| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46
Comments:
<0> chealer: Ok. Just unplugged and reconnected the device. Good news is that the driver is now trying to deal with the device, bad news is it can't find the firmware file - so now to figure out how to point it in the right direction!
<1> will probably work, too. I don't have first-hand experience with that combination, though. grub is just way more comfortable.
<2> asg: that made ono sense
<3> ok, so first you'd need to force mysql-server 5.0 before automatic updates work?
<1> yang: I think it can be started the very same way as a kernel.
<4> angeldodger: sorry, I have no clue about the firmware
<5> asg: no the mysql-server metapacakge is now depending on 5.0, and forces an upgrade
<6> fireba11: if you upgrade from woody to sarge, it won't upgrade to exim4
<6> stew: yeah, just noticed
<2> asg: hehe
<0> chealer: No worries... you got me this far. Thanks for the help - I think I'm 99% of the way there now - but then I always was an optomist... :)
<3> stew,asg: but is the upgrade working for you?
<6> Pooh22: I don't track testing
<5> Pooh22: yes it worked for me
<5> except that it broke mythtv
<3> hmm
<7> hey guys I run my own webserver (apache) and i have a friend who has a site on my box with the url http://dynamic.dns.org/~username/ is there anyway if he buys a domain www.blah.com i can get it to point to that url?
<2> dusty-: of course
<8> dusty-: sure
<2> dusty-: several in fact
<4> angeldodger: you're right, there's a bug in at76c503a-source for not depending on debhelper. I'll try to remember reporting that
<9> beardy, stew: thanks anyway, I've resolved with python. Instead of deleting the first bits and appending new one at the end, now I iteratively rewrite portions of my file seek()ing and write()ing.
<7> hehe cool
<7> how?
<10> dusty-: He has to setup the DNS to point to your box's IP & you twiddle the apache conf to add that domain as a virtual host
<8> dusty-: you create virtual hosts in apache.conf
<7> hrm
<7> so
<1> yang2: google is powerful, FYI. google for memtest86. Quoting the memtest86.com homepage: The test image may be loaded from a floppy disk or may be loaded via LILO on Linux systems.
<1> yang2: so what is your excuse for not looking at the project homepage or using google?
<11> pharm is that possible with dynamic ip ?
<7> if he buys the domain www.blah.com and points it to my IP (which will point to my site and not his) then i setup a virtual host to deal with it, it will redirect to his /~user/ part?
<12> GPT is only for 64-bit OS'es ?
<13> erich: perhaps he does not know google's url :-)
<14> where are located the noflushd logs?
<15> dusty-: yeah the vhost specifies its own document root
<7> ok sweet
<7> thanks
<10> javiolo: Only if you can update the DNS every time the IP changes.
<6> HazyNRG: probably in /var/log
<11> pharm ok I tested a dyndns free service... is the same no ?
<10> javiolo: Or use a URL forwarding setup. You can do it with frames, but its a bit icky.
<11> pharm ouch frames...
<8> i guess linux recognisez 250mb of memory, even if it shows 16mb in bios...I hope it just doesnt crash randomly on some point
<16> Copying large files (scp/sftp) over a dodgy connection - I can't see it in the docs - does sftp support any form for restart?
<14> asg: probably, but i dont't find the filename
<6> HazyNRG: oh, it logs to syslog. Start looking in /var/log/syslog
<7> yag, yang2 guys i havn't got a static ip i use something.dyndns.org
<7> so how can i get him to point his www.blah.com domain to my ip
<7> i would have to use my dns
<7> but how would i do that?
<8> dusty-: domain is pointed to an IP
<7> damnit
<7> how do i get around this
<8> dusty-: if you are using dynamic ip you will have troubles
<7> yes i am
<7> thats the problem
<7> my dsl has dyanmic ip, so i use dyndns.org and have something.dyndns.org
<7> my mate has something.dyndns.org/~user/
<7> and wants to point www.blah.com to something.dyndns.org/~user/#
<8> dusty-: ask on your ISP maybe they give you fixed ip
<7> they dont do it
<14> asg: there's no log from noflushd in /var/log/syslog
<7> they onyl do that on business packages which are stronomical.
<7> astronomical.
<5> dusty-: tell him to make www.blah.com be a CNAME to something.dyndns.org
<7> well im registering it for him
<7> so i could do that
<7> how do i make it a CNAME?
<5> dusty-: you ask whomever is the admin for the DNS for that domain
<6> HazyNRG: then look at the manpage, there is a verbose option
<7> stew im lost now
<5> dusty-: who is hosting the dns for blah.com?
<7> i dont know
<7> i was going to register the domain from www.easily.co.uk
<17> hi all
<7> Stew and the webserver uses its ISP's nameservers in /etc/resolv.conf
<7> ?
<5> dusty-: when you register the domain, who are you going to list as the nameservers? are you going to let the registrar handle the dns?
<7> yes most likely
<7> i dont want anything to do with the dns
<7> i just wanna host the site for him
<7> and he wants a domain
<14> asg: yeah, i ran the daemon with verbose.
<5> dusty-: well you need to figure out who is going to host the DNS, then you need to ask that person to make the CNAME
<7> stew, well if the registra handles it...
<18> hi everybody
<18> whats the difference between linux-source and linux-tree package?
<15> dusty-: most registara also offer dns service i pay 5 bucks a year for dns service
<19> anyone happen to be using remind(1)? does it scale well over time for entering all kinds of events?
<1> nvz: amarok crashed when I clicked on edit track information on the very first file (admittedly, an ogg file...) :-( crap.
<7> so what do i need to do?
<20> I finally found a clear definition of why "aptitude" is recommended when upgrading the distro.
<17> i want to know if is there a way to make that the macromedia's flash plugin don't delay de audio when playing video
<15> dusty-: is the domain registered already ?
<5> Azar: from woody->sarge it was the only non-broken way, afaik
<20> Package dependency problems may occur when upgrading in unstable or testing. Most of the time this is because a package that will be upgraded Depends on a package that is not yet available. Using "aptitude" instead of "apt-get" will fix that
<5> Azar: woody's apt-get had a bug with large circular dependencies
<20> stew, last year when I upgraded from woody > sarge I was fortunate enough to read about using aptitude beforehand
<5> i don't know how aptitude is going to fix a dependency on a pacakge which is not yet available
<7> tty no not yet
<21> Anyone here know how pam_p***wdqc?
<21> -how
<20> stew me either, that's what this howto I am reading say
<4> faber2: read both packages' description to find out
<21> I'm mainly curious as to... Exactly what do the various.. min=N0,N1,N2,N3,N4 options... Actually do?
<18> chealer: i did not understand. which one do i need to "make-kpkg"
<22> so why are .vob's usually exactly 1.0 gb
<22> or <
<15> dusty-: aplus.net is who i am registered with they do dns good service decent pricing ect. ect. all you do is setup the vhost they can do the rest just have to give them the ip
<21> jetscreamer: To make you ask that exact question. ;)
<4> faber2: doesn't the kernel-package doc answer that?
<20> Package dependency problems may occur when installing in unstable or testing. # aptitude -f install "package" they say will override broken dependencies
<22> stew: and dselect did fine...
<20> hmm this looks like forcing a package
<7> tty, so i setup a vhost and that it, reigster the domain and point the domain to my ip
<23> for those of you using dual-heads, what progam is recommended for setting the wallpaper?
<24> jetscreamer: to fit bz or gzipped onto a 1GB USB drive?
<15> dusty-: yep thats it
<7> sweet
<7> thanks
<22> the tre ething is only for if you need it or know what it is
<22> tree
<15> ootput: http://subliminal-hate.org/page.php?6 might be helpful
<25> Why cant i do # lspci # ?
<25> am i missing some package
<24> yang-away: not worthy?
<13> he he
<15> yang-away: not in your path type /sbin/lspci ?
<26> tty: It's in /usr/bin
<25> tty: not such file or directory
<25> its not there either
<24> yang-away: I used apt-file to determine that lspci is in pciutils package and path is /bin/lspci and /usr/bin/lspci
<15> beardy: yeah it is
<25> what is wrong with this #discover# software...last time it recogniyed mt 8139too now it doesnt...
<26> yang-away: Install pciutils then.
<26> yang-away: Use quotes " " if that is what you want to do.
<25> i have a wrong keyboard set
<7> tty, im a bit lost.. i register a domain from aplus.net but when it asks me to put an ip in to point the address to what should i do as my ip is dynamic?
<26> yang-away: Find it then, type around :)
<24> yang-away: apt-get install apt-file ;apt-file update; apt-file search lspci
<26> !keymap
<27> To change your console keymap, run "dpkg-reconfigure console-data". To change your X keymap, read "man xmodmap" or ask me about "set up x". if you have X check into xkeycaps and xev, or also ask me about drxx
<15> dusty-: how do you plan hosting without a static ip ?
<24> no-ip?
<26> or any other similar service?
<15> dusty-: dynamic dns .. then you dont need a domain
<24> get money and do it right
<7> sigh
<7> right
<28> How is Debian told to create a framebuffer device when it boots up? (/dev/fb0)
Return to
#debian
or
Go to some related
logs:
ubuntu bootfromusb
openvz Error inserting Operation not permitted
eth0 renamed to eth1
setting up Dansguardian edubuntu
GnomePrintCupsPlugin-Message ppd path
ati-itx linux
#ubuntu
ubuntu tcl directory
#centos
nvidia-settings + resolution +amd64 +debian
|
|