| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Comments:
<0> Hi, I still have problem with my Xorg. Can I print it here and hope for someone to help me?
<1> use pasteme.com
<0> ok
<2> User: Haffy Pasted http://pasteme.com/p.php?id=243
<0> :D
<3> [agp] unable to acuire AGP, error "xf86_ENODEV"
<3> ati needs to learn how to spell
<0> huh?
<3> s/acuire/acquire
<0> aha, sorry.. I need to learn to.
<3> but that seems to be to do with you not having compiled in the correct AGP driver into your kernel
<3> (or as a module)
<0> I used this guide http://gentoo-wiki.com/HOWTO_ATI_Drivers
<3> <M> /dev/agpgart (AGP Support)
<3> <M> Your_AGP_Chipset_Here
<3> did you modprobe your AGP chipset driver?
<0> hold, dubblecheking
<0> <M> /dev/agpgart (AGP Support)
<0> <M> ATI chipset support
<0> modprobe fglrx
<3> i doubt you have an ATI agp port
<3> (do you?)
<3> lspci
<0> I have a secondary
<4> Haffy: what motherboard are you using?
<0> hold
<0> Abit KD7-raid
<4> yeah, that's a VIA chipset
<4> so you should compile VIA chipset support, not ATI chipset support.
<5> via? *stab* *stab*
<0> hmm
<0> *blush*
<0> can that be the answer?
<4> most likely
<0> I am recompiling
<0> thx
<0> failed to load ati-agp at boot
<2> User: Haffy Pasted http://pasteme.com/p.php?id=244
<0> thats how it looks now
<6> Haffy: you need the via one for North Bridge VT8377
<6> according to http://www.digital-daily.com/motherboard/abit-kd7r/ under NorthBridge
<0> ok
<6> are you following http://gentoo-wiki.com/HOWTO_ATI_Drivers
<0> yes
<6> \o/
<7> how can i print only the second word in a string without using awk? (can't use {})
<0> ? huh
<0> RageDemon: what northbridge?
<6> Haffy: I think the AGP stuff goes through the northbridge so you'll need to pick the VIA chipset driver for VT8377
<0> ok
<4> bjorn: sed
<7> hm
<6> for example my old asus a7m-266 had a via southbridge but I had to use an AMD chipset driver for the northbridge
<6> it had like an AMD 760 NorthGate or some ****
<7> could work.
<6> to get agp to work.
<4> RageDemon: he needs the via-agp module
<0> And how do I do that?
<6> Haffy: pick via instead of ati for the agp module :D
<0> aha, will try
<0> thx again
<0> but my card is a ati radeon 9200 pro
<4> Haffy: the troubleshooting section of the ATI gentoo wiki page outlines a potential change you may have to make that goes with this
<4> Haffy: but you don't have an ATI based motherboard
<6> Haffy: yeah it doesn't matter for this problem, your problem is about what "agp driver" to use with your motherboard
<6> basically
<4> your AGP *controller* is built into the motherboard
<6> and your motherboard is via
<6> ^^^ what he said
<0> I am confused, but I think I know what u mean. U mean that i have a hw AGP thing, so I dont need to **** around with the software stuff that i buildt in
<6> Haffy: basically there are two components, your northbridge's AGP controller and your AGP video card
<0> /etc/modules.autoload.d/kernel-2.x then i need to change in here
<6> Haffy: the module we're trying to get you to load is the AGP module which is for your motherboard, not your video card
<0> this will get hard to make the computer understand
<6> and your motherboard is via
<0> :)
<6> Haffy: I think you'd put the name of the via-agp module in there
<0> inside /etc/modules.autoload.d/kernel-2.x i have put ati-agp, but i changed it to via-agp now
<6> okay
<0> no error at boot this time
<4> Haffy: read the wiki page in more detail
<4> you missed something
<0> ok
<0> but thanks
<0> I whould never got this far without help
<6> np buddy
<0> but the XKEYBOARD problem is not the same error, can you help me with that. I cannot find any answers at google
<4> slight hint, kernel-2.x is not the right file
<0> kernel-2.6
<6> are there still problems with enlightenment (or other desktop environment) and ati radeon and transparency
<6> I remember running enlightenment dr17 a long time ago and some window transparency stuff was ****ed because I was using a radeon9800
<4> yeah, xfce's compositing manager borks when run with an ATI card
<6> ah yeah it was called "compositing"
<6> even new ATI cards?
<4> RageDemon: dunno, but it does with my M10 (mobility 9600 pro)
<6> oic
<0> How do I ensure that xorg-x11 is not compiled with the dlloader use flag?
<8> I seem to hae a problem with python, so portage soesn't work.. Any help?
<2> User: Haffy Pasted http://pasteme.com/p.php?id=245
<8> I seem to have a problem with python, so portage doesn't work.. Any help?
<6> what is hypermemory
<0> How do I unmask so I can make this command "emerge -av /usr/portage/x11-base/xorg-x11/xorg-x11-7.1.ebuild" ?
<0> did solve it
<9> crap, nvidia drivers are still ****ing up :\
<10> Obsidian: with xorg?
<0> every ****ing driver is ****ed up... (not everyone but mine!)
<4> my machine is working fine :-)
<4> only issue I'm having is what looks like a conflict between Xv and hibernation
<11> "We have a variety of Major Brand 20Gb HardDrives. For some reason If we dont have WD in stock we will ship either Maxtor or Seagate or IBM or Samsung/Fujitsu drive. "
<11> Why not just say "If we don't have WD, we'll ship another brand"
<4> Codegen: your average impulse buyer is more likely to read 9 words than 36 words.
<12> wtf, they're saying they'll ship what they feel like
<12> so they can charge you got a WD and ship a cheaper drive
<0> (EE) Failed to load module "glx" and (EE) Failed to load /usr/lib/xorg/modules/extensions/libglx.so , How do I install libglx then?
<13> video driver
<11> redhook: For $10, I don't care
<0> huh
<4> why do you need a 20 gig drive?
<11> cannedbar: for My c466
<11> It's only got a 4gigger in it
<4> Codegen: I guess I don't see the point when I can get an 80 gig locally for $20
<4> :-)
<11> Well, I live in a bum**** town
<11> In my P4, I'm not even using half of my 40GB
<11> d
<11> Ok, well, $70
<11> 70%*
<14> is there a portage channel? or can someone tell me why there is no ebuild for ethereal?
<15> didnt ethereal get a new name
<14> did it?
<14> i was not aware\
<15> no it didnt, im wrong
<15> selinux-ethereal is that it?
<15> it looks like it got taken out, not sure
<15> moved to wireshark
<14> whats wireshark?
<15> ethereal
<15> http://forums.gentoo.org/viewtopic-t-483533-highlight-ethereal.html
<14> ty
<5> [1]Optik: ethereal is now 'wireshark'
<5> the ebuild has been updated in portage
<14> thanks
<16> Does anyone know of a quick pal -> ntsc convertor?
<5> 25->30fps resample?
<9> vapor: shiznix has a great converter... it converts to DVD format but it can do ntsc -> pal and pal -> ntsc
<15> i lost the link to that one
<15> but it was nice
<17> anyone having trouble with mysql and php not working
<17> im getting to the point where i wanna kill my server
<17> im running mysql-4.1.20 and php-5.1.4-r4
<5> and whats not working?
Return to
#gentoo
or
Go to some related
logs:
#beginner
#hardware
OmegaEvil
Eiso monitors
irc.bitme.org port
banet sexy
#politics
#beginner
#linuxhelp
#computers
|
|