| |
| |
| |
|
Comments:
<0> hello, how would i format my reverse dns config for a 172.16.0.0/20 subnet
<0> anone? would it be 16.172.in-addr.arpa and hosts would be formated 0.10 IN PTR host.domain.com. for 172.16.0.10?
<1> no
<1> the complete record is 10.0.16.172.in-addr.arpa.
<1> i.e. when your zone is `16.172.in-addr.arpa.' your record should be `10.0 PTR host.domain.com.'
<0> thanks Wulf4
<2> how can i redit my records file so if i type in mydomain.com it comes up http://www.mydomain.com not http://mydomain.com ?
<3> that's done on the webserver, not in dns
<2> well i just redid my dns record file and before it did that, then now its not so i figured it was related to my records file
<3> what did you change?
<2> i did an error check for my DNS from a website and so i changed it according to an example i found on google, b***icaly just changed 2 A enteries
<3> which two, from what to what?
<2> ill make a pastebin
<2> http://mrsako.pastebin.ca/100314
<2> actualy where it says www on the second part
<2> it has www.gofastgaming.com.
<2> i tried changing it back but it didnt fix it
<3> what is the ip of your web server?
<3> 44 or 45?
<2> it has two IPs
<2> 44
<2> but you could use either one and get to the same place
<3> ok
<3> you should remove the CNAMe
<2> alright
<3> but what did you change in the zone?
<4> http://rimuhosting.com/support/bindviawebmin.jsp if you scroll down to thebig part of that page b***icaly i used that for a template and replaced the appropiate with my IPs and domain name
<4> minus the mysql.mydomain.com
<3> ok
<2> when i chane the record and apply it, ill proibally have to wait some time ot see if it works becasue it gets cached right?
<3> you should reduce the TTL until you have everything set up correctly
<2> is there a way to force to check for the DNS record instead of using its cach? i reduced the TTL but i guess it wont do anything untl the old TTL dies out
<3> no
<3> but you won't be affected by the TTL if you query the name server directly, of course
<2> what do yuo mean by query the name of the server directly?
<3> the caching will only be a problem on other name servers, not yours
<2> oh ok
<4> can someone please tell me if you think i did this record right? http://mrsako.pastebin.ca/100340
<3> FQDNs must be terminated with a .
<3> don't use ip addresses as nameservers
<4> hmmmmm, could you just reply to that paste and put how the right way is?
<3> what is vps?
<3> mrsako?
<4> i dont know, this is on a VPS im renting. and the record was prewrittin sort of, but a website said my record had erroes and warnings so im trying to fix it
<4> i see vps.gofastgaming.com in othe parts of things on the server im not exactly sure why its pre writtin in some places but i think they somehow come togethor for something
<3> http://mrsako.pastebin.ca/100343
<4> thank you very much Worth
<3> no problem
<4> only problem i have now is "There was a problem while talking with the mail server. Got 'Connect Exception: Connection refused'" but i guess this isn't related to my DNS record file right
<3> no, that's your mailserver
<4> alright thanks again
<4> im also hosting another website on the same server, its domain goes to ns1 and ns2.gofastgaming.com but its called twisttheknifeband.com should i just change everything that says gofastgaming.com to twisthteknifeband.coom except for ns1 ns2 and vps?
<3> basically
<3> paste the file to me just to be sure
<4> Worth: http://mrsako.pastebin.ca/100350
<4> twisttheknifeband doesnt have a mail server
<4> is it possible to use my second IP as a backup mail server also
<4> (for my gofastgaming.com records file)
<3> delete lines 10, 11, 12 and add the real host entries for twisttheknifeband.com
<3> backup mail server?
<4> like you know how ns2 is there incase ns1 is down or something and it also reduces the load off it, is it possible ot apply that same sort of thnig for mail.gofastgaming.com
<3> yes, but it won't matter at all as long as they're on the same machine
<4> what do you mean about delete lines 10 11 and 12, twisttheknifeband.com is hosted at the asme place just have apache virtula name servers
<3> you can't define an address for ns1.gofastgaming.com in the twisttheknifeband.com zone
<4> so what am i supposed to do?
<3> delete them
<3> and put in the hosts you want to define for twisttheknifeband.com
<4> im confused?
<3> ok ...
<3> you set uo a zone for gofastgaming.com
<4> yes
<3> that zone will hold info about that specific domain
<4> then a seperate zone for twisttheknfieband.com
<4> yes
<3> www.gofastgaming.com will be defined in there
<3> etc
<4> yes
<3> then you set up a zone for twisttheknfieband.com
<3> guess what will go in that zone
<4> stuff about twisttheknifeband.com
<3> you guessed it -- info about twisttheknifeband.com
<3> not info about gofastgaming.com
<4> but twisttheknifeband.com goes to ns1.gofastgaming.com and ns2.gofastgaming.com those are its ***igned name servers ar the register
<4> registrar
<3> so if you want www.twisttheknifeband.com to exist, you have to define it in the twisttheknifeband.com zone
<3> yes
<3> that is correct
<3> but you can't define the NAMES and IP ADDRESSES for ns1.gofastgaming.com and ns2.gofastgaming.com in the twisttheknifeband.com zone
<3> that's already done in the gofastgaming.com zone
<4> so i jsut say gofastgaming.com IN NS ns1.gofastgaming.com and thats it
<4> err
<3> yeah
<4> twisttheknifeband.com
<3> but remember to define some hosts
<4> and the address things below it i dont need
<4> oh
<4> so i need more?
<3> well, all hosts you want must be defined
<4> so how do i define it?
<3> http://mrsako.pastebin.ca/100358
<4> oh ok
<4> but i guess i only need the www one
<3> ok
<4> alright i got it thanks
<5> how does one use allow-query with a forward zone?
<6> Why the hell is my slave so bleeding slow to get zone updates?
<6> I change the serial on the master, restart it, the slave gets the notifies... And then just sits on its butt doing nothing whatsoever.
<6> ...A couple of hours later, he's got it, but it's certainly simply too long.
<6> Is there perchance a config option that I missed meaning "just go ahead and sit on your butt doing nothing for bleeding ages while the admins are nearly blowing their hatch"???
<7> hello
<7> is there a way to force specific dns servers to resolv specific dns names ?
<1> add specific records in specific zones to your specific dns servers
<1> horror_vacui: checked your slave's logs?
<8> Wulf4: Yeah, the /var/log/syslog says nothing whatsoever...
<8> It see the notifies, but then the slave just sits there and does, as I said, nothing.
<8> (I had enough of waiting in the maintime, by the way, so to make the slave appreciate the urgency better, I deleted its zone file, and now it updated).
<8> Still, it's somewhat of a tantalising conundrum, why the hell it should behave in such a manner.
<8> Hm... The stupid MS DNS server we use for the internal net is also acting up... I changed 5 zones altogether, and it has recognised it for all but one.
<9> howdy.
<9> i'm using a caching dns server, and i'm wondering if there is a way to set up the logs so it can indicate what was served from cache vs. what was looked up
<9> bind8
<5> i'm not sure, but that may be what the last character is in the querylog? + vs - ?
<5> 'rndc stats' might also provide you the data you're looking for
<9> nope
<9> 26-Jul-2006 14:24:33.986 queries: info: XX+/127.0.0.1/google.com/A/IN
<9> 26-Jul-2006 14:25:04.928 queries: info: XX+/127.0.0.1/googleasdfasdfasdfasdfasfdasfdasdfasdfasdfsaddfads.com/A/IN
<9> i don't have a rndc binary.,... is that a bind9-ism ?
<9> i don't want periodic stats, what i want to know is each time there is a query, did it return NXDOMAIN or an actual results
<9> does that make sense?
<5> ah, bind9 is different
<9> that's why i said bind8 :)
<5> do you want the NXDOMAIN vs found stats or the cached vs non-cached?
<9> both, actually
<5> i don't believe it will report NXDOMAIN on a non-cached
<9> it'd be nice to see for each request one of the following: { cached | forwarded } { OK | NOK }
<5> the + after XX means recursive, there's a space if it's not
<10> does bind provide a way to map an entire domain to another?
<10> looking at DNAME, but that doesn't seem to work
Return to
#bind
or
Go to some related
logs:
gentoo format ext3
disanet7
how to configure vnc-common ubuntu
#perl
smoothscroll joomla
#kde
filelist.org ubuntu
#math
#css
ubuntu asus-wireless
|
|