| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Comments:
<0> in the kernel
<1> it comes with an HP a820n
<1> its 200gig sata150 driver
<1> drive rather
<1> http://www.hp.com/hpinfo/newsroom/press_kits/2005/ces/ds_820n.pdf
<1> 200GB 7200RPM Serial ATA hard drive(
<2> that's bad irc etiquette
<2> _rynz-, if you don;t know what driver your sata card needs, then i can't help you.
<2> my advice would be to use something easier than gentoo.
<2> then come back once you understand linux a bit more.
<3> lspci ?
<3> I can try and help o.<
<0> there is a sata howto on the gentoo page
<1> ICH6
<1> lspci seemed to show more info
<1> 82801FB
<0> 7 hr sleep so tirrrrred
<1> smbus controller rev 3 (ICH6 family)
<3> k, now quickly, use google and find out what kernel drive that needs!
<3> you're not looking for smbus.
<3> 'm*** storage device'
<3> paste the output of lspci on www.rafb.net/paste please
<4> for some reason im incapable of sleeping more than 5 to 8 hours these days
<4> it's annoying
<1> its on a different box kraln,
<5> intel SATA uses the ahci driver
<3> _rynz-... and?
<5> my ICH6 and ICH7 boards do
<1> 00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03)
<3> okay, there you go
<3> and matja just told you it uses the ahci driver
<5> it will use ata_piix if its in legacy mode
<5> but thats unusual
<3> hmm, this is #gentoo right? been using bsd too long, I forget how to load kernel modules in linux
<3> :P
<1> insmod?
<3> sounds about right
<3> :x
<6> modprobe is generally safer
<2> nathanGL, what driver should i use for my sata card?
<7> mario andretti
<2> RageDemon, VROOM VROOM
<2> it's a joke
<7> o
<2> apparently matja answered him.
<2> this guy was all pm'ing me asking what driver he needs.
<2> like i ****ing know!
<8> I'm a scat man -.-
<7> baboopaliababoepwow
<0> you chinese now?
<8> no fool
<8> that's ninja face
<8> -.0
<9> You know how the wrt54g can run an open Linux. Does the wag354g?
<1> ahhhhhh, websense charges buttloads
<1> for SecurityPG
<0> check openwrt or dd-wrt firwmare pages
<2> Edam, openwrt.org has a list of supported devices.
<2> **** dd-wrt!
<10> how do i disable the damned dhcp daemon on device eth1 at startup?
<2> openwrt > dd-wrt
<2> poi__, rc-update del net.eth1 default
<10> ok
<2> is that what you're asking?
<9> "Work in Progress" Hrm
<10> is that command correct please?
<2> or do you need to configure it another way?
<10> i need to turn it off at bootup
<10> i LIKE manual config
<2> poi__, that is the command.
<10> i love you
<2> that makes one of us.
<10> are you a single woman? i will marry you.
<2> nope
<10> polygamy turns me on
<2> i'm a nasty unbathed 20 something man.
<2> and i just farted something FOUL
<10> this worked.
<10> let me test it.
<2> matja, do you know of a formula for calculating what apache's maxclients should be set to?
<10> how the **** do i get grsec patches on this system
<2> no idea, i'm not using grsec
<10> how do i mount usb sticks?
<2> the same way you mount any hdd.
<10> mount_msdosfs /dev/da0s1 /mnt/
<2> mount /dev/devicename /place/to/mount/it
<10> :((
<10> linux is LSD
<10> thanks for the rc-update command btw.
<10> my offer for marriage still stands.
<2> yeah, i'm not gay, so..
<10> you could dress up and we could make-believe
<2> no thanks
<10> is 2.6.17 the newest kern?
<2> i dont think .17 is in portage yet
<2> 2.6.16-r9 is what i got.
<10> oho
<2> .17 should be there soon.
<10> i got 2.6.15-gentoo-r5
<10> i wonder if i have a damned wm
<10> awesome, fluxbox
<2> did you install one?
<10> yes.
<10> but with linux you cant be sure.
<9> Hm. openwrt has theoretical support for wag354g, untested
<10> now i need some linux codes to compajl
<2> Edam, i personally would try it; but that's just me.
<8> wot
<9> Yeah. Guess I'll go about buying one
<2> i got openwrt running on a couple wrt54gs's.
<8> o no i don't know the formula sorry
<2> bitrot, wtf!@
<9> The wrt is a different chipset, which is the major issue
<2> not really
<2> there are a lot of different "chipsets" supported in openwrt./
<8> yep sorry
<8> I do however have fish that turn me into a pirate/ninja
<8> would you like one?
<2> Edam, you could brick your router by trying it though.
<2> so, do what you think is best.
<9> Mm. But Broadcom and TI are pretty orthogonal, and the TI set hasn't been tested fully yet :)
<2> bitrot, fish?
<9> I'll probably stick with stock if I do buy a wag354g
<2> yeah
<2> i probably would too
<8> katepls: yeah sorry i slipped into WoW talk :(
<2> but i don't know.
<2> i'm about 90% sure i was using the wrong Maxclients
<2> i had it set at 200!
<10> ifconfig wi0 inet 1.2.3.4 ssid $ssid wepmode mixed weptxkey 1 wepkey 0x$hexkey
<2> i found this one formula, that may, or may not be correct, but if i run my numbers through it, i get 24.5!
<10> how does this command translate to linuxoid command iwconfig?
<2> poi__, man iwconfig
<10> i read the ifconfig manpage 2 years ago.
<10> can i compile freebsd ifconfig on gentoo?"!#
<10> O NOE
<2> i don't think so.
<9> poi__: In order to set WEP keys and so on, it's normal to use iwconfig
<10> you people should realize that linux is ****ed up
<10> i love katepls :):):):):):)
<2> i have my wlan device being configured in /etc/conf.d/net
<10> rc.conf rc.conf rc.conf
<2> but i'm using wpa, not wep.
<9> ..Yuh
<2> pretty sure you could set wep in there too
<9> I seem to remember setting up wep in conf.d/net
<2> bitrot, see! people do love me!
<8> http://my.break.com/Media/View.aspx?ContentID=84659
<8> lol
Return to
#gentoo
or
Go to some related
logs:
#stocks
EtherLink XL WinXP 64
UNTAR.EXE
#flash
#computers
hiphob songs
#freebsd
#flash
#nhl
flash positioning not same as movie
|
|