| |
| |
| |
|
Page: 1 2
Comments:
<0> thanks
<0> hmm. i really don't understand why some manufacturers can't be bothered making good datasheets
<0> i can't be the only one who immediately dismiss things where the datasheet is ****
<1> Hi
<1> I have an openbsd box, this box has dhcp client started. I get the IP address, gateway and DNS automaticly from ISP. Sometimes this OpenBSD work one or two days, and I need to reboot the box because I lost the connection with ISP. I don't reach ISP gateway, etc... After reboot everything work great. Any solution ? what need to do to solve this issue ?
<2> maybe you just get disconnectent and ***igned a new ip?
<2> man dhclient?
<3> anyone doing authentication against Active Directory using login_ldap?
<4> hello
<0> yo
<4> need some help. im getting a kernel panic with this message
<4> Panic: kernel diagnostic ***ertion "uvmexp.swpgonly <= uvmexp.swpages"
<4> failed file "/usr/src/sys/uvm/uvm.pdaemon.c", line 581.
<4> what would you think? toasted hardware?
<4> its a 3.8-stable system
<0> hmm
<0> try 3.9 ;-P
<0> i don't know what that means
<0> something to do with swap
<0> are you getting it regularly?
<4> yup
<0> and the box has been running fine for a while before this?
<4> yup, it was running ok
<0> i would suspect hardware then
<0> try memtest86
<4> i will, thank you
<5> hi there i got a big problem
<5> installed openbsd on apowerbook
<5> than done some configuration for the console in openfirmware of powerbook
<5> but now i can't see any console at all
<5> any one can give me some clue
<5> ?
<5> any help
<6> help for what? ( I just joined ;)
<5> i need to restore the openfirmware of my powerbook after having done some modification as is written under the faq3.9
<6> Sorry, I have no expertise with powerbooks
<5> ok
<7> There's a hotkey sequence you can use to restore OF defaults, I believe.
<7> hazz0 : try command-option-shift-p on bootup. That may work...
<5> try after cause i've done some setting as described on the faq for console under openfirmware but from there on i can't see anything just a black console and nothing ekse
<5> cecil what is the pram?
<5> gonna try see you later
<8> cecil thanks very much it worked and now i'm running openbsd
<8> under powerbook
<7> glad to help
<8> 1 question if i'm running out of space the directory /usr and i wanna respace it how can i do that?
<0> it depends
<0> if you have free space after it, then growfs
<0> if you have free space but not after it, try creating a new partition for, eg, /usr/local or /usr/src or whatever
<0> if you have no free space you will have to juggle things around or reinstall
<8> or is it possible to copy that directory to an othere dir and rename it usr?
<0> yes, but do it from single-user mode it is better to use dump/restore
<0> er, "and it is better"
<8> you mean in user mode dump /dev/wd0e /dev/wd0h i.e?
<0> no
<0> i mean read man dump and man restore and google for examples if necessary, think very carefully about what you are doing, do a proper backup if necessary, then try it
<0> you can use cp if you like, but don't forget the -p flag
<0> and be careful about symlinks
<0> read man cp
<0> also, cp will mess up any sparse files, and iirc may have trouble with hardlinks
<8> cecil: did you tried to install hfsplus?
<8> NicM: thanks gonna try i gave /usr 3G but nowdays need more
<0> the easiest thing to do is to make a new partition and put some part of /usr in it
<7> hazz : I no longer have the ac adapter to my powerbook
<7> so it doesn't run anything.
<8> not good
<8> who know the command to run hfsplus?
<4> google, probably
<8> who can suggest me a good virtual machine to run on aopenbsd system?
<0> qemu
<0> or do you mean a JVM?
<8> no JVM
<8> tried that on macosx
<0> eh?
<8> so i'm installing qemu
<9> I have a question that is not obsd related (the problem occurs before it boots), but I am not sure where to ask
<9> I have qla2202 pci card
<9> and when I install it in this particular computer, it hangs with this message "update failed"
<9> before that it prints on the screen something like updating nvram...
<9> I did use ctrl-q to get to the card configuration interface, and I did reset it to default - to no avail
<9> this card works fine in other pcs
<9> any ideas?
<6> In the BIOS, under PCI/PNP settings, enable "reset Extended System Configuration Data (ESCD)" That will force a re-***ignment of IRQ's etc. Then reboot the box
<6> Don't know if it helps in your case, but you could give it a try ;)
<9> I'll try
<9> seems to though that it refers to nvram content in the pci card itself
<9> in the qla2202
<6> i don't know that card. Have you tried the ESCD reset and the reboot?
<9> I can't now - need to wait until last employee leaves
<9> but I will
<9> this card has nvram with memory and risc processor, and during boot if I type ctrl-q, it gives me the interface to the software inside of nvram
<9> it's used for setting settings like loop id and other stuff
<10> hey
<10> I've one precise question about obsd+pf
<10> can anybody from you help me to find solution?
<0> you haven't asked the question yet
<10> ok
<10> i want to throttle bandwith of one iface in one direction
<10> can you point to to files for edit, software to configure?
<10> it is for obsd workstation which is often used for downloading software
<10> only downloading
<6> You can throttle outgoing traffic, not incoming
<10> ok..
<10> similar to htb rules in linux
<0> read the pf guide
<0> and check out /usr/share/pf/faq-example*
<0> most of those examples do queuing
<10> my htb is broken, that is why I was askin'
<10> NicM : thanks
<6> The pf book by Jacek Artymiak also has many examples
<10> thanks again
<6> The title of that book is "Building firewalls with OpenBSD and pf" I have the second edition.
<10> i'll note
<8> anyone had installed a 3d desktop on openbsd?i know it's not the right chan
<2> well
<2> without 3d drivers?
<8> i've seen the glxgears under openbsd and it works
<6> And who needs a desktop anyway ;)
<2> even if you could run it, it would be very slow
<8> thanks guy
Return to
#openbsd
or
Go to some related
logs:
feeling #0000ff
beeing innovative
#qmail
tina fagerstrom
#nintendo
#beginner
#politics
#politics
IP_protoraw
#politics
|
|