBA911682
<11> to hlds_l_3111_full.bin
<9> mv
<9> mv hlds_l_3111_full.bin?key=0EF962AAA02A91D1F5E22D6EBA911682 hlds_l_3111_full.bin
<11> there
<11> :)
<11> thanks
<9> chmod +x hlds_l_3111_full.bin
<9> ./hlds_l_3111_full.bin
<9> good luck ruining fedora installing that ;)
<2> opsec i give him about 5 minutes
<11> [r3vld@WH-S0543 hlds_l]$ tar -zxvf 15_full.tar.gz
<11> gzip: stdin: unexpected end of file
<11> tar: Child returned status 1
<11> tar: Error exit delayed from previous errors
<9> pastebin.com
<11> same error all
<11> sorry
<9> and we don't deal with that file here
<11> same error all the time
<9> you are on your own with that
<11> gzip: stdin: unexpected end of file
<11> tar: Child returned status 1
<11> what does that mean
<9> see previous statement
<2> r3vld, do you know what the pastebin is
<9> it means the file is corrupt
<9> or incomplete
<11> seems like all the mirrors have corrupted files
<2> r3vld, do you know what the pastebin is????
<9> that file is NOT from an official fedora mirror
<9> that is a fact
<2> i suggest you use the link i justed posted from now on or you will be banned
<12> =/
<2> r3vld, why for are you trying to nuke your system
<11> lol
<11> nuke
<9> it's a learning process ..
<10> I can't seem to enable access for postfix to readin several mysql-config files in its config directory (/etc/postfix). It has the same user/group and permissions as everything else.
<11> ohhh
<9> one must nuke .. before one learns not to nuke
<2> r3vld, do you know what a pastebin is
Return to
#fedora
or
Go to some related
logs:
openbsd upgrade-perl
#python
Call to undefined function socket_create_listen()
edit folder permissions ubuntu
#python
gentoo passwd: Critical error - immediate abort
installing ipon nano problem
#css
ImportError: No module named rdiff_backup.Main
nagios powerpath
|
|