| |
| |
| |
|
Comments:
<0> moin
<1> hello .. i'm trying to start named and it says 'module capset is not loaded'. 'modprobe capset' says module not found. may i know where to enable capset in the kernel config?
<1> or issit somewhere else
<1> ?
<2> Hey guys I can use my local IP and get responses back just fine but if I go outside of the network and do nslookup IP it connects but when I ask about a domain it gives me DNS request timed out can someone please help!
<3> helo there guys! Do you have a website that describes the different zones and stuff in bind9? e.g., master, slave, etc
<4> Why doesn't BART go to san jose?
<5> Hello
<5> I m searching help about 1 problem
<5> I have 4 DNS server synchronized and I use nsupdate to put it uptodate
<5> so if I add a server with its IP , it works , but not for the reverse?
<5> ok I fond :p
<4> Anyone here like in/near Pleasanton, CA?
<6> hi guys
<6> what is the operational significance of specifying a zone file for a slave?
<0> negativecreep: you can easily change the zone type from slave to master
<6> Wulf4: no ned
<6> Wulf4: its advertised as a slave.
<0> negativecreep: ???
<2> Hey guys I can use my local IP and get responses back just fine but if I go outside of the network and do nslookup IP it connects but when I ask about a domain it gives me DNS request timed out can someone please help!
<6> Wulf4: the slave is supposed to receive the zone from the master...so theoretically it should not need a file statically coded for it.
<0> negativecreep: your master can fail
<0> b00gz1: which server, which request?
<2> Wulf4 I do nslookup, server 192.168.10.12, then ask about ibxsecurity.com it replies back as it should ... Now if I am outside my network I do nslookup, server 64.233.245.124, then ask about ibxsecurity.com it replies with dns request timed out.
<2> Wulf4 Ports are forwarded in my router, it has to be something with my bind9 config :(
<0> your domain has two nameservers which both point to the same IP address
<2> Yeah.
<0> b00gz1: your dns server is not reachable from outside
<0> I can't connect to it.
<2> k 1 second please.
<2> Try now please. I just restarted Bind
<0> no connect possible
<2> I am connecting outside of my network right now
<2> actaully I am connecting by using server buckeyecomputers.com and not ns1. I just relized it fails if you use that
<2> but they should be the same ip :(
<2> They are the same IP is there any reason why it wouldn't respond on one but it would on the other? I mean I figure that request comes as an IP and not with DNS ?
<0> b00gz1: as I told you. I can't connect from outside. this means your router is broken.
<0> or when it's not, the machine you're forwarding to
<0> b00gz1: use tcpdump to debug this problem
<2> I just did connect to it using ns1.buckeyecomputers.com
<0> it won't work.
<2> server ns1.buckeyecomputers.com, Default Server: ns1.buckeyecomputers.com, Address: 64.233.245.124
<2> Wulf4 Can you please try 1 more time for me , I really appreciate your help!
<0> still doesn't work
<2> http://www.dnsreport.com/tools/dnsreport.ch?domain=ibxsecurity.com ... OK I am going to use this to troubleshoot. I just have 1 more question for you, for the NS stuff, DNS is hosted by 1and1.com do I have to have anything in Bind9 about ns1.buckeyecomputers.com ?
<2> And how can I check to see if Bind is listening on the outside interface?
<0> b00gz1: use standard network tools to debug your problems. netstat, tcpdump, dig
<0> b00gz1: it's all you need
<7> b00gz1: either a.) named is not running or b.) you've got a firewall/router blocking queries... also: is that a dynamic IP? host gives "Name: d233-124-245.col.wideopenwest.com"
<2> It is not dynamic ... its Static
<2> I can I check to see if named is running
<2> my firewall should be ok 53 tcp/udp is forwarded to that box
<0> I get a timeout, which means that someone block the packets
<2> Wulf4 I understand what you are saying. Isn't there a way to check to see if Bind9 is responding on the WAN Interface?
<0> b00gz1: tcpdump.
<7> b00gz1, whatru using for a firewall?
<2> pfsense, its very simalar to m0n0wall if you are not fimilar with it.
<2> There is nothing in logs about it
<2> I am not fimilar with tcpdump and its hard to read in a putty window :-P
<2> I turned on logging in the firewall for the DNS rule and it shows it gets the traffic and sends it to the machine.
<7> network gateway set properly?
<2> Yeah I can browse the Internet using Lynx and such.
<7> do the bind logs show a corresponding query?
<2> where is the bind log normally located?
<7> configurable in named.conf. don't know defaiult off-hand. /var/log/bind?
<2> http://www.linuxquestions.org/questions/showthread.php?p=2335306#post2335306 <-- Has my named.conf file on it at the bottom
<2> any ideas?
<7> tcpdump on the dns server will tell you if the query gets to it... and if replies are sent from it... sorry, but RTFM tcpdump
<2> reading about it now :)
Return to
#bind
or
Go to some related
logs:
gaim EOF reading from DNS child
gphoto2 CD33
what does sfsdf mean
MYLUMBERTRADER
#osdev
tuxcard
#ubuntu
#debian
could not connect to video device ubuntu
#fedora
|
|