| |
| |
| |
|
Page: 1 2
Comments:
<0> anybody running nfe(4) in production?
<1> several variants.. even if you found someone who had tortured it without incident doesn't mean yours is the same
<1> probably legit to consider it in the same family as any of the cheaper adapters
<0> well, I'm interested in running a bunch of Sun X2100's as firewalls
<0> hrmmm...ok
<0> I wish I could find a syskonnect NIC that would work with the X2100's half-height low-profile slot
<1> go set one up and test... even good drivers sometimes experience bad cards..
<0> hunt for the perfect high-powered VLAN router/fw continues
<1> in particular, I had a problematic syskonnect on amd64..
<0> interesting.
<0> there has to be a half-height low-profile card that works well under our favorite OS
<1> intel is pretty small.. do they not have any suitable?
<0> i'll check...
<1> http://ln-s.net/BQp
<0> looks pormising...but no indication of its form factor
<0> err promising
<0> oh, there
<0> in the description
<0> http://ln-s.net/BQr
<0> bingo
<1> ahh, extra bracket
<0> now if i could only find a SATA->CF adapter that didn't need a PCI slot
<0> :)
<1> piece of starstuff too why not
<0> ?
<1> heap of diamonds?
<0> the Addonics adapter looks nice
<0> if i could find some place to wwedge it
<1> horrors, but did you try ebay?
<1> I often find it's good for an at-a-glance of what dongles are available..
<0> true
<0> nothing on ebay.
<1> shucks
<0> this addonics card has some mounting points
<0> i would love to have an X2100 on my desk right now.
<0> but you know what, I'll bet we could fabricate a bracket where the X2100's drive blank is
<1> no room for a right angle riser block I ***ume?
<0> X2100 only has one PCI slot
<0> and i'll need that for the NIC
<1> ahh
<2> it has ide, the cd-rom is connected there
<0> but CDW has X2100's (sans CD-ROM and HDs) for $734
<0> with an opteron!
<0> daniel, I didn't think of that...that might work, too
<0> since this X2100 does not have a CD-ROM drive, there should be an ATA socket that's empty
<2> http://undeadly.org/open.jpg
<0> WORD
<0> sweet. that will work nicely. that's an IDE header there, no?
<2> yes
<0> daniel, have you been happy with your X2100? is it running the amd64 flavor? do you have a recent dmesg?
<2> http://undeadly.org/dmesg.txt
<2> haven't tried nfe0, but it's supposed to work
<2> the raid is useless
<2> otherwise all is fine :)
<0> yeah, we won't need that anyway. we'll go diskless and with two routers at each location, we'll just do CARP
<0> thanks for the info :)
<0> well, s/diskless/CompactFlash/
<0> interesting that you opted for a Broadcom NIC :)
<2> that's the first port on-board
<2> sun opted for that :)
<2> first on-board nic port is bge0, second nfe0, i didn't add a nic.
<3> is there any way on openbsd to scan for devices, cause it took me for ever to find the device name for my seagate external drive
<4> dmesg?
<3> heh
<3> what is the default device name for cdroms?
<4> klepto: cd(4)
<4> apropos(1) or man -k is your friend
<3> thanks
<5> I am having a ton of trouble getting connected to a VPN network, I am using SafeNet SoftRemote in Windows XP attempting to connect to a FreeBSD OpenBSD isakmpd ipsec vpn --- can anyone help?
<6> hey gus
<7> hiya
<8> So if you have altq setup and you do priq on outgoing traffic, how does that behave when you have a rule for incomming traffic that keeps state, say I allow ssh in and I keep state on it, and I have a queue ***igned to outgoing traffic with a local port of 22, does that even match since the traffic is in the state table for the incomming rule ?
<9> are you using the quick keywords?
<8> yes
<9> on the incoming queue, and on the outgoing queue?
<8> no queue incomming, just p***ing it in, but both have quick statements
<8> the incomming doesn't appear before the out statements, however it matches before the out statements, so I'm ***ume I'd have to not keep state on that incomming traf to be effective at queueing this return traffic
<2> no, the state will queue outgoing replies accordingly
<8> thats awsome, if it didn't I'd have to redo a bunch of my config :)
<10> anyone else getting frequent ftp tmeouts on spamd-setup
<11> yes
<10> oh good, im not alone
<11> sup
<10> ay
<10> hey
<11> my wound is healing perfect.
<10> what wound would that be?
<11> my dog bite me last friday.. screwed up my entire weekend being on anti-botics for the next 7 days
<11> lets just say i thought i was faster then chuck norris but seems to me. she is alot quicker then me
<10> heh. damn
<10> what sort of dog is it?
<11> yah that happened at 9am friday
<12> if your dog bit chuck norris your dog would need antibiotics for 7 days :-p
<11> husky/wolf
<10> cool
<12> "my, what big teeth you have grandma"
<11> lol
<10> hehe
<11> yah the messed up part was
<12> is it a true wolf mix?
<11> the night before she killed a shunk the night before in the backyard
<12> beautiful dogs
<11> then my gf walked her an the other dog to the park
<12> but big and still a bit wild
<11> while at the park some mutt was off the leash
<11> had alittle fight.. when i got up .. going to take out the shunk odour.
<11> that is when she launched at me.
<11> yah
<11> im thinking of getting akita also
<11> when i move more up north.
<12> more north?
<11> or a brazilian mastiff
<11> yah
<12> from/to?
<11> im on the outskirts of toronto atm
<11> thinking of moving p*** georgetown
<12> georgetown is north?
<11> yah
<11> atm im on the border of brampton/mississauga
<12> seems more... west to me
<11> haha yah
<11> just further out
<12> right
<12> ok
<12> barre seems like it would be nice :-)
<11> as long as we are on the gotrain line
<12> hehe
<11> haha
<11> i dont wanna be any part of that hwy 400
<11> a buddy of mine just moved up to collingwood
<11> 10mins away from wasaga beach
<11> thats where i was suppose to head for the weekend.
<8> your dog bit you? who does your dog think is the alpha male?
<11> haha yah she is 14 now
<12> what's wrong with 400?
<11> during the winter.. thanks but no thanks
<12> ah
<11> if that greyhound project gets approved. ill think abt it
<12> hehe, i'd imagine
<11> toronto is getting to congested.. an slump for moi
<11> we walked around chinatown yesterday.. oh man
<11> i noticed real estate in oakville is just crazy.
<11> you see that house on the waterfront selling for $37million?
<11> bbiaw
<10> night
<13> can i install OpenBSD with dvd-rw ?
<13> i dont find any image for that dvd **** anyway :(
<2> try linux
<14> helps...
Return to
#openbsd
or
Go to some related
logs:
#gentoo
rpm --import gpg key
#delphi
free beaverbong
#politics
#beginner
#narcotics
#computers
mIRC troubleshoot - channel is temporarily unavailable
Package requirements (dbus-glib-1 >= 0.60) were not met
|
|
