| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Comments:
<0> jimmybgood: no manual entry
<1> it errors, saying "command not found"
<2> and reasonable
<1> any ideas?
<3> kibab: dpkg -l | grep ^ii
<4> tarzeau: thanks... will man dpkg
<2> Liable: with respect to ubuntu I never had probs with adding the packages
<5> moshii: thanks, i can't find it even though the generated xorg.conf makes the referall
<6> Yan^: glad you like it.
<0> jimmybgood: though it is shown by man -k xorg.conf
<5> moshii: can you tell me what package it's in?
<7> where did I get nvidia-glx 1.0.8178 for amd64?
<5> I get xorg.conf: nothing appropriate.
<2> liable: thanks, and I think i will return for some more advice, can not beleive that it is all over ;))
<0> jimmybgood: nope, can't find it :/
<5> moshii: yeah, your whatis cache hasn't been updated
<5> several man pages have either been dropped or moved
<8> im having a problem printing using new fonts ive installed, printer program just crashes, any ideas?
<9> If I have a compiled source tree, how do I turn that into a .deb?
<10> can I use asterisk with pretty much any dial up modem?
<11> valdyn thanks aloot it work for me gust fin thanks
<9> webmonkey: Does it crash if you remove the fonts?
<10> I have a dial modem card thingy in my computer
<10> will I be able to use it with Asterisk
<12> since upgrading to xorg 7.0 xbindkeys doesn't work with my mx1000 anymore. I'm using the evdev driver
<6> is it only me, or does xorg7 look for the md5sums in the wrong directory??
<2> liable: btw, what is your version of debian?
<13> moshii: thanks, i got it. here is another question, i have a wireless pcmcia card, cisco aironet pcm352, how can i install the driver? does the kernel come with the driver???
<14> [sed hlp] Is there a way to return the pattern of a string, rather than remove anything but the pattern ( instead of: sed -e file 's/[a-z,A-Z]//d' ). I need to extract an IP from a log containing text, ip, various numbers.
<0> tienchi: google for cisco aironet linux
<15> toxic_: use perl unless it needs to work on a system where perl isn't installed
<13> moshii: ok
<16> hi, im having problems with a dell poweredge 1550 not activating the second nic can someone help kernel detects the card just no traffic lights
<9> Anyone?
<6> Yan^: i have a sarge box and a broken sid box
<0> tienchi: if there isn't a linux driver, there is the ndiswrapper that'll run the windows drivers.. a native driver is better though
<14> zinx, perl if I knew the language. I could technically do it in C/java, but it'd prefer using standard tools for portability
<2> liable: why not try the etch?
<15> toxic_: sed -e 's/^.*[ \t]\([0-9]\{3\}\.[0-9]\{3\}\.[0-9]\{3\}\.[0-9]\{3\}\)[ \t.*$/\1/' will do it, probably.
<14> zinx, Pretty royalish command there. Thanks alot
<6> Yan^: thanks, but I will stick with what I have.
<15> toxic_: blame sed's regex flavor.
<14> zinx, hehe yeah, it's really a powerful tool, but quite cryptic as well
<15> and i forgot a ], and \t needs to be a real tab afaik (don't think sed supports such things)
<17> hi all...
<17> on debian, how do I find out what package a particular file (say /usr/include/elf.h) belongs to ?
<15> spundun: dpkg -S foo
<2> liable: I am asking just in order to understand what are the reasons to prefer sarge, and what are potential probs which I can have with etch
<17> zinx: thankss
<15> spundun: or apt-file update; apt-file search foo, if it's not installed
<17> zinx: oh.. cool
<18> hey
<18> do you know how to use rootstrap ?
<18> it should be able to create rootfs for uml
<18> but i don't really understand how it works
<19> I'm forced to install ftp-server to my debian what of them you guys recommend? :P
<18> pure
<20> have installed a logitec quick cam. habe loaded the modules usb-video, videodev and ibmcam. have set /dev/vidio0 to chmod 666 and have installed xawtv. i`m member of the group video, but when i try xawtv in console, i get: v4l: open /dev/video0: Kein p***endes Gert gefunden, what else is to do?
<21> can you help me with a problem with the latest NVidia drivers in unstable
<21> I installed them but i since i installed them i can`t use my monitor at 1152x864 and 85Hz
<22> hellfire7: yes. just let us clean our crystal ball
<23> !ask
<24> If you have a question, just ask! For Example: "I have a problem with ___; I'm running Debian version ___. when I try to do ___ I get the following output ___. I expected it to do ___." Don't ask if you can ask, or if anyone uses it, or pick one person to ask (ask the whole channel!). We're all volunteers; make it easy for us to help you. If you don't get an answer, ask later or ask debian-user@lists.debian.org
<25> colde89: is this one of the 'philps' based logitechs?
<25> colde89: is this one of the 'philips' based logitechs?
<21> FX5200 and i haven`t had simular problems before
<20> robin_sz: don`t now
<26> is the .forward file (with |/usr/bin/procmail inside) still necesary to use procmail/fetchmail/mutt ?
<21> I can use it only at 75HZ
<21> And the part of xorg.conf about my monitor is the same as before
<21> if i change "nvidia" in the driver section to "nv" i don`t have problems and can use my monitor at 1152x864 and 85Hz
<27> hellfire7: if you hand edit that file, dpkg-reconfigure xserver-xorg won't work anymore.
<28> /j #igor
<21> anythink i should do?
<21> Will a backup of xorg.conf do the job
<25> colde89: colde89: support for the philips based ones was removed from the kernel due to excessive zealotry .. try http://www.smcc.demon.nl/webcam/ for a full explanation
<21> i mean restore the backup and then reconfigure
<27> hellfire7: otoh, you may not have a choice if dpkg-reconfigure xserver-xorg doesn't give you the combination you want.
<29> Hi, i need help with this: checking for Tcl library... found /usr/lib/libtcl8.3.so.1 ; checking for Tcl header... {not found} ; Tcl cannot be found on this system.; this is for eggdrop
<27> hellfire7: do what job?
<5> hellfire7: you can always delete (or rename) xorg.conf and reconfigure
<28> j /#igor
<27> hellfire7: yeah, try that.
<21> i`ll try it
<20> robin_sz: thanks..
<8> how the f... do u make templates or edit them in Kword, its a nightmare to use :-/
<22> thingfish: note that dpkg-reconfigure xserver-xorg does work in spite of manual xorg.conf edition (as opposed to xserver-xfree86)
<8> totally retwarded = kword
<8> *retarded
<29> can someone help me with eggdrop and debian.. need tcl thing..
<27> chealer: wow, I did not know that.
<22> webmonkey: please submit your unsolicited opinions about software to your blog
<27> chealer: thanks for the correction.
<5> chealer: didn't work when I tried it
<22> thingfish: no problem...I had to learn it from Mr. X himself!
<0> crov: install the *-dev package
<27> hehe
<29> moshii Package tcl-dev has no available version, but exists in the database.
<30> can i get to lilo.conf by booting with Debian From Scratch-cd?
<31> how can i shutdown in my terminal?
<22> webmonkey: ask #debian-kde
<0> crov: apt-cache search tcl dev
<0> Petrov: halt
<6> Petrov: shutdown -h now or halt
<31> moshii, thx
<32> kill -11 1
<32> :D
<32> (not recommended)
<8> ok
<33> Hi guys. how can I detach a launched process from its father ?
<30> dammit! cant boot with the new or with the old kernel -_-
<30> how can i run a "rescue" ?
<32> SatanGolga: What happens instead of a successful boot?
<29> moshii tcl8.3-dev: Depends: libc6-dev but it is not going to be installed E: Broken packages
<30> Kernel panic
<25> SatanGolga: boot from CD, type "linux rescue" at the boot prompt
<34> zergouille, foo & disown
<30> like debian-bin-1-cd?
<0> crov: well, find out what lib6c-dev won't install .. I suggest using aptitude
<32> SatanGolga: okay, what did it say caused the panic?
<0> crov: s/what/why
<29> moshii i have only command prompt, and need that tcl for eggdrop...
<30> couldnt find root= or something
<33> Eulex, but I have the foo process launched, already
<30> happened after reboot after installing new kernel
<32> SatanGolga: That's not really what it said. You're going to have to come back with what it actually said; write it down if you have to
<30> hehe, yes i know, cant remeber, was like 3 hours ago
<30> but now i'm rescuing
<30> Stevie: thx, i'll be back with exact info if it goes to hell
<32> ok
<35> does the user used to run apache (user:www-apache) need a shell? If not why is he given one by default (/bin/sh)
<36> hey
<35> charolastra, hey
<37> !greet charolastra
<24> Nihao, charolastra
<36> does anyone know how X.org determines if a modline is "valid"? because my new Xorg install doesn't want to swallow the modlines i used with the old X
<36> ;)
<37> charolastra: Check http://x.org or /join #xorg
<37> charolastra: What version of debian are you using?
<32> why do we even need modelines anymore
<34> charolastra, you may need to adjust your vertical and horizontal refresh rates
<36> #xorg looks very dead (noone talking since 2 hours); and i'm using sid
<37> !tell charolastra about unstable
<34> charolastra, oh, this happened after upgrading to xorg 7.0?
<36> well, i practically copyed all the neccesary stuff from the XG86Config
<36> yeah
<34> charolastra, you upgraded directly from xfree86 to xorg 7.0 and expected the upgrade to go well? also, do you really need those modelines with xorg?
<34> they're made obsolete in some cases by improvements in drivers, iirc
<36> look, everything works great; it's just that X.org doesn't want to take one (my prefered one) modline i used with the old X
<13> hi, can i install libsigc++ from apt-get???
<38> hi, I just upgraded my xorg (from the previous version to the current one) and after fixing a great number of various issues my KDE still has no background, kde control center does not start and konsole displays only white blanks when I type.... anyone knows what I may be missing?
Return to
#debian
or
Go to some related
logs:
#sed
kernel panic -not syncing:fatal exception
You require additional pylons
logitech-applet fedora
mikeman jpg
debian etch xorg fixed font
#perl
Knoppix soft ap
don't have the right GStreamer
uninstall kubuntu
|
|