| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Comments:
<0> And I have yet been able to get that damned thing to *stop* taking over the ident... mIRC's works fine
<1> open the code.. find the lines
<2> he's not a coder, i am
<1> looks like you just vollunteered yourself for the job
<2> if that's the problem, i might be able to find the script line that does it
<1> congrads
<1> ;)
<2> i'll look at it tomorrow
<3> Who's machine is 113 forwarded to?
<4> yeah
<0> Both
<0> I have the rules in the router set to forward it to both
<4> syntax overrides xircon's identd
<3> Umm, that won't work.
<1> heh
<3> Can only port forward a port to one IP address.
<2> ok, sulange is using mIRC
<0> Then how come I can do a range of ports with Shareaza/BitTorrent?
<3> Because ranges work differently.
<2> and she's still not idendt'd
<5> asteroid belt BETA! http://194.47.62.78/temp/boss/asteroid_belt.avi
<0> BLAH
<5> feedback please!
<3> Say 6667 will be used by Bittorrent, then Bittorrent on Sulwyns will use 6668
<3> Forward ident to one machine, and just leave ident enabled all the time on that machine.
<3> You will both have the same ident.
<3> But will be "authed"
<0> Hrmmm...
<3> Or run an identd somewhere, and forward 113 to it.
<0> So theoretically I could forward 113 to mine, 114 to hers, and she could have her ident set to listen on 114, either way it would still look like 113 outside the LAN
<0> Yes, no?
<3> No
<3> Auth server (Ident server) will always try to come in on 113
<1> ummm
<3> And again, it's only talking to your outside IP address, has no idea of which internal IP address it's going to.
<0> But the router knows this stuff
<3> If ident was initiated from your computer, and not the server, then it may be possible to split it's route.
<3> No it doesn't.
<3> Server initiated the ident.
<3> You initiated the connection to the server.
<3> irc server sorry.
<3> But then the auth packet on 113 comes from the server.
<3> Turn ident on completely on sulwyns machine and see what happens.
<3> I take it her port forward is probably first in the list.
<0> Nope, my machine has the lower IP
<0> 102 for me, 103 for her
<3> In the list of port forwards though?
<0> But then again this could be mussing up for *me* because of the BNC
<3> Well do you get ident without the bnc?
<0> Allow Ident - Airwolf WAN,* LAN,192.168.0.102 TCP,113 <<<--- That's me
<2> no he doesn't
<0> That's what I was just about to check, but even outside the BNC I think it's not working... never been able to figure it out
<0> It's ircN, I know it is
<3> Trust me, turn on ident full time in sulwyns irc.
<2> how do we turn on identd full time in my irc?
<0> There is no way to turn it on "full time," Drex since the ident server is in mIRC and it keeps being disabled by ircN :P
<3> Make sure, "Enabled only when connecting" is Unticked.
<3> Yes there is, untick that option, ident is on all the time.
<3> I used to get mail server ident requests.
<0> You're still not getting it :P
<3> Man, I've only been doing this for a job for 10 years. LOL
<2> unticked, but ircn will tick it back on
<0> Yeah but are you using ircN yourself? :P
<3> Mine doesn't.
<3> YES!!!!
<0> BLAH
<2> hmm
<3> Since the day I joined #win
<3> Actually, Noahbody put me onto it I believe.
<2> lemme close ircn and open ircn again, see what happens
<2> brb
<3> Oh sorry, you need "Enable Ident server" enabled too.
<2> i did that too
<2> that is the one that keeps getting *unticked*
<3> And if you had of checked "Show ident requests" also, you would see the request from the efnet server br0adband should try and connect to.
<3> Shouldn't uf you have "Enable only when connecting" UNticked.
<3> Whale eye beef hooked.
<2> yes, that's unticked, and it STAYED unticked
<2> but the "enable ident server" won't *stay* unticked
<2> i mean, TICKED
<2> it becoms unticked after i open ircn
<3> Hmmm
<2> and connect
<3> I'll try in a sec
<6> homey home
<2> but bb's identd is working
<2> so maybe now mine will work
<3> You're welcome. haha. ;)
<2> lemme try now?
<3> Yousrs is working sulwyn
<2> oh really?
<3> Oh no it wasn't sorry.
<2> yeah, it wasn't
<3> Someone else snuck in before the bots +v'ed you.
<2> ok, bb's identd works, but mine doesn't
<3> You didn't disconnect
<2> yes, i did
<2> i quit and closed ircn
<3> Not as far as the server was concerned.
<2> oh
<3> You on a bnc too?
<2> no
<3> Hmmm.. Try disconneting again.
<2> so why didn't nac.net know i was offline?
<2> ok
<3> That's better
<1> hehe
<2> argh
<3> Hmm.. No idea. Seein' as yours seems to be the one issuing the ident
<0> AHA
<0> Now to test outside the BNC
<2> you're working, mine's not working, bb
<5> anyon seen the movie yet? :D
<0> Newp... doesn't work outside of the BNC... dammit
<2> well, i can be glad it's not just me, then
<2> snarky response :P
<0> And I redid the rule to specifically send port 113 traffic to *just my IP*
<2> you do realize that this is a puter support channel, nights?
<5> yes
<5> its perfect
<5> (*cough* to launch my new virus *cough*)
<4> night all
<2> ni ni, Ani
<3> LOL... TRhere seems to be an issue with the "Enable Ident server" button reporting it's configuration properly. LOL
<0> No, you don't say
<2> yah!
<0> </sarcasm>
<1> took ya that long huh
<3> sulwyn.. Go check on "Enable ident server" again, after disconnecting.
<1> ;)
<2> then what?
<3> Ahh go **** yaselves
<0> HAHAHA
<3> Ask bb sulwyn
<2> i'm being nice! ignore the mean guys, Drex :)
<2> 04:14:14 Mountain time
<2> great timing to be nice now, yes :D
<2> lalalala
<7> somehow my browser gt changed to the AOL thing as default and I want to set it back to fire fox how do I do that
<8> sorry I got disconnected
<0> Wow... you can create custom VMWare VMDK files these days... too cool
<8> anybody
<8> can anybody help me
<1> tools/options general
<1> check the box .. enjoy
<1> or even hit the button "check now"
<8> tyvm
<1> np
Return to
#winxp
or
Go to some related
logs:
ie7 trusted certificates
#firebird
#beginner
#nhl
loadClip+currentframe
#windowsxp
#winvista
scgirl41
#beginner
#hardware
|
|