| |
| |
| |
|
Page: 1 2 3 4 5 6
Comments:
<0> :(
<0> what's this.
<1> awol?
<2> monster: did you TRY it yet
<1> i tried /dev/sda2
<1> but it wants (hd*,*) formayt
<1> **** it ill try, hope i dont kill another drive
<2> <2> yes. and when you tried (hd2,2)?
<1> i didnt try, cause i didnt want it to write to the wrong drive
<1> Error 21: Selected disk does not exist
<1> thats odd cause i had 3 disks
<1> hmm
<1> i tried (hd0-2,2)
<1> none exist
<2> cool, you have no hard disks
<1> but i do
<1> =\
<2> you do know ,2 indicates 3rd partiton.
<3> maybe try a grub howto or something
<1> yeah i just tried partion 1
<1> on all 3
<2> meaning ,0
<3> get a howto and stop trying to guess and f your system up
<1> its supose to be 2
<1> dude
<1> from grub commandline i do
<2> 0=1, 1=2, etc etc etc
<1> root (hd1,0)
<1> setup (hd1,0)
<2> second disk, first partition
<1> right
<1> i know it needs to be second partition
<1> so *,1
<1> but still didnt see any drives
<4> i just found these 2 messages in /var/log/auth.log . what do they mean?: http://rafb.net/p/ntqVF363.html
<5> someone as root su'd to nobody
<4> Alien88: user 'nobody' doesn't have a login/shell though, so isn't that impossible?
<2> nothing says it was alogin
<5> could have been a program
<4> ah
<2> su nobody -c "/some/program"
<4> gotcha. thanks
<2> or an sudo, if configured
<4> what's with the "???" in the first message?
<0> you really are my ecstacy
<5> litage_: dunno!
<6> when trying to use my wireless pcmcia card, with iwconfig i get error, device in use, and kwificonfig cant find any networks when scanning, any ideas?
<2> litage_: no terminal
<4> thanks graz
<0> on my debian install
<0> the kernel boots okay
<0> and then
<0> "waiting for root filesystem"
<0> and it hangs.
<6> do you have the file system driver in the kernel?
<0> well.
<0> debian installed okay.
<0> i reboot. and it says waiting for root filesystem. hangs for a little while
<5> is that the exact message?
<0> and then finally boots to a initrdmfs or whatever
<0> then it says "cannot mount /dev/hda1"
<0> but wait.
<0> I dont have an hda1.
<0> its scsi.
<5> then your lilo||grub||fstab is messed up
<0> well
<0> it dropped me to some sort of minimal shell
<0> and the only mountpoint is /dev
<0> its like an initrdmfs shell or whatever.
<0> well grub is fine because it boots the kernel.
<0> I guess the fstab is messed up
<0> and in order to repair it i would have to boot from the debian cd again and check it out
<7> hazta
<8> Anyone ever heard of dm raid1 or evms2 limiting read speed to 80.0 MB/s?
<8> err md raid1 I mean
<9> hey
<9> what a good jump drive distro of linux
<0> ubuntu
<0> knoppix
<2> slackware
<2> fedora
<2> debian
<10> I like Slax.
<11> what in linux can read .chm files?
<10> thats a windows format as far as I know
<10> I always see it referenced as 'windows chm extended'
<10> but I think its just compressed html
<2> hmmm kphone has no ipv6
<2> neither does twinkle
<12> neither do most SIP implementations
<2> why not
<12> why?
<13> why is that I hit it with my left index finger then....
<2> so I dont have to nat?
<14> does asterisk do ipv6?
<12> no
<14> is it in the works or not really
<12> there have been a few futile attempts
<14> i take it it's a really big deal to make it work with it
<15> how long should it take for a dhcp client to get a IP from a dhcpd server ? my localnetwork seems to do it very slowly, any hints on speeding this up, or trouble shooting ?
<12> xnomar: it's kinda a chicken/egg scenario
<12> nothing supports ipv6 - so it's a low priority
<14> i have no clients with ipv6 yet and it's been out for years
<12> exactly
<15> i have absolutly no idea about network trouble shooting ...
<15> apart from ping, haha
<14> i went to a computer swapmeet in irvine today. got me a wrt54gs for 30 bucks and 2 usb cables for a dollar each. you find some kewl stuff there sometimes
<14> i reset the router and flashed with newest firmware and i'm using it right now. :)
<16> I haven't been to a swap meet since like 93
<17> Is there a way to setup multiple vncservers .. so that I can have lets say two different users logged into a single machine via vnc?
<17> When I add multiple entries within /etc/sysconfig/vncservers .. the system always starts up with only one .. the last one in the file.
<17> forget it figured it out
<9> hey what a good linux distro for using with jump drive flash drive usb
<9> I tryed slax
<9> didn't like it
<9> or dam small linux
<18> anyone here using bitchx? how do i turn off message flood protection?
<19> /help
<18> atomic: not terribly useful when the help command gets so long you need a dictionary
<2> /set flood
<2> will show al variables with flood
<18> graz :) thank you, got lost with fprot
<2> and #bitchx does bitchx help
<18> graz: i've been there, it's quiet
<20> so use a client with better support then.... or rtfm instead
<18> awol: A valid reply to almost any question, makes you wonder why channels like #linuxhelp exist, no?
<20> linuxhelp provides help for linux probs... bitchx has it's own support channels
<20> th0rnydev: read the channel guide
<20> !wtf linuxhelp?
<21> Welcome to #linuxhelp ! :) Please read the channel guide at http://awol.no-ip.org/howto-gethelp.html - Don't ask to ask, just ask your questions right away. If you need to paste more than 3 lines, just say .hitme and you will be given a URL via /msg where to paste it for everyone to see. Be patient, answers may take some time.
<18> i don't see anything on that page that excludes bitchx,, it's software that runs on Linux, or do you only deal with the kernel?
<20> no... but bitchx is running perfectly on your system... we're not here to teach you how to use it
<20> th0rnydev: and if all you want to do is argue we're not here for that either
<18> it was misconfigured as far as I'm concerned... and no, I didnt come here to argue, you just seemed upset that I got an answer. I'll leave now, thank you graz
<20> he was misconfigured...
<22> awol: which one of the ops worked at google?
<20> um.... not sure now.... cant remember....
<22> damn
<22> I want in on the google video beta
<22> its making me sad
<22> er
<22> google TV
<23> Is there much diff between a Pentium D 2.8Ghz no HT and a Pentium D 3.4Ghz with HT? Its probably just like a 20% boost in Mhz...which wont amount to more than a 5% net increase in juice, if even that right?
<23> For running a web server...no SQL
<16> I've seen worse performance in HT for non-threaded apps
<16> *shrug*
<23> forget the HT--thats just a distraction and can be disabled in BIOS anyway
<23> what about just the Ghz jump of 20%...thats net 5% overall or worse ya think?
<23> Well if someone were to put a gun to your head and ask you to give your opinion--would you say about 5% or more? Or less?
Return to
#linuxhelp
or
Go to some related
logs:
#microsoft
Sounds for Men commercial
douglas adams Kriket
dell insipron water keyboard
chrontel xorg intel
#beginner
#heroin
#politics
#beginner
the fan starts then stops on my 6800 ultra
|
|