| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11
Comments:
<0> yes.. it's just stopping to work
<0> Ramone, sorry, but nope...
<1> you ARE running DDO software?
<0> PC will not start (same effect if u didn't install memory)
<2> Electra: k thanks... just wanted to verify... I'm hoping that's my only problem ;)
<0> and there is no mainboards with 166MHz BUS.... it's 133... don't overclock :)
<2> ahh yeah it might've been 133 now that I think of it...heheh
<2> thanks
<2> what's the 133MHz represent? I know it's a rate, but rate of what?
<0> but 400MHz ddr memory will work on 266MHz mainboard
<0> rate? what do u mean?
<2> yeah... I'm trying 266 in 133 though
<1> clock cycles per second
<1> 133,000 clock cycles/sec
<2> ahh okay... just like cpus then
<1> yup
<2> cool...thanks guys... very helpful!
<1> electra - try SeaTools from seagate?
<1> it's a free download
<3> Does anyone here have a somewhat vast knowlege of JTAG?
<1> it's Diagnostic software, so hopefully it can tell you if you really do have an issue or not with the hardware
<1> then you can use "DiscWizard" to prep the drive
<1> it's on Seagate's support page
<3> !list
<0> i used DiscWizard already and filled drive with zeros
<0> but it works on other PC without problems
<1> travis, you are super hardcore
<0> and SeaTools said it's all ok with Hard Drive
<0> and hard drive works with NTFS on another PC....
<1> wait, but can you BOOT the other PC with it?
<0> and it works with FAT32 on that old PC, but not with NTFS
<4> my new dvdrw is awesome :) burn 8gb's in 12 mins
<1> rock
<0> mandango, yes... and it works without any problems
<1> so there is an issue specifically with NTFS on that one PC
<1> and it's not a RAM issue
<1> and not a HD issue
<0> and it's not CPU issue
<1> hey wait a sec, what happens if you take the drive which boots #2
<1> and try to boot #1?
<3> Can anyone help me with JTAG. I have a device that needs to have it's NAND flash memory dumped. I have a Xilinx Parallel Cable III, and the 6 required JTAG connections come out of that (TCK, TDO, TDI, TMS, VCC, GND) So far I have found the VCC and GND, but I need ***istance finding the others. I also need to know which software to use, I am currently attempting to use a program called JKEYS
<0> mandango, i didn't install another drive to old PC.... coz i'm sure it doesn't support more than 8,4GB's
<0> and i have no more free drive to install on it
<1> no no,
<1> you said that that drive boots PC #2
<1> what happens if you set it all up on PC #2
<1> and then move the drive back to #1
<1> ?
<1> actually, coming back to a more basic point,
<1> why do you need to run NTFS? :)
<0> well... problem with "delayed write failure"
<1> on fat32?
<0> how so why? if PC doesn't work... i need to repair it first before use it
<0> fat32 isn't good file system
<0> plus i can't install rights on access to files by users
<1> oh, I thought this was just a PC for yourself
<1> I would install a cheap IDE card and see if it made any difference
<1> oh!
<1> wait - when it worked on PC #2, were you using the same IDE cable?
<1> maybe it's a bad cable
<5> hello if i see event viewer errors with cdrom and disk are they both bad? maybe the controller is bad?
<0> mandango, yes... i tryed about 10 different IDE cables.. it's all ok
<1> OK, my money's on the IDE controller then...
<5> what chipset you got electra?
<0> yssip, hi, and what kind of errors?
<0> yssip, tomato mainboard... it's BX98-3D
<0> chipset is VIA
<0> mandango, IDE controllet, well prolly, i think so also...
<0> FAT32 is 32bit and NTFS is 64bit file system... is it addressing wrong?
<0> well... maybe do u know what cheap IDE controller to buy?
<0> coz all controllers arround is expensive
<6> oh look people are actually talking when I get back from work
<6> I never want to see a laptop again in my life.
<7> lol
<8> how so
<1> which country are you in?
<1> laptops are the evil
<0> me?
<1> HighPoint Rocket133SB
<0> russia
<1> in the US, this part is $23
<1> but I'm sure you can find a local equivalent
<1> you just want to try a self-booting IDE card
<0> and mainboard is Tomato BX98-3D, VIA Appolo Pro VT82C691, form Baby AT
<5> VIA OH GOD
<0> $23 USD :((
<5> your mobo prob worth 20$
<5> get a ***rock or foxcon for 30$
<5> just to test
<0> *cries*
<8> why does everybody hate via chipsets
<5> becuase its crap
<0> $30USD :(
<1> ouch
<5> for what a controller card?
<9> *and
<8> the black plague?
<9> oh yeah.
<5> i bought my promise sata / ide card for like 40
<5> that was years ago tho
<5> prob 20 now
<0> yssip, no idea for what controller card... but i'm not going to pay that much
<0> and 20 also...
<5> BUY A NEW MOBO
<5> for 35$
<0> yssip, u think i'm so crazy?
<5> or a new controller card for same price
<5> everyone is crazy
<9> Most of the motherboards I have use Intel chipsets. I've not seen anything else that can match them in terms of stability.
<0> yssip, maybe it's better to buy new PC?
<8> always is
<0> i got that PC for $25USD (from previous owner and it was working coz he had windows 95 and was playing Diablo 2 and Half Life on it)
<0> who knew it will not work with NTFS
<1> avg monthly income in Russia is ~$150
<1> $30 is a big chunk
<0> yep... $25USD for that PC + his old keyboard and his old mouse
<8> seriously?
<5> just get a slave to do your pc work then
<0> and $15USD for his old monitor Sony Multiscan E100
<9> People don't earn that much in Russia, but stuff doesn't cost that much either. Rent for an apartment or whatever is cheap as.
<1> yeah, but imported goods all cost the same
<1> I imagine
<8> so i'd be rich in russia
<0> and u r recommending to me to buy controller for $30USD?
<0> i could buy another PC for cheaper....
<1> well, I didn't know the avg. income until I looked... :)
<7> a pc for 30$?
<7> ****
<8> yeah i can a mouse for that
<8> not a good one
<7> my mouse was 75$
<9> Damn.
<0> EneergE, it's not so ****?....
<7> G5 laser
<0> Intel Celeron 333
<0> 32 MB ram...
<9> That's Aussie dollars though.
<0> 3 GB HDD...
<0> LG CD-Rom
<0> floppy :)
<5> 3 gig hd
<0> keyboard and mouse
<5> wowowo 1987
<0> i740 video card
<0> case+power supply.. it's nice PC....
<0> it could be nice office PC, by the way, if it will work sure :(
<9> My PC is ok. Pentium D 920, 2GB Ram, 120GB HDD, Liteon DVD Burner and Radeon X1800 XL graphics.
<0> Admiral, that pc i was talking about isn't that pc i would like to have myself :)
Return to
#hardware
or
Go to some related
logs:
#windowsxp
asshna
#solaris
#windowsxp
#debian
wmp without a form
knickerless girls shouldn't climb trees
#politics
Brokebak Democrats
#bsd
|
|