| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8
Comments:
<0> BlackHand: needs to have nss_ldap rebuilt, as the present one doesn't play well, even with the compat package.
<1> I gave up on 2.3, there were still issues even after update nss_ldap
<2> i am going to try lates
<0> euclid: hmmm, that's ****ty.
<2> i am going to put FDS in my servers, i am tired about openldap issues
<3> BlackHand: what issues?
<2> tkrin: bdb corruption almost all the time, or slapd frozen without reason (i reset slapd and voila, works again)
<1> I had bdb corrupt it self on 2 separate servers today
<1> I was not a happy camper
<3> I was having that issue w/ a client that powers down their server via the power button. somehow ldap does not stop properly during the invoked shutdown sequence.
<3> euclid: damn!
<2> i have to modify the ldap init script, to do ldap recover when the ldap service is started (a la debian)
<1> we had a power outage last night
<1> I think that might have been the undoing of them both, since it outlasted the UPS
<3> BlackHand: maybe I should do that, but I created /etc/acpid/events/power and all is good now.
<2> and maintain via crontab ldif backups and monstruous log transaction files
<3> BlackHand: I do that as well.
<2> the only thing that i need to do well is set acl in FDS to begin the migration in the several boxes at my charge
<3> :)
<4> ok time to boring meeting
<5> when will 5 be ready?
<6> yoyoy: read the topic
<7> hello
<5> sorry
<7> I am trying to perform a remote installation with vnc, but no vnc window pops up, seems like the installer did not find the harddisks
<6> bigpony: yoyoy leech++
<8> you need to finish writing it first donavan
<6> see the value Zathrus ?
<9> pony: I want a leach for dinner
<10> NO pony for orc_orc!!!
<0> pony: what time is it?
<10> Evolution its Hammer Time
<8> what about leeches?
<0> tequila has worms not leeches.
<11> No, mescal has worms
<11> tequila has been distilled an extra time and omits the worm
<7> does the pxeboot image support modules?
<7> seems that I need to load s-ata module
<12> ceegee: yes
<9> wildwrk: you forgot that ATX P/S
<7> wildwrk: is there an overview of loadable modules?
<0> flippo: fair enough...
<13> is there a recommended way to rebuild a kernel on centos? I know it's not recommended, but I can only reproduce a problem with the stock kernel
<9> supa_user: see: http://www.centos.org/irc/ as to kernels
<14> ceegee: which sata controller do you have that CentOS doesn't see it at install time?
<7> cannonball: via vt6420
<14> ceegee: and if you boot that same box with the Knoppix CD, does it also not see it?
<13> it's not really -social material though. I'm not suggesting using a custom one because i can, but because the stock one doesn't work
<0> supa_user: get src.rpm. rpm -ivh src.rpm ; rpmbuild -bp kernel.spec cp config from SOURCES to .config. make menuconfig ; save config back to original location; rpmbuild --clean kernel.spec & rpmbuild -ba kernel.spec
<7> cannonball: remote system, about 500km away from me
<13> thx Evolution
<0> supa_user: that's a general list for how-to. it's not complete, nor 100% accurate, but anyone who SHOULD be messing with the kernel should be able to follow.
<13> right. I'm going to try to drop in the mptfusion drivers from a newer kernel where I think my bug is fixed
<13> since i don't think I have the required skill to backport the specific fix
<6> supa_user: what is your exact problem?
<3> whew, I thought I was the only spoon feeder here. :o
<0> orc_orc: hehehehehe
<7> what port does the vnc server try to connect to my viewer?
<7> 5500 or 5800?
<15> 5900
<7> oh okay
<7> i forwarded 5500
<15> or 5901 or on a linux server
<13> donavan: pretty much the same that this guy is getting: http://www.acc.umu.se/~maswan/ubuntu/ravel-hoary-fswrite.dmesg
<13> but I've booted knoppix and another rescue disk using a newer mptfusion driver and can't reproduce it
<3> ceegee: you're server is connecting to viewer or viewer is connecting to server? this is just a smidge off topic though. ;)
<7> tkrin: server to viewer
<3> ceegee: then port forward 5500
<7> tkrin: is there a list of modules that I can load with append insmod=?
<7> tkrin: and what is the difference between vmlinuz and vmlinuz586?
<13> donavan: hoary is 2.6.10, i was hoping to hackport drivers from 2.6.15 or so
<9> ceegee: to answer your question (since you refuse to do minimal research) we need: uname -a please
<7> orc_orc: actually there is running a debian sarge
<9> ceegee: sux2be u then
<7> lets do it tomorrow, I will go to bed now
<3> ceegee: centos != debian. ;) wrong channel.
<7> tkrin: yes I now that centos != debian
<7> tkrin: but I am trying to install centos over vnc with pxeboot images
<9> ceegee: then read the f*kkin doco and stop talking about it http://www.centos.org/docs has a whole writeup on installation
<16> hmm, was the removal of the CentOS-fasttrack.repo file delibrate from the http://mirror.centos.org/centos/4/fasttrack/ location?
<6> seanos: perhaps an oversight -- use this path to grab it http://mirror.centos.org/centos/4.3/fasttrack/
<13> the update packages for rhel are rolled into centos, right?
<17> how come centOS comes with apache 2.0.52 and not 2.1 or 2.2 ?
<6> because centos is a stable enterprise cl*** OS
<3> flippyhead: have you visited www.centos.org ?
<6> to buggy bleedy edge packages are to be had in other distros
<6> s/to/those/
<16> donavan: ah I got the repo file ok off another server, was just pointing/enquiring as to the status of the file
<16> cheers though
<17> is it possible to have yum upgrade to 2.1 or 2.2 or do I have to install from source if I need a more recent version of httpd ?
<6> thx for pointing it out seanos
<6> flippyhead: no to yum, you get to keep the broken parts if you download/compile something else
<17> nuts. so in this case do you recommend I uninstall by yum first, then install from source? what a h***le
<18> I'm getting this error, libstdc++.so.6: cannot handle TLS data - any ideas on how to fix it?
<13> flippyhead: sounds like you need a different os for that application
<0> omercnet: what is uname -a
<18> 2.6.9
<0> omercnet: what is uname -a
<18> uname -a
<18> Linux alpha 2.6.9-22.ELsmp #1 SMP Sat Oct 8 19:11:43 CDT 2005 i686 i686 i386 GNU/Linux
<19> esi over
<19> oops wrong channel
<13> you can't name an i386 alpha :)
<0> omercnet: for starters, you're a bit behind on updates. also, TLS support is in the Centos glibc by default.
<18> I did yum update last night
<0> omercnet: either you're doing this in xen, or some other vps
<18> any other thing I need to run to make sure I'm updated
<18> ?
<0> omercnet: did you reboot afterwards?
<0> because that's about 6 kernel revisions out of date.
<17> a different OS entirely just to install apache 2.1 ? hmmmm
<18> hmm
<0> flippyhead: centos is about stablity. moving to apache 2.1 or 2.2 is something that won't happen in centos4.
<0> nor will such things be supported in here.
<9> flippyhead: you will be happier with another distribution -- please do not torment yourself
<0> you're welcome to do it, but you'd better be smart enough to do it yourself, without ***istance from this channel.
<17> yessir!
<17> thanks for the help.
<0> orc_orc: do you have my order for server cds printed yet?
<0> it was $80,000 we agreed on?
<9> Evolution: I have the gnmoes working on it in the dungeon, right now
Return to
#centos
or
Go to some related
logs:
geist osdev
up2date stdout hang
cpufreq: change failed with new_state 1 and result 0
#fluxbox
#linux
Moromite
# mount -n -o remount,rw / damn small linux
what is rmnologin
#math
kde seemonkey
|
|