| |
| |
| |
|
Page: 1 2
Comments:
<0> you sure the server isn't supposed to get an IP by dhcp?
<1> The server is (or will be) the DHCP.
<0> ah
<0> you should be able to get into the gateway somehow and check its configuration
<1> I can get into the router.
<1> I'm talking to you via the same router.
<0> so, are you sure it is setup to allow 192.168.1.5?
<0> er, .5.1
<0> ?
<1> What the server?
<1> I can connect to the router from the server (ping & http)
<0> all that means is the cable between them is okay
<0> it doesn't mean the router isn't refusing to NAT traffic from .5.1
<1> I've changed the IP of the server.
<0> swap it with a known working IP
<0> there are only so many things can be wrong here
<0> either the server isn't sending the traffic or is sending it to the wrong place, or the gateway is dropping it
<0> or there is a problem between the two, but since you can connect to the gw itself, that is not the case
<1> I've rebooted the server and it is now on the Internet. Thank you for your help.
<0> okay
<0> guess something was changed in a file and not for real
<2> new to snort on OpenBSD. Wondering if folks have comments on bleeding 5 day delay Sourcefire VRT vs. Bleeding snort.
<2> ignore that first bleeding :)
<3> hi there i installed ports but doing make install // make clean
<3> i found this error /usr/ports/infrastructure/mk/bsd.port.mk
<3> Error code 1
<0> we need more than that
<0> pastebin the last 40 lines or so
<0> www.pastebin.ca
<3> Missing library for Imlib2.2 and 2 Ltdl fatal error Error code 1 Stop in /usr/ports/x11/fluxbox (line 1497 of /usr/ports/infrastructure/mk/bsd.port.mk)
<0> are your ports and base in sync?
<3> just done an upgrade to 3.9
<0> and are you using 3.9 ports?
<3> installed a ports.tar.gz
<0> from where?
<3> from germany
<3> berlin
<0> where did you get the ports.tar.gz?
<0> what URL?
<4> guess he wants the url
<0> from the 3.9 dir?
<0> the exact URL doesn't matter, just if you installed the ports.tar.gz for 3.9
<3> yes from the 3.9 dir
<0> what does pkg_info|grep imlib show?
<3> how can i view the version of the ports?
<0> you are better using packages
<0> you can see the port version by looking at the Makefil
<0> i think you may need to upgrade your existing packages
<0> set PKG_PATH correctly and then pkg_add -vvvui
<3> make Makefile,v 1.50 2005/09/02
<5> <@NicM> you are better using packages
<3> so thats correct isn't it
<5> giorg: unless you have a reason (and the knowledge) to use ports, use packages
<3> can some one address to me a fast ftp packages link?
<5> giorg: the mirrors are documented; their speed depends in part on your location
<3> ok thanks
<6> I used chp*** to change my shell to bash, but bash does not read my ~/.bashrc file. "source ~/.bashrc" works, but how do i get it to startup with the configurations?
<7> you could source it from ~/.profile
<8> SeLTiC: rename it to .bash_profile
<8> When bash is used as a login shell .bash_profile is read. When it's not .bashrc is read
<6> thanks Kj, it worked
<3> sorry guys i reconfigured my /usr dir from the begginig so if i want to reinstall or pkg_add let's say fluxbox it says already installed
<3> where does pkg read if a program is installed?
<3> under /etc?
<2> var/db/pkg?
<3> ok thanks
<2> I know when you install packages they get listed there but I can't say for syr ethat it is the master list that pkg_add uses
<2> syr? *sure :)
Return to
#openbsd
or
Go to some related
logs:
#debian
ntpd returns a permission denied error!
#stocks
#stocks
#beginner
#freebsd
ceiva-2 hack
#politics
#gentoo
pussy users
|
|