| |
| |
| |
|
Page: 1 2 3 4 5 6 7
Comments:
<0> why would u think that?
<1> I'd have to change my router to work with static IPs wouldn't I?
<0> no
<1> I should be able to just put in the proper info on the PC causing trouble?
<2> anyone know how to add audio to an mpeg? I converted a ppt file to mpeg now I need to add sound
<0> Tevor, yeah
<1> ok I'll try that just a sec
<1> It didn't work when I first set it up... I'm rebooting it now though to be sure
<1> Still no go... For some reason XP thinks the NIC is only 10 base T, but the NIC and my entire network are 100...
<1> well I gota go... Thanks for the help CaNsA... I'll have to work on this after churh
<2> anyone know how to add audio to an mpeg? I converted a ppt file to mpeg now I need to add sound
<3> goto a sound editor and add it
<2> any suggestions?
<2> guess not
<2> will windows movie maker do it?
<2> this channel is a fountain of information
<3> F him
<4> hi
<4> my windowsxp just stays at the boot screen forever
<4> but I boot in safe mode
<4> what doesn't boot in safe mode that boots on regular? so I can go and test each thing that boots
<5> how long have you waited?
<4> compdoc it never boots
<3> svx pretty much every driver
<3> id take out all the hardware except for your video card
<4> just stays at the bootscreen
<3> and use a ps2 keyboard/mouse and boot regular that way
<4> blackdevl I did that
<5> some driver or software is likely causing it
<3> so where does it start freezing
<4> doesn't work blackdevl
<5> you should remove the hard drive, attach it to a working pc, and run chkdsk d: /r
<4> blackdevl it doesn't freeze. you know what the bootscreen does before xp loads up? it does that forever.
<5> are the mouse and keyboard in the right holes?
<5> Ive seen that cause it
<4> uh yea
<4> where do I see a list of what loads on regular boot but doesn't load in safe mode
<4> so I can get an idea
<5> you boot from the cd, and enter the repair console, which is like dos. type help, and there are commands to view the loading services
<5> you can disable them, or enable them
<4> compdoc can't you do that with safe mode?
<5> no
<4> not even msconfig and run in diagnostics mode?
<5> theres a dos mode in the list when you hit f8 at boot, but unless you install the repair console, you cant access it there
<5> and you likely cant reach dos mode either
<4> so your telling me I need to get my xp cd and go in recovery console
<5> well, thats an option. there are lots of services, and you would have to look them all up to see which might be the problem. Many are MS, and shouldnt be disabled. Its hard work
<5> I think its easier to remove the drive and check for hardware errors
<4> are services like drivers for hardware?
<5> you might want to create a boot cd and test ram too:
<4> remove all drivers?
<5> http://oca.microsoft.com/en/windiag.asp
<4> arhg
<4> I mean
<4> remove all harddrives?
<4> even the one that boots
<5> just the boot drive
<5> run chkdsk on it
<5> make sure youre not battling a hardware problem
<4> ok
<4> hold on
<4> on another topic. I installed xp on this usb hd, something happen on installation but I didn't really care. but anyway now whenever I boot it give me 2 XP choices. even after I took off the usb drive. how does that happen?
<5> put the drive by itself on the secondary controller of a working pc.
<5> power off first, of course
<4> common annoyance?
<5> I think it sees both installs and gives you a choice - usb or hard drive
<4> how does it see both installations?? the usb is unplugged. on the IDE boot drive is connected
<5> when you installed, it adds the choices to boot.ini
<5> just edit it
<4> to the boot.ini of the other xp installation
<5> thats where the choice comes from - boot.ini
<4> and if I just had the USB connected it would also be the usb drivers to ask for choices
<5> I worked on a server a few days ago. a huge Dell Poweredge that boots only from raid, but it wasnt booting. I had to add a drive and install 2000 just to examine the raid drives. it did the same thing
<5> gave me two choices at boot
<5> anyway, a usb drive with windows is a great way to run chkdsk
<4> you said run chkdsk d: /r
<5> but youre right, the choice was added to the new drive, and not to the old boot.ini
<5> yeah, best to run from command line
<5> as long as the other drive actaully is d:
<4> I did start run chkdsk
<4> is that okay?
<4> or I need the d: /r
<5> well, start>run>cmd would have been better
<5> without the drive letter, its going to check the drive its booted from
<4> so start run cmd
<5> yeah
<4> then chkdsk /r
<5> chkdsk D: /r
<5> sheese
<4> it says something
<4> it says force to dismount
<4> y/n
<5> should be fine
<4> type yes?
<5> yes
<4> ok cool
<4> brb for a sec
<6> e
<7> okay Im back
<5> do the ram test too
<5> you have a burner?
<8> yep
<5> you can create a cd or a floppy
<8> I relllly doubt its ram
<8> I have 2 1gb ecc reg
<5> this a server?
<8> na
<8> more like a workstation
<8> dual opteron
<5> what happened? add any new software or drivers?
<5> I bought a logitech gamepad yesterday at circuit city, and loaded the software that came with it. then went to run mirc, and all the files were missing from c:\mirc
<9> guess who is a DCSE now
<9> heh
<3> ?
<10> UGH
<8> sorry about that
<8> my internet got disconnected
<8> I finished the chkdsk
<8> no errors
<11> hi does anyone know any possible reasons my dell laptop could be overheating? i even use a cooling mat
<12> anyone could please help me? I need to transfer 200mb by USB... one computer got WINxp and one WIN98.
<10> HUNGOVER
<3> Lovethis either burn a cd or get a usb memory stick
<4> hey
<3> hi
<4> how can I test if the problem I'm having is because of hardware problem?
<4> like one of my I/O ports got surged or something
<13> svx, what problems are you having. Hoever if it was hardware the machine liekly wouldn't start.
<14> Good afternoon
<15> i think my approach MAY have been wrong . .. i have a maxtor that is clicking and i did a platter transfer to a working drive and now both drives are clicking, :- (
<10> owned
<4> by who?
<4> who owns what?
<4> whats being owned by who?
<10> SHUT UP SVX
<10> i was talking too ari
<10> is it odd to put hot suace on your eggs?
<10> I think its good
<13> hotsuace and vinegar
<10> vinegar?
<13> yea few drops of basalmic.
<16> my msn sounds disapeard :(
<10> kewl
<10> why come here and tell us
<16> fix :)
<16> lol
<13> how much you got?
<16> $2.50
<16> INC GST
<13> sorry my fix is 100 per hour :-)
<16> k
Return to
#windowsxp
or
Go to some related
logs:
#hardware
maxiden medicine
#beginner
#gentoo
hbhlair
#unixhelp
#computers
#windows
#nhl
#computers
|
|