| |
| |
| |
|
Page: 1 2 3 4 5
Comments:
<0> oyasumi nasai minna-san
<1> anyone here?
<1> whenever i load up my drivers
<1> it always says "mesa indirect" for the GL vendor
<1> i've overwritten every libGL.so.* with the ones provided from ATI
<1> and it still says under fglrxinfo (Mesa)
<1> ah ha
<1> ;D
<1> got it
<2> hey can some one give me a hand with ati ? i just got a x1600 and i cant seem to get drivers loaded
<2> well x11-apps/ati-drivers-extra-8.26.18 to be specific
<3> hello
<4> hi
<4> my dual screen is freezing some time X takes 95% of the ressource for 60-100 sec
<4> every time
<4> (WW) fglrx(0): Failed to open DRM connection
<5> While we were at the DDC, we also ran into the good folks from ATI. A couple of conversations and a test app or two later, we finally isolated the bug that was keeping ATI cards from working well with Cedega in many applications. The issue also appears to exist in DRI drivers for other graphics cards. We have developed a workaround for the bug in Cedega, and the ATI team now has sufficient data for a full fix for the driver problem. Look for more progres
<5> s on this front shortly.
<6> PixieDust_, any news concerning the X200M problem?
<5> no clue :P
<6> Don't care if Cedega works better when I have no video acelleration at all
<6> This problem has been around for a LONG time..still no fix though
<7> hi
<7> error: Failed dependencies:
<7> libexpat.so.1 is needed by fglrx_6_8_0-8.27.10-1.i386
<7> hi capgadget
<7> you use fglrx?
<8> Howdy. New ATI driver + xorg 7.1.1. Got fglrx all working and stuff, but it reverts to Mesa Indirect GLX.
<8> In a section of the log labeled AIGLX
<8> I'm suspecting AIGLX obviously doesn't work. SHouldn't it be disabled by default though?
<9> MAN
<9> how do i get an fglrx module for smp?
<9> ./make_install.sh
<9> - recreating module dependency list
<9> - trying a sample load of the kernel modules
<9> FATAL: Error inserting fglrx (/lib/modules/2.6.17-1.2157_FC5smp/kernel/drivers/char/drm/fglrx.ko): Invalid module format
<9> failed.
<9> COME ON
<8> Heh. THat's an odd error.
<8> Probably unrelated to SMP.
<9> no, i had the same problem with ivtv
<9> until i got an smp one
<9> i compiled module myself, got that error
<9> got a precompiled smp one and it worked
<8> Invalid module format says the .ko file isn't loadable, period.
<8> Regardless of whether it works with smp or not. It's not the right format.
<8> Chances are it's compiled wrong.
<9> so what do i do?
<8> Compile it properly.
<9> wasabi: are you here just to be obnoxious?
<8> No?
<9> i followed the instructions for how to compile it
<8> What did you compile from where?
<9> just like i did before i had an smp machine
<9> /lib/modules/fglrx
<9> in build_mod
<8> It created fglrx.ko right there?
<9> /lib/modules/2.6.17-1.2157_FC5smp/kernel/drivers/char/drm/fglrx.ko
<9> http://pastebin.ca/124692
<10> ./make_install.sh
<10> - recreating module dependency list
<10> - trying a sample load of the kernel modules
<10> FATAL: Error inserting fglrx (/lib/modules/2.6.17-1.2157_FC5smp/kernel/drivers/char/drm/fglrx.ko): Invalid module format
<10> failed.
<10> there we go again
<8> Eh. Well. Got me. I'm running an SMP kernel.
<8> Loads fine here. I compiled it the same.
<11> EdieHow: are the installed kernel headers of the same version as the one currently running?
<10> http://livna.cat.pdx.edu/fedora/5/i386/kmod-fglrx-8.27.10-2.2.6.17_1.2157_FC5.i686.rpm
<10> shoot
<10> no smp one
<10> cheriff: they should be
<10> uname -a
<10> Linux home 2.6.17-1.2157_FC5smp #1 SMP Tue Jul 11 23:24:16 EDT 2006 i686 i686 i386 GNU/Linux
<10> /usr/src/linux is
<10> linux -> kernels/2.6.17-1.2157_FC5-i686/
<10> http://livna.cat.pdx.edu/fedora/5/i386/kmod-fglrx-smp-8.27.10-2.2.6.17_1.2157_FC5.i686.rpm
<10> there we go
<10> how do i figure if i have 8.27 or 8.26?
<10> what is the latest one, i mean
<10> im confused, i can get the whole fglrx rpms from livna?
<10> for the latest one?
<12> Is it just me or does the ATI driver cause peoples systems to crash every couple of days. The screen goes blank (usually completely white) and crashes hard at random.
<12> I posted about this at LinuxQuestions and a few other people said they were having the same problem.
<10> did they ever fix big desktop mode?
<10> to where it actually lets you not maximize across 2 screens when you hit maximize?
<7> hi please help
<7> i have fglrx module loaded and everything
<7> but when i use fglrx driver it says no device found
<7> wasabi: you there?
<7> hi
<7> anyone around?
<7> how do i see if my mythtv works with
<7> err
<7> my ati card works with ati drivers?
<7> ATI Technologies Inc RV370 5B60 [Radeon X300 (PCIE)
<7> 128MB ATI HYPER MEM PCI-E
<7> that's what i have
<13> did you read the release file ?
<13> https://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/linux_8.27.10.html#173867
<7> i cant get the driver working
<13> be more specifics than "it doesnt work"
<7> says no such device
<7> so i have to use radeon driver
<13> no, you have to read
<7> no, YOU have to read
<7> i told you i already searched about this
<7> i used to use the ati driver with another ati card
<7> i set this one up right, followed instructions, and it said no devices found
<7> it says on here it should support it
<7> well, i dont know
<7> because linux guessed it was a x300 series
<7> but i am not sure it is
<7> 128MB ATI HYPER MEM PCI-E is what it is
<13> did you set the PCI id properly?
<7> xorg-x11-drv-fglrx-devel-8.27.10-3.lvn5
<7> kmod-fglrx-smp-8.27.10-2.2.6.17_1.2157_FC5
<7> xorg-x11-drv-fglrx-8.27.10-3.lvn5
<7> 169: 161043 161027 IO-APIC-level HDA Intel, radeon@pci:0000:01:00.0
<7> that means the pci id is 1:00 right?
<7> ...
<7> neo_tg: ?
<7> nexu: ?
<13> did you used aticonfig cmd?
<7> yeah
<7> :(
<14> Hallo. I've just gotten the ATI fglrx driver from the website. I'd like to know if there are any other things I can do to improve my driver / video experience. This is a broad question, I know and appologise. What I mean is, Are there any packages (I use Debian, but it needn't be a package) I can download to improve the quality? I'm using Xorg and my card is a Mobile Radeon 9100 AGP or IGP (it says both.). Thanks.
<14> Such as OpenGL. I just tried to play a video with the gl X11 (OpenGL) driver from MPlayer. It said gl was missing and it would be slow. Can I fix that?
<7> nexu: how do i determine if my card is supported?
<13> Presently42: https://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/linux_8.27.10.html#172394
<13> Presently42: there is no 3d support for your hardware yet
<13> Ediehow: hmm is your pci-e supported working even ?
<7> how do you mean?
<14> nexu: So OpenGL won't work. Yet? Does this mean ATI is working on this problem and will soon mend it?
<7> i can see you now:)
<13> Presently42: you can only hope :-s
<13> Presently42: keep an eye on Release notes of new drivers
<13> Presently42: if they have added support for it, it will be noted in the release notes
<13> Ediehow: i dont have pci-e, i dont know how linux support for it is
<7> nexu: well, i am using the radeon driver w/it now
<13> Ediehow: but with agp system, you need to have agp bus module(or static in kernel) loaded
<7> nexu: i am using it now
<13> radeon driver != fglrx
<7> nexu: err, i know
<7> the point is you asked if my card is working at all
<14> nexu: Hmmm.... Two more questions: 1: Is there any other driver that will give me OpenGL support for my card? 2: Why does is my card listed as both AGP and IGP? Which is it?
<14> And can I change the memory size of my card.?
<13> what distro btw Ediehow ?
<13> Ediehow: yes, the card should work
<7> fc5
Return to
#ati
or
Go to some related
logs:
dev/random uuencode Solaris
nutrient_no
python InteractiveConsole redirect
#kernel
divx/xvid + ubuntu
unmask quake1 gentoo
#math
getting Xterm to line wrap properly
+python +jep +python24
usplash ubuntu-server
|
|