| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12
Comments:
<0> or corsair value
<1> ok
<0> im of the opinion people who have no idea what they are doing dont need to be overclocking
<1> Is 2 * 2*512 a lot less efficient than 1*1024 ?
<2> no
<2> its faster
<3> what kind of cpu do you have?
<1> X2 3800+
<3> I don't beleive you can run 4 sticks of ram at pc3200
<3> with 4 ram sticks in you get pc2700
<0> yeah, you can.
<1> Im only running 2 sticks thought right?
<1> 2* 512*2
<3> so 2x1gb is better than 4x512mb
<0> you can run 4 at 3200
<3> Jingles, no you can't
<0> uh, yes. you can
<3> it exceeds the bandwidth of pc3200
<0> on post venice cpus
<0> you can.
<3> really/!
<0> or rather, venice and up.
<1> I wouldnt be running 4 though right??
<0> which includes any x2
<3> I thought it was a socket limitation
<0> no, its memory controller
<0> trust me im running 4 right now :P
<3> like how you can't do 3 double sided ram modules on a 754
<0> you can do all 4 double sided at 400 on an x2. itll be 2T, but its 2t regardless when you fill 4 slots
<3> yea
<0> and 2t vs 1t is another meaningless debate. woo. that 2% performance hit.
<0> its more than made up for by having the additional ram
<2> uh
<2> its not 2%
<2> you really want 1t
<2> it makes things much faster
<0> actually in everything except artificial memory benches like sandra, it hovers at 2%
<2> 2-2-2-5 timings are the only thing i settle for
<2> and i do it by overclocking
<2> :D
<0> anandtech forums had a rather lengthy thread on it, where tons of people did their own testing at 1 and 2t
<4> http://i34.photobucket.com/albums/d107/bjarki11/othokki/6af03872.gif
<1> Does dual channel ram mean there are 2 separate sticks ?
<0> heres a similar hard forum 1t vs 2t
<0> http://www.hardforum.com/showthread.php?t=917047
<5> windows installed successfully :P
<0> the anandtech thread is gone into the ether. must have vanished in a hd crash or something
<6> yes staz
<6> and they are connected in cooperation sorta..
<1> :( I definitely want 1 * 1024 then
<1> otherwise all my slots will be taken up If I have 2 * 512*2
<0> another article (tech report) with the same conclusion.
<0> http://techreport.com/etc/2005q4/mem-latency/index.x?pg=1
<7> when you crimp a network cable you don't have to expose the 8 wires right? it looks like the pins would cut into the wire, and that should be enough contact? or does it not do that
<0> timings and 1t/2t is nearly meaningless
<5> CPU Info: ( CPU's - AMD Athlon 64 X2 Dual Core Processor 4200+, 2.21 GHz, L1: 64KB L2: 512KB (0% Load))
<5> hmm
<5> have to disable colors
<8> Jingles: nice article!
<1> What do you guys think about this? --> http://www.extremepc.co.nz/product_info.php?cPath=117_118&products_id=1115&osCsid=4728eb3dc43138f704cd3eb815a998f4
<1> Would it be just one stick? :)
<0> for those interested, heres the first page of that anandtech thread from google cache. benchmarks from 2 different people at top and bottom of page.
<0> http://216.239.51.104/search?q=cache:7N7CQ_gEJz0J:forums.anandtech.com/messageview.aspx%3Fcatid%3D28%26threadid%3D1577496%26enterthread%3Dy+1t+and+2t+difference+anandtech+&hl=en&gl=us&ct=clnk&cd=2&client=firefox-a
<0> time for wendys. bbiab
<9> gawd
<9> cant wait until i get my new Lian-Li case tomorrow and get rid of this old shaky case
<10> hey
<10> does anyone have a dual cpu system?
<11> i have a quad cpu machine
<12> hi
<10> spamalope tell me
<10> would you give up one of those cpu's from a blowjob from jalo?
<10> no no would give up 3 of them?
<11> what is a jalo
<10> jenefer lopez
<11> nah
<10> what about beyance?
<11> nah
<11> none of them
<13> jlo
<13> beyonce
<13> CPU Info: ( CPU's - AMD Athlon 64 X2 Dual Core Processor 4200+, 2.21 GHz, L1: 64KB L2: 512KB (0% Load))
<13> Video Card: (nVidia GeForce 7800 GT) Sound Card: (Realtek AC97 Audio)
<14> hey wheres the best place to get a good deal on USB keys?
<15> how to set up 2800 mhz whit this? Ht Frequency ratio x1-x5(hypper bus), cpu clock 200-455 , hammer fid control x5-x12 (multiperler),CPU/DDR clock Ration 2/1-2/2.5 (DDr speed= cpu clock xcpu/ddr ration x2). Ram settings:timing **** , refresh rate 100 mhz-200 mhz. help me plz.
<16> eh
<16> pretty sure u want to focus on the cpu clock
<16> but others probably need to be changed too
<15> jepp
<15> i try 230x4 230x12 and then i get erron when load bios
<17> I got this problem, my installed my new mainboard and CPU, but when i boot it it starts for 1-2 secounds then it shut`s down by it self! Anyone know what this is?
<18> PSU
<17> what?
<18> power supply has a lot of tickets
<17> its my power box?
<18> i don't know
<17> hmm
<18> but it's possible
<15> shut`s donw or stop?
<15> my stop when i clock to mush
<17> shut down
<15> stop in bios why?
<18> check the CPU is a stock speed
<18> like the memories
<17> not in bios
<15> to much over lioke
<15> okie
<17> not that far
<15> i try samme clock
<17> it starts, then stops after 1 - 2 seconds
<15> 230x4,230x12
<15> 2/1 cpU/ddr ratio
<15> thats okie clock?
<17> do i real need, hmmmm, coolpasta ? is thats the name on eng?
<17> to cool it down
<15> 460
<15> damit
<15> ddr speed 460
<15> to much
<15> probbly stop i bios then
<15> omg
<15> noob ram
<16> hey.. if your motherboard's standard is ddr2 667mhz, will it support 553mhz modules and run slower?
<15> CMOS chcksum error whats is this?=
<15> i get this now
<15> memmory?
<16> nm
<16> it will work
<16> dumb question
<15> CMOS chcksum error whats is this?=
<15> memmory faild?
<19> It means that the checksum that's stored in the CMOS didn't match the one calculated from the CMOS.
<15> omg
<19> More often then not, it means the cmos was blanked one way or another. It could be a dead battery, it could be that the cmos clear flag is set, lord knows.
<15> but i set settings
<15> ffs
<15> battery is new
<15> bios over fine when its deflaut
<15> and i can save
<15> i only get that error when i clock 230x4,230x12 2/1
<15> myby i need to put on high preformence ?
<15> enable?
<15> i try
<19> That may mean that you shouldn't use thouse frequency settings :P
<15> top preformave
<15> ffs i can
<15> i will clock me comper to dead if
<15> i can
<15> 2.4 ghz now
<19> Have fun.
<15> you 100 % i cant over clock?
Return to
#hardware
or
Go to some related
logs:
#computers
#nhl
#online
#mirc
partition magic spanned volumes
#solaris
#computers
#sql
HyperWRT screenshot
#beginner
|
|
