| |
| |
| |
|
Page: 1 2 3 4 5 6 7
Comments:
<0> when the event is triggered
<1> should i have it on set commands aswell?
<1> like setroster
<0> and %flood doesnt exist
<0> probaly not nessecary Enc0re
<0> as they will be op
<0> and its not using any target changes
<0> to do the commands
<0> or any traffic to server
<1> okie
<1> do i have the coding correct for the set commands so only ops can edit the commands
<0> yes if ($nick isop #) would be correct
<1> k
<0> dont forget to have flood protection for your on open event
<1> 1 thing i wanted to do is for the roster i wanna have something similar to this 1.name for bio
<1> at the end when it displays roster
<1> then u can say
<1> .Enc0re
<1> and it will list info about the player like Enc0re Jeff Evans Elizabethtown, Kentucky 0:1:128854
<1> would that be hard to do?
<0> not really
<0> just add them all onto the same variable
<1> wouldnt i have to have like a database where u can do like .newmember encore Jeff Evans Elizabethtown, Kentucky 0:1:128854
<1> or what have you
<0> set %variable $iif(%variable,%variable $+ , $+ $nick,$nick)
<0> something like that
<2> do you store there info anywhere yet Enc0re ?
<1> no
<3> ummm... isn't that one too many ,'s for a $iff?
<3> *$iif
<1> something like n *:TEXT:.roster*:%clanchan: { if (($2) && ($eval($+(%,roster.,$right($1,-1))))) { msg $chan $+ $right($1,-1) $eval($+(%,roster.,$right($1,-1))) } | else { msg $chan msg $chan Roster 1 $+ $replace(%roster,$chr(42), ) }
<1> as for .newmember on *:TEXT:.newmember*:%clanchan: { if ($3) { set $+(%,roster.,$2) $3- } }
<2> lot of variables
<2> heh
<1> but then all of my information i would have to set in my command line as in .newmember Enc0re Jeff Evans Elizabethtown, Kentucky 0:1:128854
<1> and if you .newmember an existing use, it will overwrite them
<4> wow you dont HAVE to print those colours so many times
<1> sorry
<1> :D
<5> erkekmisin yoksa kadnmsn
<5> hiy
<5> slm
<6> memet: Burasi mIRC yardim kanalidir. Eger mIRC ile alakali bir sorunuz varsa Ingilizce olarak kanalda sorunuz, ve birisinin cevap vermesini bekleyiniz. Eger sohbet etmek istiyorsaniz #istanbul #ankara veya #zurna kanallarini deneyiniz yada /list yazarak kanallari listeleyin.
<7> yo
<7> anybody here ? ^
<8> hi
<7> hi
<8> haw are yo
<7> pretty bored...and you ?
<7> Don't have anything to do at work...
<7> -_-
<9> I need help configuring my internet/router , My dcc chat and send dosen't work.
<7> what's your router ?
<9> Its an actiontec.
<9> I forwarded all the DCC ports.
<7> Are you on a campus or something like that ?
<9> No I am at home, I recently got DSL.
<7> Do you have a firewall activated ?
<7> (like, for example, Windows XP FW)
<9> Yes I have sygate personal firewall, but when i turn it off it still dosen't work.
<9> Sygate is setup to allow mirc access to the internet.
<7> Did you try to forward all the ports ? (not only DCC ones)
<9> no.
<9> lemme see if i can dcc chat you.
<7> Then, it might be possible that some ports are missing
<10> have you configured the ports in mIRC itself?
<9> Yes.
<10> which ports did you forward?
<7> I got your DCC
<7> err...
<7> Doesn't seem to work. Though I'm accepting it, it's still waiting
<9> yup.
<9> thats what happens.
<7> As minderase said, which ports did you forward ?
<9> 1024-5000 UDP and TCP
<9> 10057 - 10070 tcp
<9> 113 udp and tcp
<10> is the ip address you provided correct?
<9> yes.
<4> Electrosy send me something
<7> Don't you need also port 59 ?
<4> no
<7> ok, that was fast ^
<4> receiver needs port 59 should the sender decide to use dcc server
<4> thats done if the sender cant accept incoming ports
<9> will try and dcc chat you argv[0]
<4> which is not the case here
<4> go ahead Electrosy
<4> try a file?
<4> seems to work fine
<9> it worked fine?
<9> hmm.
<9> now its working huh?
<4> yep
<4> works
<9> lemme dcc chat you again.
<10> heh
<10> try dcc chatting me :X
<4> its fine
<4> basically if you have problems it would be the other persons fault
<4> cause your configuration works
<10> works over here too
<9> lemme see if my other client works, t
<11> hello
<9> blahblah is my other client.
<7> hi
<12> a
<11> hey minderase.
<11> is my DCC chat working?
<10> nope
<11> nope, its broke on this client.
<10> there seems to be a mismatch in the ip too
<11> hmm.
<13> blahblah it works
<11> interesting.
<11> dosen't seem to work when i dcc chat other people.
<7> retry over here
<11> It dosen't work when i DCC other people.
<7> ok, i DID receive some dcc
<13> blahblah try //say $ip
<11> 67.40.51.67
<7> but that wasn't you >.<
<12> 2 * Thigr 2 * == kool
<11> oh, hmm. thats not the correct ip.
<7> I don't think it's...cool ^^
<6> who let MR USA in
<7> but, whatever
<13> yeah, change lookup method in options/local info
<14> d,jheruiyg5yhgjghrtluy
<11> ok.
<11> there .
<13> try again
<11> thanks guys.
<11> i think i might have it now.
<7> ok, it did work blahblah
<15> hi
<16> something we can help you with?
<17> find klazz percussion
<18> slm
<19> Question
<19> If i have the variables $1 and $2 etc that i have got via tokenize function
<19> Can i access them in a variable way
<19> e.g.
<19> set %number 1;
<19> $%number
<20> var %number = $1
<4> $gettok($1-, %i, 32)
Return to
#mirc
or
Go to some related
logs:
#computers
german team scores 13 goals
#beginner
hack sblogin
#windows
clinton cut military budget
application not found + windows defender
putquick op
#red
nec l4013
|
|