| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11
Comments:
<0> maybe with xorg -configure? ;)
<1> I am experimenting now with xorg -configure xorg.conf.test
<0> yeah, then it's normal that you see grey lines
<0> that is how x looks without any app loaded
<1> ok
<1> nobody in #freebsdhelp could tell me that
<0> if you want to see more, start it with "startx"
<1> now I have Gnome linked with startx
<0> this should launch x and a basic console
<0> ah,k
<0> then startx will launch x and gnome of course ;)
<1> the second part of my problem is this
<1> gnome is only running 640 x 480 mode
<0> hm, try lowering the colors... in xorg.conf set it to use 16bit instead of 24bit colors
<0> oh, and make sure you uncommented your monitors settings
<1> now this might interest you. I have no xorg.conf in /etc/X11
<1> Should I make one?
<0> you have to copy it there... ok, step by step:
<1> nah its ok
<1> I got the handbook here
<1> i will cp it
<1> just wanted to know about the noise issue
<1> thanks
<0> hm, i think you still have need for some step by step help... even with the handbook ;)
<0> copy the xorg.conf to etc/X11
<0> and then run xorgcfg -textmode
<0> set your display and keyboard settings there
<0> after you did that and saved the new xorg.conf file, open it in vi and look through it
<0> there should be a place where the monitor settings (refresh rate and so on) i written... these lines are normally commented though
<0> only after you uncomment them it will work fully (including resolutions above 800x600)
<1> xorgcfg -textmode is nice
<2> i can't install adobe premiere pro 2.0 because my CPU does not have SSE2 instructions. any way to byp*** this nonsense?
<1> It is asking me for a vertical sync range, can I use the one found in Windows, and if so where to find it?
<0> digitalRe, read in the adobe support forum
<0> afaik, there is no way to run adobe premiere 2.0 without sse2 though
<0> time to upgrade your cpu i would say ;)
<2> what a stupid decision made by adobe
<2> a simple if..else.. would have fixed it
<0> Cpt|Kirk, for vertical syncrate use whatever you like and your monitor supports... in windows you find that one easily if you go to display properties -> advanced -> advanced -> monitor
<2> i have athlon 3200+, 2GB of ram. I see no reason to upgrade
<3> Live from turkey NOW: http://hyades.uio.no/tyrkia1.html
<0> hm, you sound like you have no clue about cpu architectures or programming at all, digitalRe... you shouldn't talk about things you don't understand
<3> Solar Eclipse
<2> Ta1oN sounds like you're talking about of your ***. it's perfectly possible to write a program that will use those instructions if they are present, and if not it will do without htem
<0> hm... right...
<4> if i add a piece of ram to a computer and after i add it, the computer starts to freeze all the time, so i move the ram and it still happens... what could be this problem
<0> you move the ram to where?
<4> i completly took it out
<4> because freeze only started after i put the new ram in
<0> maybe you damaged something while putting the ram in?
<4> that sounds silly
<0> why?
<4> i just added the ram, i didnt play soccer with the pc
<0> a small scratch on the mainboard is enough
<4> there was no scratchings of the board
<0> whatever... if the pc freezes completely, it is a hardware problem... cpu, mainboard, vga come to mind
<0> if you tested ram already of course
<0> i love it when people can't take the answer to their question
<0> candidate no.1 can't accept that his cpu is crap nowadays, and candidate no.2 can't accept that he probably damaged his pc... but the evil guy is always the one trying to help -.-
<1> hmm Ta1oN - I cant see vertical syncing info in display - advanced - advanced - monitor, just the hertz
<0> that is the vertical syncronization rate
<0> the hertz you see there is the vertical sync you are using in windows
<0> if you have a relativly decent monitor, this should be 85hz or higher
<0> or 60hz in case of lcd
<1> so vertical sync range for 60hz is 50 - 70
<0> yeah, for example
<0> and horizontal sync rate is best looked up in your monitors manual, or the sticker on the backside of your monitor
<0> windows itself autodetects horizontal sync rates via pnp... and i have no clue at the moment where you could read that out
<1> ok
<5> sup Ta1oN
<1> In xorgcfg -textmode does it do ATI Radeon?
<0> there sure is a way... it should be inside hklm\hardware\... but no clue where
<0> hi blackdevl
<0> hm, afaik ati cards are a problem in *nix environments
<1> ok
<0> their drivers are crap or even worse
<1> Do you think Nvidia is better than ATI?
<0> bd is more of a *nix expert than me though... maybe he can help you there
<0> for *nix systems, yeah, i think nvidia is better than ati
<0> for windows systems, i really don't care
<1> ok
<0> i'm not that much of a gamer, and both companies make good cards
<6> Can someone help me with flash8? I have popup windows on this template where u click link on page and small popup box will pop up....well a few minutes ago I must have did something, now when i view the video/flash and i click the link for the popup the popup only pops up for 1sec, then it is transparent and cannot see the txt, and u only see the scroll box, how can I fix this or what did I do?
<0> hm, i have no clue about flash, sry... but did you try it already in #flash ?
<6> yeah
<6> noone answering
<0> :(
<0> your chances to get help for flash here are very slim though, sry
<1> Ta1oN - would you know the shortcut keys in Gnome for accessing the start menus?
<0> nope... i never use gnome
<1> ok
<0> i'm more the kde-guy...
<1> I thought I would learn Gnome on Fbsd and KDE on Linux
<0> i don't use linux at all... i use only windows and fbsd
<0> tried gnome once, and it is nice... especially from a resource-point-of-view
<0> but i'm used to fency guis from windows, so i like kde more
<0> the only thing that is different on *nix of course, is that the gui is a seperate program which uses many resources... while in nt the basic gui is part of the kernel, so maybe it is important to look on resources used by the gui in *nix...
<0> in the end, i think i just don't care :P
<1> What folder is xorgcfg in?
<7> any1 here pls?
<8> Is there a program that can show me what gfx card i got in case i dunno which is it and i need the drivers?
<4> Ta1oN u there?
<4> could it be anything else
<4> i have a computer that i added ram, after the ram was added computer started to freeze on usage, now i took the ram i added out and it still freezez
<9> Awesome.. lol http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=9503239627
<1> Ta1oN - Any idea what settings I need to make for my mouse in xorgcfg -textmode? I have a logitech but that setting, PS/2, and auto do not work.
<10> xorgcfg -textmode? that sounds very *nix-ish
<1> It is, Ta1on seems to know more about it here than there
<10> Ta1on no esta aqui
<0> Cpt|Kirk, did you make sure that you enabled moused on setup?
<0> run sysinstall as root again
<0> make sure you enable the mouse there
<0> it can only work in x if moused is running, and moused i set up by sysinstall (or manually if you prefer) -.-
<0> *is
<0> and wth means "no esta aqui"? O.o
<10> heh
<11> morning all
<11> another glorious ****ing day
<12> stfu
<11> I am feeling pretty zero tolerant today
<13> lord, normal day then? :)
<11> heh
<12> :)
<14> :-]
<15> morning
<15> :D
<0> hi
<12> you scared him away
<1> Darn
<1> Anyone here booting FreeBSD under VMware?
<16> maybe running vmware on windowsxp? :)
<11> Exploit Surfaces for Unpatched IE Flaw
<11> Microsoft acknowledged Friday that an exploit has surfaced in the wild to take advantage of a recently uncovered security vulnerability in Internet Explorer. The flaw puts IE users at risk of code execution simply by visiting a Web site.
<8> what else is new
<16> Big news would be... Microsoft Announced <date> that it has been one month since a new exploit has been found with their <insert name here> product, Microsoft is now striving for 2 months!.
<10> MS strives well
<17> possible to disconnect all mapped drives via command line?
<10> try net use /?
<17> yea didnt see any option to disconnect all
<10> oh
<16> net use * /delete
<16> That should drop all ampped drives
<16> or net use * /delete /yes if you don't wnat to be prompted .. i think.. been a while
<18> heh.. customer is convinced his ex-wife is hacking his computer
<18> and won't listen to any reasoning at all
<18> I kinda wish I was talking to this guy
<19> i got a Tecra M2 Toshiba Laptop and.. well, i get nothing on the screen. no post at all. i can see the power led on but that's it... the CPU fan doesn't seem to spin either... i touched the CPU, it's cold... what could the problem be? a bad m0b0?
<8> probably
Return to
#windowsxp
or
Go to some related
logs:
+delphi 2006+dspack
mysql NOLOCK equivalent
olsentwins efnet
#politics
#hardware
#computers
#cisco
Ya Khayna
adiosk8
#politics
|
|