| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
Comments:
<0> sorry :)
<0> kbit would be slow :)
<1> should i turn it off and on?
<2> the sisko is necessary.
<1> or would that mess up the install and make me have to partition again?
<0> stainer: in that case you can always swithc off the sector check
<0> then its ready in 1 minute
<1> ok
<0> partitioning is nothing more then putting some bytes in the bootsector and formatting is nothing more than creating a FAT or 2
<1> I get stuck at such a stupid*** part
<1> fudgepacker
<1> Maybe my motherboard fried
<0> stainer: what tool/program/installer is doing the partitioning ?
<0> windows installer ?
<1> yea
<0> I see
<1> I already partitioned it
<0> ok
<1> And it just keeps freezing at various setup points
<0> thats not normal
<0> does the cpu freez up or so ?
<0> I remember 2 days ago your computer didn't want to stay switched on
<0> is it fixed ?
<1> well, it sounds the same as it does when it is normally running when it freezes
<1> can't even tell except for there's nothing changing on the screen
<0> I see. is it your first pc that you self built ?
<0> sometimes its better to buy a pre built one
<0> unless your like me :)
<1> Well, it can't be that bad
<1> the mouse just disappeared or someting
<1> something*
<0> I select the best hardware for the cheapest prices and then buy it all and built the pc
<0> :(
<0> its hard to help from abroad
<0> there's so many things that can happen in a computer
<0> jenns: sorry we're onto hardware topic again :)
<1> it got further this time
<0> cool!
<2> im of the opinion stainer has no idea what hes doing and needs help in person
<1> WHen it messed the first time i just couldn't see the mouse
<1> Well, i have gotten aas far as i need to to know my hardware is pretty much fine
<2> maybe you could get professional help from the best buy geek squad. harrrr
<1> no
<1> i hired some fag for 35 bucks, and he did not know wtf he was doing
<1> he asked me what he wanted me for him to do
<1> I ended up giving him ten bucks\
<1> After looking at the pc for ten minutes he asked what kind of an intel it was
<2> that doesnt mean everyone is a moron
<2> just the people you hire
<2> (and you)
<2> :D
<1> It ****s that i have these gay, weird problems.
<1> Perhaps they will go away once i install the chipset
<1> and everything else
<3> problems never go away
<3> they just replace each other or take a nap for a while
<2> bed time :D
<4> :o
<1> well, windows installed
<1> Hey guys, should i install the nvidia chipset drivers that came on my cd?
<1> Isn't that the same as the video card drivers?
<2> no.
<1> why is nvidia stamped on it?
<1> So, wait. What is the answer to my first question?
<2> im ***uming you have an nforce 4 motherboard?
<1> yea
<5> there any risk with water cooling?
<2> so get the nforce drivers from nvidias site. anything you get off a pack in cd will lag behind in terms of release
<2> in other words they will be old
<0> well once you think you got rid of the noise of the fans you get a noisy water-pump back :)
<0> a huge external thing that the cooling liquid resides in
<0> like a fish water pump :)
<2> stainer: youll need the nvidia video card drivers as well if you have an nvidia video card
<5> cooling liquid? it's not water?
<0> yeah its water with some stuff
<0> anticorrosion
<3> the hopes of today are the failures of tomorrow
<0> LOL
<0> right :)
<1> ok
<1> thnx
<1> i think it is working well
<3> and the successes of today are the disasters of tomorrow
<1> do i need any other drivers if i am hooking the pc up to my hdtv?
<6> is using a pci ethernet card going to have any possible performance gain over an onboard?
<0> the successes of today are the disasters of days before today !
<6> the onboard is IC+, and my pci card is intel 1000 gt
<3> b***goon no.
<3> b***goon just speeds, go figure what speed is each and pick the faster
<0> once the stuff is in the shops its outdated for a month or 3 allready again
<6> well the pci card is 1000mbps
<6> might be nice some day
<0> technics are always ahead of the sales :)
<3> though if the other end is 1gbps too so it might be nice.
<6> yea
<3> else itll be useless ;=)
<3> if the speeds are equal, it wouldnt matter onboard or not
<6> yeah...
<6> I think getting things back off the motherboard can ease a little off the cpu...
<3> btw if you see speeds ****, eventhough both ends are as fast, get a better cable
<3> i had this once.
<6> intel network cards are rock solid
<3> and your theory is wrong ;=p
<6> it is true with sound...
<1> anyone know about my hdtv issue?
<6> stainer72, what kind of tv/vidcard
<6> like are you using dvi or component input
<0> ducch: I had this thing: when my onboard p4 mobo had 1 gbit lan I thought what the hell lets buy a gigabit swithc and a pci-card for my 2nd pc (pentium3). but the speed gain is 2-3 times only cause the pci is too slow
<3> right
<3> im off to school
<0> ducch: bye
<0> have a light day at school :(
<0> I mean I hope the day is easy :)
<0> school ****s :)))
<1> I just dropped my vid card on the ground from about 2 feet onto carpet
<1> it still seems to be fine
<1> scared the **** out of me
<7> for a pic with adc, whats the maximum voltage that can be used for ref.?
<7> reference
<8> typing this on my new pc
<8> I have an idle temp of 34 degrees
<8> on my cpu
<8> and 41 with my graphics card
<8> bad? good?
<9> 26c idle cpu
<9> but its freezing in here so that dropped it about 5 celcius
<10> good temps
<10> idle temp is meaningless until you load the cpu at 100%
<10> most of the time it peaks to 45 or 50c
<10> depends upon ambient
<10> run prime95 or
<10> game the machine
<10> see if its unstable
<9> wtf ati released x1900
<9> xtx
<11> what would cause a pair of matched DIMMs to no longer work in 1T and need 2T cmd after running fine for 5 months?
<9> when that happened to me, it was the cpu
<9> ruined 3 pairs'
<11> you mean they would never work in 1T again?
<9> they would never work correctly in any setting
<9> system wouldn't boot into windows
<11> well I mean after you changed CPU
<11> was the ram still destroyed?
<9> after i changed cpu it worked find, i still have to test the older memory though
<11> I suspect my newcastle 130nm 3500+, think its memory controller might be poop
<9> yea
<11> I have Corsair 2x CMX512-3200C2PT
<11> so thats PC3200, 2x512, 2.5-3-3-6 and I run them at 3-3-3-8 by SPD and they still crap up
<11> they work fine alone
<11> they work okay together I guess, but at 2T
<11> I could see the thing not being able to drive 4 dimms at 1T
Return to
#hardware
or
Go to some related
logs:
#heroin
biowin exploit
E O O C R L
#hardware
frshrpms
dell Video controller failed to initialize or respond
#solaris
hho blueprints
#delphi
gene simmons julie banderas
|
|