| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
Comments:
<0> bro
<1> 99% of their winblows is pirated
<0> paid $20 for it
<2> and tag the ****
<0> the cock****ers didn't tag it, unbelievable
<1> bro
<1> u from au ? :)
<0> there are 2 out of 100 cables tagged.. i put a head and the test just didn't do anything
<2> IPv***= moron
<0> so i ***umed it was the head.
<1> synaux = cox suxor
<1> tss
<3> jeev; this 100 pairs, isn't it a couple cables of 50 pairs each? they are color coded at both ends.
<1> if fckheads like u were in every chan , mirc wouldnt exist
<0> hmm
<2> weo
<0> peerce, they're all gray :/
<0> the color code, yes..
<2> :/
<0> but apparently, i bought the wrong heads?
<4> ****ing itchy trigger fingers.
<0> heh
<2> :)
<5> didn't Synaux already suggest using a battery and speaker
<3> oh, christ, this place is wired with discrete 4-wire calbes that aren't labeled?
<2> you ***hole!
<3> er, 4-pair ?
<0> ya
<2> :)
<0> that's why i just want to know if i can maybe check with a multimeter, like a color on the copper.. and see if it's receiving anything
<4> absolutely.
<0> to see if even the cable is good..
<2> how you can multimneter the **** with it going to other rooms fool
<6> synaux = fckface
<2> that would be a pain
<3> jeev; i dunno what to even say. sounds like a 100 hour job to me.
<0> i can turn on the tester that powers it at the jack
<2> rofl
<0> and use multimeter on the wire
<2> [23:48] * Joins: _TIHKAL_ (federal@gotit.lockedup.org)
<2> [23:48] <6> synaux = fckface
<2> _TIHKAL_ is federal@gotit.lockedup.org * wiccan
<2> _TIHKAL_ on +#addiction-help
<3> wait, so there's 4-pair wires, they all end up somewhere... oh ****, phone.
<2> federal@gotit.lockedup.org
<4> so he knows you well, eh?
<2> i dont know him
<2> who is that
<0> Synaux, yo uget what i said bro
<0> i have a tester thing where i turn it on and I ***ume it sends some type of signal
<2> are you talking about continuity test?
<0> then at the end where there is no head, i'd like to put the multimeter on the wire and see somthing
<3> jeev; maybe you should read the manual for the tester.
<0> peerce, it's a tester where, one end you plug in, other end you plug in and it turns green
<3> both ends of these cables are unterminated/
<3> ?
<0> one is
<2> jeev there is no EASY WAY
<0> that's where i wanna plug it in
<3> or the 'user' end has wall jacks?
<0> yes peerce.
<0> in the telco room, it's just cut cable
<2> you have to do everyline one at a time
<3> ok, wait. put a rj45 plug in the cabel end of everything at the wire closet end, and get a rj45 patch bay.
<3> don't even sweat whats what until you've done that.
<0> ya
<0> i know
<7> i was bored with photoshop tonight and created this: http://phiz.be/doberGoose.jpg
<2> patch bay would help too
<0> but i'd like to know that... atleast somthing isn't wrong with the cable
<0> before i start crimping all that ****, you know what i mean
<3> then get an ***istant, get two FSR radios ('talkabouts'), and have him go around and jack into each walljack, and you find at the patchbay side.
<0> true
<0> on the back of the patch bay
<0> i plug it in
<2> jeev normall ycable doesnt mysteriously go bad
<0> then another 3 foot patch into the switch?
<3> then label it with permantent tags and jack it into your switch.
<0> Synaux, looks like previous tenants were freaks..
<3> **** patches, put the wires directly into the switches if they are long enough
<0> ya but if it goes into a patch bay
<0> http://www.rackmountsolutions.net/images/300-patch-panel-Enlarged.jpg
<0> in the back of that
<0> right?
<3> each connection is a source of potential problems long run
<3> minimize connections
<3> I'd just put rj45 plugs in the wires and plug the right into the hubs
<0> ya
<2> ive only mess with a patch a few times
<0> but i guess the cat6 plug i bought... aren't compatible
<3> but, seriously, your buddy is leasing a 100 chair office, and he's having you wire his network for free?
<3> what a cheeze.
<0> peerce, i'll get what i want later, believe me
<8> hahahahahahaha
<8> no you won't
<3> uh huh.
<3> the shaft.
<2> your but buddy?
<8> sorry pal
<0> hahah
<0> damnit
<8> you can't come back in after the fact and ask f or money
<0> ok, he's paying me $1200/hr
<2> freind a girl?
<0> are you happy
<0> just so you guys quit it
<0> ;P
<0> best friend's brother
<2> please tell me its a girl
<0> known for 15 years
<8> no dude you're working for nothing
<2> are you a girl?
<3> you getting noogie for this?
<2> are you a girl?
<8> have you ever touched a girl?
<0> haha
<0> yes
<3> you need to get the exact right RJ45 connectors for the wire type. AND the correct crimping tool
<0> ok cool
<0> so peerce
<3> expect a good crimper to be about $100
<0> i shouldn't just get a patch panel, plug em in the back
<0> and just rj45 a 3 foot to the switch?
<3> are the wires long enough to reach the switches ?
<3> 100 switches is a fairly large network hub
<0> ya
<3> what you got? HP stackables? catalysts?
<0> but patch panel would be a cleaner job, no
<3> is it terminated at a rack?
<0> ;DDD ***y unmanaged 24 port netgear's baby!
<3> or just a wall?
<0> ***y ears drilled into a wall
<0> ahha
<3> jeev; eeew. cheap*** ****.
<2> i touch girls through my computer screen, in a way they will never know
<0> ya bro
<9> hahahah
<8> damnit i can't add a host to the bot =(
<0> ok so peerce, just rj45 it?
<3> shoulda at least gotten FSM7232 or whatever
<0> i think i saw that at fry's
<3> how are you going to trunk those? 100 ports into 4 24 port switches?
<0> ok bro
<0> i exaggerated
<0> it's like 20
<0> ;P
Return to
#windows
or
Go to some related
logs:
#flash
#linux-noob
#computers
#beginner
#computers
#delphi
#politics
lp: unable to print file: client-error-not-possible
presario 1277 pcmcia noise
wayen rooney
|
|
