| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11
Comments:
<0> dual core proc
<0> should have no problems
<1> I'm running one with 2GB now
<2> has nothing to do with being dual core
<2> has to do with the memory controllers they put on the 90nm processors
<0> and the ram is good, cause i have serveral p4's with ASUS P4P800-VM boards and this ram works fine in them
<2> did you read asus's help?
<2> and is the ram listed on a compatibility page?
<3> ram compatibility page? I thought that was just marketing hype
<0> they don't seem to have a compatbility page for this board
<4> jennyfer: it apears that "startkeylogger" is some bug with the norton firewall. That's why that guy typed it earlier.
<2> Kempo, well to some extent...
<0> and in the manuel all they list is 512 and 256 meg ram
<2> Kempo, yeah...but the ram compatibilty lies within the processor, not the motherboard
<2> for athlon 64 anyway
<2> I just realized that...
<2> I mean...if a motherboard has problems with ram that another athlon 64 mobo doesn't...then its one screwed up motherboard
<0> we also have a athlon 64 3200 plus a single core and it has the same issue
<0> its with the motherboard
<0> just need to know why and what chips work
<0> i have a ticket with asus going on it
<2> did you try setting the ram speed to 333 for kicks...
<3> i bought my mobo/cpu/ram bundled
<3> just because i did not want to learn about this
<3> hehe
<5> Whenever I do a settings change on my router, the router freezes
<2> so...don't change the settings?
<2> lol
<5> and lately weve been having problems with our router
<2> does it have the latest firmware?
<5> yes
<5> di 784 it is
<5> wireless a/g
<5> its just inconsisten
<2> a/b/g
<2> :p
<5> ya
<5> it works sometimes for a while, then sometimes it will just freeze, or drop wireless connections
<5> any suggestions
<6> hi all
<6> still no success with my broken external fw harddrive
<6> i tried to chkdsk the drive but it tells me that the drive is no longer available
<6> i have error code 43 in yellow ! in the disks under system hardware
<6> is there a way to repair this?
<7> probably
<7> does windows recommend anything?
<7> id try going to #windows IMO
<7> tii
<7> also
<6> hmm well windows doesn't give me anything
<8> can I download windows vista beta someplace?
<7> lol if you can run it
<8> I need something special to run it?
<7> DX 10 etc
<7> am i right?
<6> well the harddrive has been stopped thats what windows tells me "code 43"
<6> Windows has stopped this device because it has reported problems. (Code 43)
<6> One of the drivers controlling the device notified the operating system that the device failed in some manner. For more information about how to diagnose the problem, see the hardware documentation.
<6> now i don't care what's on the drive
<9> how many times have you googled that today, MagicMoon
<6> till death
<3> good night, thanks for the ideas
<6> can i somehow force the drive to be repartition reformat and chkdsk outside of windows?
<10> get BartPE
<9> are you fully patched
<6> what do u mean?
<9> updated bios, updated motherboard drivers, updated windows patches
<9> at the very least all the windows patches
<6> yes sure i have that
<9> go check
<6> this drive worked perfect till now
<6> i'm on a notebook with this
<9> what did you do to it then
<6> and i just updated the motherboard
<10> have you been just unplugging it without "removing" it in windows first?
<6> no
<10> does the drive light up?
<10> spin up
<7> could it be a boot disk error anyone???
<6> yes
<6> yes i think its a boot disk error
<7> i had one on an old laptop
<7> when i replace the drive
<7> i might see if it can play CS :)
<10> its an external drive?
<6> yes
<6> its an external firewire
<10> has nothing to do with boot disk error
<9> there's a patch addressing your very issue on windows update..
<10> got any other computer to try it on
<6> yes i tried it on my macintosh today
<10> works?
<6> no
<6> i see it under the disk utility
<10> format it
<6> but when i try to partition it again or erase
<6> i get an in/out error
<10> does it click?
<6> i tested it also with techtools on osx
<6> no its not clicking
<10> it's broke prolly heh
<10> you can prolly replace it
<6> i hear the regular noises from the hdd
<10> open it
<10> it's prolly a normal ide drive
<10> unless its a little one
<6> no i think its a regular big one
<10> crack it open
<6> no i'll loose warrenty
<10> put it on ide on the computer
<10> well it broke
<10> take it back
<9> :p
<7> ya
<7> you can do it
<9> he's got his illegal **** on it
<6> i just want to try everything before taking it back
<7> loool
<7> get a virus that deletes the HD on it
<10> kiddie pr0n
<9> try to dban it
<9> :p
<7> ewwwww kiddiephile
<6> very funny
<10> microwave it
<9> would microwaving void the warranty?
<10> how will they know
<9> heh
<10> dont do it for 10 mins
<10> hah
<11> anyone know my computer can't output higher than 720x480 resolution? im using a DVI to HDMI cable. my pc has a dvi output port and my tv has a hdmi input port. it works. but i can't get HD quality. my tv is a Sony KDF-E55A20. my pc is a toshiba M1 laptop w/ docking station (that has the dvi output).
<11> basicly im trying to use my hdtv as a monitor
<11> when i select higher than 720x480 res, it starts panning around when i move the mouse closer to the edges..
<11> any ideas on what i can try?
<12> i had no luck with the router :(
<12> i even put in another network thingy from another pc
<12> the ethernet is just not responsing
<12> or i dunno if its set up right or what
<10> prolly not
<10> did you do an ipconfig on the computer?
<12> umm i dont know what that is
<12> or how to do it
<10> open a command prompt
<10> type ipcondig
<10> fig
<13> /run cmd
<12> k
<12> yeah ?
<12> done
<10> i meant whe plugged into router
<10> while
Return to
#hardware
or
Go to some related
logs:
young maddoxx
#directx
suna thermometer
#nintendo
Megaman 2 GBC alternate route to undernet 3
#computers
#politics
prebot tcl
#nintendo
#computers
|
|