| |
| |
| |
|
Page: 1 2 3
Comments:
<0> you have to create those directories yourself
<0> read /etc/rc.d/rc.sysvinit
<1> could someone help me with a slackware/samba related question ?
<1> i accidently deleted /etc/smb.conf , so i installed a newer version of samba and after i ran the ./configure and makes and it diddnt link back another smb.conf file in etc
<2> if you're running ./configure you're not using the slackware package. so this isn't really a slackware related question.
<2> dig around in the source for the example config.
<1> does it matter if smb.conf is in /etc?
<1> could it be in /usr/src//? and still work ?
<3> yes, it matters.
<3> it has to be wherever samba is looking for it.
<4> http://www.amazon.com/gp/offer-listing/B00093GW3W/ref=olp_tab_new/102-3695356-3187312?ie=UTF8&condition=new
<4> wtf
<5> i purchased a new PC case for $3.45 after $40 rebate
<5> =]
<6> nice
<5> cant go wrong
<7> hi
<7> how do i turn of my screensaver, through the console
<7> :)
<5> im not too sure, friend
<7> heh
<7> had the command this other day
<7> now its gone
<7> damned, this didnt happend before
<7> like my screen is turning black, after 5 minutes or so
<7> ..
<7> okay
<7> now this should work
<7> thanks
<7> (:
<7> (:
<8> morning
<9> I have a eth0 question. How do I put several Ip-number to on eth-interface? Br Dave
<10> Dave_CC: Huh.
<10> Dave_CC: Explain what you want to do.
<11> Dave_CC: i think what you want is IP Aliasing
<9> When ***igning multiple ip-addresses to one eth0 in slackware, should I ***ign different bracket number ifname[1-5], or should I use the same[0] and just diffrent ifname[0]="eth0" -- ifname[0]="eth1"
<9> That would say in rc.inet1.conf
<10> Do you know what eth0 is?
<9> Yes it's my network card and it works. But the hosting company I will send it to will give me several IP-numbers that I would like to use.
<9> So I'm basically trying to use the hosting company's ip-numbers so it will work first time it goes up there
<10> Dave_CC: hm.
<11> what you want is IP Aliasing and you would ***ign them like eth0:0, eth0:1, eth0:2
<10> ARR.
<9> Asmodee`: Can't I just just rc.inet1.conf?
<10> Dave_CC: rc.inet1.conf is for a basic network configuration.
<10> Dave_CC: You can modify it to suit your needs.
<9> gammy: But Could I modify it for my "advanced" needs?
<10> Well it's a bash script.
<10> You can do whatever you want with it :).
<11> after you get the network up you just do ifconfig eth0:0 192.168.1.3
<11> throw that in your rc.inet1*
<9> gammy: of course :) But again, my question was, should I change rc.inet1.conf using ifname[0] all the time and
<9> forget last sentenc
<10> To be honest with you, I don't understand what you're saying. You are not too good at explaining :|.
<10> Dave_CC: It's pretty simple how it works.
<9> yes I know what I'm trying to say is should I go: ifname[0]="eth0" ipaddr[0]="123.123.123"
<11> the rc.inet1.conf iirc ***umes you are not using IP Aliasing
<10> Well,
<10> rc.inet1 ***umes you're not.
<9> or should I just leave the ifname[0] and use ipaddr[1]-ipaddr[5]
<10> thus being what?
<9> Sorry found it!!!! IFNAME[1]=eth0:1?
<10> Yes.
<9> I should have written ifname[1]="eth0:1" for my second IP-number!
<10> Goody good.
<10> So nothing needed to be modified.
<10> Woot.
<10> Too bad bonding required some heavy rewriting :(.
<9> Asmodee`: according to some logs I have read: rc.inet1.conf supports ip aliasing in 10.2
<11> it's possible, newest slackware I have is 10 and that's on my laptop, which is turned off now
<9> Sorry to bother again but now I have followed to spec: and it gives me five: siocsifnetmask: cannot ***ign requested address
<9> But on the other hand it shouldn't since It's not the correct network.
<9> How do I reload any changes in rc.inet1.conf
<9> tired of doing reboot
<3> /etc/rc.d/rc.inet1 restart
<9> I think I have solved the problem: I had ifname[0]="eth0:0", instead of ifname[0]="eth0"
<9> Stupid question: Can I use DHCP_HOSTNAME to with static-ip numbers? So for my second and third Ipnumber the hostname will be dns1 and dns2?
<9> That will say DHCP_HOSTNAME[0]="dns1"
<10> Hrm something very strange is happening here.
<10> mogi: you aroudn?
<10> around?
<12> gammy: don't worry, the aliens always have returned me
<10> Mmmm.
<10> all my terminals have gone insane.
<10> If I open any terminal emulator(aterm,xterm,rxvt,...) it appears that I am losing about half of the keys I enter
<10> Until I run any program and quit it, that is. Then it becomes normal.
<10> Even 'clear' will correct it.
<10> Very odd.
<10> ok, 'clear' doesn't help.
<10> 'top' is enough though
<13> yarr
<6> press 111 for e-hug
<10> mogi: Have you experienced that?
<13> nope
<6> so no one wants a e-hug
<10> :|.
<10> dan_: So 90's.
<13> #2,000 loves e-hugs
<6> as does mIRC
<10> IIIIi i i i i indeed
<10> ARGH
<10> DIE!!!!
<10> Now it's happening to terminals running curses-****e.
<13> gammy: you tried the windows method?
<10> What is that?
<13> hehe
<13> the good old reboot of death
<10> Yeah
<10> I guess, but..
<10> I mean goddamn.
<10> I haven't tried that in years, really.
<10> I need to know what it is.
<10> I wonder if it has anything to do with my ****ing e-mail client.
<10> Seriously. That ****ing joke of a piece of software ruins EVERYTHING.
<13> what do you use for email?
<10> mogi: evolution. We only have MAPI at work.
<14> evolution = pita
<14> takes 4567346525 other packages just to get it running
<13> ah, I gave up on Evolution, I use Thunderbird now
<13> it supports MAPI
<13> although, from what I know, it is rather limited
<13> hmm, I think it might be time to upgrade thunderbird
<13> I'm still on 1.0.6, hehe
<10> mogi: what? really? since when?
<13> dunno
<13> the seamonkey package has it too I guess
<13> I see **** in the changelog just after the thunderbird 0.6 release
<2> nice bugfix in exim.
<2> things like 'EHLOWIBBLE' are valid commands in anything under 4.63 :)
<13> I still don't use spam filters
<13> straight up postifx baby :)
<15> sup guys
<13> poontang
<4> m0o
<4> mogi.. you got a fix for the new spamming ****.
<4> where it is just an image.
<4> instead of text.
<12> I should've bought a slow car :(
<12> damn car is ripping my bank apart
<2> can you not drive slower? or does the car only have fast and stop? :)
<12> i'm dumping money in to making it even faster
<16> do you guys think its likly slack 11 will be released by october?
<13> tntcoda: yes
<4> tntcoda: yes. it will be out soon
Return to
#slackware
or
Go to some related
logs:
Byz do you wanna
#worldcup
#windows
#windows
#goal
#beginner
legit windows xp product key
#nhl
#stocks
#windows
|
|