| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Comments:
<0> henshaw: did you try just removing the kdemultimedia package, and redownloading/installing it?
<0> shaunm, Have you edited your xorg.conf
<1> shaunm: you should be used to custom modelines by now then
<1> but why 71Hz?
<0> really... isn't the normal 70 or 75?
<0> (I don't know, I use LCDs)
<2> CodyDH: yup
<2> roguedaemon: 71, 72, whatever. 76 is too high
<2> hell, 70. I can't get it to do 70 either
<0> can you get into a GUI at all
<1> what about 75
<2> sure
<2> I edit xorg.conf, restart the gui, see what happens
<1> google for modeline generator
<2> if it's totally broken, I copy my backup back over
<3> CodyDH: i did try something like that, then i went the whole hog and removed kde before reinstalling it from the disk
<2> used to be I could set this stuff in the graphical tool
<1> should be able to most of the time
<4> how do i tell xorg to only use 60Hz on 1600x1200?
<2> well, it doesn't have anything in it about refresh rates these days
<1> try a modeline generator then
<2> the list of generic monitors used to have "Monitor capable of <resolution> at <rate>"
<1> ***uming you have all the specs for your equipment
<2> now it's just "Monitor capable of <resolution>"
<2> and it just guesses the refresh rates now, I suppose
<2> but it's wrong
<4> shaunm: ya i have the same problem
<1> so fix it
<1> shaunm: what release are you running again?
<4> system-config-display needs refresh rates
<2> roguedaemon: FC5 test 2
<1> yeah
<2> XulChris: yeah, agreed
<1> fix it
<2> I mean, it's all wonderful when it can actually detect stuff
<2> but it's never been able to detect my monitor, and probably never will. so just let me set the info
<1> i have never tried a graphical tool, i ***ume you mean gnome?
<2> the tool is not part of gnome
<1> which tool
<2> system-config-display
<2> been around since at least RH9 or so
<1> yeah, never tried it
<5> anyone recommend a good .avi player?
<0> Totem-xine
<1> when it doesnt work i go straight to a modeline generator and do it how i want it
<1> then i backup xorg.conf, cuz theres always something that wants to whack it
<6> anyone have an opinion of where to place a public smb share? as to not conflict with selinux :-)
<1> daMaestro: traditionally exported filesystems get mounted in /export
<6> roguedaemon, I have some extra space on this new server I built for a school. They would like a public SMB share. I personally don't think /tmp is the best location. Should I just rock a dir in /export and share it via smb as a public share?
<5> how can i list the software packages listed in yum?
<5> i want to be able to view the software list
<1> /tmp is not a good location unless you dont want to keep any of the files...
<6> roguedaemon, i just don't want to tune selinux.
<6> roguedaemon, yeah.
<4> xdiscx: yum install yumex
<1> daMaestro: what problem is selinux having with your smb share
<6> I'm just looking for the _best_ place to put it. I could tune selinux.. but I would like this server to have a decent life time, as I don't have time to manage it. It will be replacing their winNT/wingate infrastructure.
<5> XulChris: after i install it, then what?
<4> then run yumex
<1> you shouldnt have to tune selinux to have an smb share
<7> XulChris: man yum -> list
<5> ty
<6> roguedaemon, there are booleans to tune most of what you might have issues with... but I would like to have the home dirs protected from smb using selinux
<1> ?
<6> selinux protects smb
<1> you said home dirs
<6> yeah. so /home is out. I am just looking for another place to use other then /tmp and /home
<1> you wouldnt want it there anyway
<1> ideally it would be another filesystem mounted in /export
<1> not a dir in /export which would be in the / filesystem
<6> so where IYO would be a good location to use?
<1> i just told you?
<6> I will be using the / filesystem
<6> there is just extra space that they would like to use.
<6> part of lvm2 ext3.
<1> not really smart but it sounds like you have your mind made up
<6> not really.. i could resize the / and add another in export.
<1> or sit here talking about it all day :)
<6> smb is allowed to access /export?
<1> smb will do what you tell it to
<6> sure. thanks.
<1> if you configure it correctly you shouldnt have any issues with selinux
<8> anyone knows any tools for rescuing filesystems?
<9> fsck
<10> hey
<1> jave: depends on the type of problem
<8> its an ext3 filesystem on a lvm that ive broken the headers
<10> can some one help me with a quick problem
<1> jave: headers?
<10> well its not really a problem
<10> who wants to take the case?
<10> lol
<11> Heya everyone. I'm running fc4 i just installed xcfe desktop via yum groupinstall xfce. How can I launch xfce from the gui login session list? Its not showing up.
<7> Ezro: we can't heal aids
<1> Ezro: no one will unless you ask a question
<11> I basically want to cfhange my default desk to xfce instead of gnome
<10> lol
<6> hey roguedaemon, how do i resize the / volgroup? system-config-lvm informs me it needs to not be mounted. runlevel 2?
<10> well i was waiting for an "I'll take the case!" kind of thing
<1> daMaestro: heheh
<10> but here goes: im trying to run cstrike server ded
<12> chuckyp, switchdesk xfce
<1> daMaestro: how much extra space are you talking about
<10> and it says to type ./hlds_run
<8> roguedaemon: well, i have a lvm containing a ext3 on a disk in a laptop, and the disk broke, so i tried mounting it on another machine, and in the process probably broke the lvm information
<10> but it says thats now a command wen i try it
<6> 20G
<1> daMaestro: is this a production system?
<6> yeah.
<7> Ezro: chmod +x hlds_run
<1> sounds like it wasnt configured correctly from the start. reinstall.
<6> but this is the replacment system
<11> FRET: switchdesk xfce is stating xfce is not installed however; if I boot into failsafe x I can launch xfce via xfdesktop.
<10> hmm
<6> so this box is not live. i can take it offline
<10> it says no such directory lol
<6> the resize when fine with system-conf-lvm
<10> is hlds_run supposed to be the folder?
<6> just / was mounted. dar.
<6> lol.
<1> jave: trying to mount shouldnt break anything. care to elaborate?
<10> because my folder is hlds_1
<7> Ezro: learn the linux basics before trying to run public services
<11> FRET, and if I try switchdesk xfdesktop it says unrecognized
<10> lol dude im way too busy
<6> then use windows
<10> lol cant
<6> there are HLDS for windows
<11> FRET, any ideas why?
<10> i wanna play on the server lol
<1> chuckyp: xfce is not where switchdesk expects it. try 'switchdesk gnome' and edit ~/.Xclients-default
<1> or change switchdesk-helper
<8> roguedaemon: well I couldnt mount it for some reason. maybe the volume label was the same as that on the system i tied mounting it on. so i stupidly did vgcreate and lvcreate on the disk.
<1> or install xfce where it wants it
<11> Well i'm currently in gnome let me take a looksee at .Xclients
<6> Ezro, you can play on a local server.
<1> chuckyp: .Xclients-default
<10> lol
<6> Ezro, just a matter if your hardware will run the server and the client at the same time
<6> 0 lag too .. mmmm
<10> it wont
<10> thats y i dont use this comp
<1> jave: ok, youre done here i guess
<10> this comp is windows
<10> and i got a linux box
<10> which i use for ftw
<10> ftp*
<10> and wanna use for server
<10> but i cant get server
<8> roguedaemon: ?
Return to
#fedora
or
Go to some related
logs:
load md from mdadm.conf
mainode
pzip ubuntu
#debian
#qemu
postfix isp filters port 25
busybox wget
#perl
banshee crashes on suse 10.1
mplayer + possible port
|
|