@# Quotes DB     useful, funny, interesting





Google
 
Web www.quotesdb.info
Undernet  |  EFnet  |  Quakenet  |  Freenode  |  Dalnet  |  Ircnet  |  Galaxynet
Page: 1 2 3 4 5 6 7 8 9 10 11



Comments:

<0> so are you booting from another windows installation on another drive? Is that where you can see it?
<1> Yes. I'm booting from a regular IDE drive.
<0> hmm
<1> Into Windows XP.
<1> The IDE drive was cloned over to the S-ATA drive using Partition Magic. It warned the drive might not be bootable, but it said the same thing when I was copying from IDE to IDE...
<0> ahh
<1> So I figured I'd go ahead with the copy anyway. I get the feeling I'm missing something deceptively simple here...
<0> there is your problem most likely, you need to have the driver for your SATA chipset installed, the only way I know to do that would be to do a clean install
<1> You mean the controller? Windows installed it when I booted back in after sticking the drive in the box.
<0> sounds also like the MBR is looking for the IDE drive by default if you cloned it
<1> Or at least, it told me it did. Perhaps it was lying!!
<0> yes, the controller
<1> Ooh.
<1> Hmmm.
<1> This makes my brain hurt.
<0> best bet would be a clean install then copy all your stuff over, might be an easier way, but that is how I would do it



<1> Clean install of WinXP you mean?
<0> yes
<1> Ugh. :P
<1> I don't relish the thought of that at all..
<0> just make sure you have your SATA drivers handy on a disk when you do it
<1> Okay. So I could probably just reinstall
<1> Whoop.
<0> might be your best bet
<1> I could probably just reinstall Windows on the System partition of the S-ATA drive, and just make sure along the way that I have the drivers handy.
<1> So...these drivers would be the ones on the CD that came with my motherboard?
<1> My chipset drivers?
<0> what kind of mobo do you have?
<1> ASUS A8N-E.
<1> Just bought it a couple days ago.
<1> I love it so far. :)
<0> oh ok Nforce 4, good pick
<1> Is it? Well, good to know. :D The guy at the store actually picked it for me.
<0> I dont know a whole lot about that board, but Im going to ***ume that you only have the SATA ports native to the chipset on that board
<1> I hadn't upgraded my system for, oh, 3 years or so. So needless to say I was a bit behind on the hardware side of things...I had no clue.
<1> I would suspect that's the case.
<0> I have an Nforce 4 board as well, but 2 seperate SATA controllers
<1> That's something I'm curious about. Windows wants to install both Parallel and Serial ATA controllers. Why is that?
<0> that is due to the chipset, the Nforce 4 chipset has both
<1> And both need to be installed?
<0> if you ever set up a RAID array, you can also span it across the SATA and IDE ports
<0> they will be installed by default
<0> I can't remember how I did mine, I set it up some time back
<1> Well, I want to run this system just with the S-ATA drive.
<1> I was getting worried that maybe that wasn't possible.
<0> yes, it's possible, just a little more work to get it working
<1> Awesome. :P
<1> Hey, would a Windows repair do the trick, as opposed to a clean install?
<0> possibly, you could try it, but Im not real sure what that would accomplish if anything for your particular situation
<1> Well, if it doesn't, I suppose there's always the alternative.
<1> Thanks very much for your help, k3rnel. :)
<0> no problem, usually Im more perky but its late and Im tired lol
<1> Take care. And get some sleep. :D
<0> thanks :D
<2> hey, one of my laptops that has a wireless card says its connected to the router with a very good signal, but i cant ping anything, not even the router, any sugestions?
<2> err.. wait, i can get the router
<2> but no internet
<2> well, i get like A 80% loss when pinging the router
<3> hi, when I click on a .wmv link, the movie automatically opens in windows media player. when I click a .mpg/.mpeg link, nothing happens.
<3> how do I force IE to open links up in media player? the option "do not play videos in web pages" is checked.
<4> ok my pc is making this weird sound
<4> whiiiiiiir
<3> get a new fan
<4> oh
<4> its the fan
<4> ?
<3> well considering all you said was "my pc is making this weird sound whiiiir" I don't really have much information to properly diagnose your problem.
<3> but considering fans generate practically all the noise you hear from the computer
<3> aside from the hard drive spinning
<5> hello. I had some non-saved document pasted in wordpad and my computer crashed. is there a way to retrieve it? perhaps it's saved in temporary folder or somewhere
<6> windows xp wont let me change irq numbers
<6> and my bios doesn't have much functionality either
<7> XBOX 360 for sale!!!! Xbox 360 Console, Harddrive, Wireless Controller, Headset, Ethernet Connectivity Cable, Component HD AV Cable, Batteries, Power Supply and Cord, Instruction Manuals, *Bonus Media Remote!! This console is Xbox Live Ready! http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=8249456551&rd=1&sspagename=STRK%3AMESE%3AIT&rd=1
<8> hey guys, i'm not too familiar with scsi but a friend is selling one of these cards for cheap (the ebay auction is just for reference). http://cgi.ebay.com.au/ADAPTEC-2100S-2100-S-U160-SCSI-RAID-CONTROLLER-CARD_W0QQitemZ8746442069QQcategoryZ3753QQssPageNameZWDVWQQrdZ1QQcmdZViewItem If i get one of them and buy a scsi harddrive, is that all i need for a fast scsi 15k rpm setup ?
<9> hey guys
<9> can someone please help me?
<9> i am doing a fresh reinstall of windows xp on my system, i have an ASUS A8N-SLI deluxe motherboard. I'm trying to find out what this unknown device is in device manager, it wont go away...and ive tried chipsets and everything....



<10> is there no standard for usb -> ps/2 in dealing with mice? i have a ms mouse that's USB and i can't use my kenginton or my logitech usb -> ps2 converters on it (it doesn't even power on)
<11> anyone ever get those WMV's u can't fast forward?
<12> why is it when i watch videos over the internet my windows media player plays them in black and white?
<13> hey all
<11> sup
<13> hehe hey man
<13> ok well
<13> i have a dvr recorder....that you can login to a web interface..
<11> not many people here right now
<11> ok
<13> it has been given a ip
<13> and i can ping the ip
<13> but when i try use FF or IE ....it fails to load
<11> w/ the DVR
<13> to the web interface ...it just says cant reach it ...
<11> can u see the network settings?
<13> no
<11> so u just have to plug it in and hope it works
<11> that cant be right
<13> well thats all it says
<13> its like a modem router ...once ya connect it ..you should be able to login
<11> how do you know which IP belongs to it?
<13> to the web interface
<13> becuase i only have 3 puters on the network
<11> k
<11> r u sure their are no settings in the DVR
<11> their has to be
<13> there isnt
<13> i have looked
<11> u missed them :P
<13> no man
<13> im sure ..
<11> lol
<13> there isnt
<11> k
<11> and it just says to connect to the IP addy
<11> no ipaddy/home or some ****
<13> nope
<13> just the ip addy
<11> what's ur DVR
<13> dvr hdr04 mp/lan
<11> brand?
<14> is anyone here real good with windows media player?
<11> anyway
<11> i still think you're missing a setting
<13> man
<11> because what if the network doesn't support DHCP
<11> then what?
<13> you know when you log on to a modem router
<11> yes
<13> is that also your gateway
<11> the router would be the gateway yes
<13> your gateway ip
<11> yeh
<13> yep yep
<13> thought so
<11> the router is your gateway IP
<13> just checking
<11> why
<13> yep
<13> just checking
<13> i will show you a tool you get with it ok
<11> lol
<13> can you recieve dcc?
<11> is it an app?
<13> yea
<11> cuz i have like a million installed
<11> dont feel like installing anything
<13> screenshot?
<11> u got the PDF mannual?
<11> sure
<13> ok
<13> one sec
<13> ok man


Name:

Comments:

Please enter the result of the sum 63 + 46 (to avoid spam):






Return to #windowsxp
or
Go to some related logs:

#wtf
#debian
#politics
#ubuntu
#mirc
celedirty
#stocks
loadvar flash6
teafal pots
#dreamweaver



Home  |  disclaimer  |  contact  |  submit quotes