| |
| |
| |
|
Page: 1 2
Comments:
<0> richtroye
<1> dubkat
<0> heya
<1> heya
<0> how did you manage to break Xorg?
<1> i dunno. finally i rebooted and stuff works.
<1> but stuff worked before.
<0> oh. ok
<1> now i'm up with 2.16.1 and we shall seee.
<0> k
<2> Hmm.. is the Ati kernel module (fglrx) ready now then?
<2> it is like Ati do not want to provide linux users with service.. maybe Microsoft bought them
<2> never mind.. i found them here http://rpm.livna.org/fedora/testing/5/x86_64/
<2> kmod-fglrx was handed out some hours ago.. cool
<3> Hey Guys.. anyone have any weird issues with FC5 with their NIC not functioning?
<4> do i have to reboot for swat & samba to show up after installing the packages?
<5> sometimes when i create a new folder from a win xp client on a samba share it does not show the folder. anyone know why this is?
<6> hi guys
<6> was wondering if anyone could give me a hand with port forwarding using iptables on fc4
<3> wat do u wana do mappo
<6> im trying to forward a port, ive read how, but the thing is the machine im using for my uni project has one nic (eth0 = 192.168.1.104) the router provides inet to all the other machines 192.168.1.x , i want to be able to forward a port to a local machine say someone tries 192.168.1.104:54 i want it to go to 192.168.1.100:56
<3> use DNAT
<3> to change the destination address
<3> and you can also specify destination port
<3> SNAT you would use dpeneding if you want traffic to come back to you or go straight back to the client instead..
<3> so only when establishing a connection the packet comes through you
<3> after that it goes client -> client and doesnt hit your machine
<3> that would be if you didnt use SNAT
<3> if u used SNAT it would mean the traffic would always go client -> you -> client
<6> iptables -t nat -A PREROUTING -p tcp -i eth0 -d xxx.xxx.xxx.xxx --dport 8888 -j DNAT --to 192.168.1.100:80
<6> like that?
<6> no i think thats wrong
<6> hm
<6> joobie, im searching google for help, would that work if i add a rule for forwarding too?
<3> you're on the right track
<3> that DNAT rule is not formatted correctly
<3> but that is the rule u want
<6> i didnt think it mattered how the parameters are , i mean the order
<3> it does
<3> at certain parts
<6> gah
<3> actually
<3> that rule looks ok
<3> just strip the -t nat bit
<3> i dont think that's required.
<3> you will also have to enable ip_forward
<3> in your /proc/sys filesystem
<6> looking at that rule what would -d be, surely the DNAT --to 192.x (that ip is where i want to redir to)
<6> joobie, can i pm u, if not , nm:)
<3> sure
<3> guys
<7> hey there maybe someone could help me i got an ac97 codec and i had to reinstall fc4 yesterday but now i dont got sound from the system / xmms but with xine i do have sound and the card is recognized
<8> check your output plugin in xmms
<7> i did
<7> but the whole system is unable to play sound too
<7> like no sound in gaim, xchat, system "messages
<7> only xine got sound
<8> then check xines settings
<7> xine settings says audio & video drivers: auto
<7> and xmms does too
<8> what auto option in xmms ?
<7> output is ALSA 1.2.10 and configure says: device default
<7> OmegaEvil, www.wild-wolf.de/error.png
<8> well what does xine use ?
<8> OSS or Alsa
<8> ?
<7> doenst tell me
<7> only says auto
<7> but i tried oss too
<7> same thing
<8> right click on your audio mixer icon
<8> go into prefs
<8> play with that
<8> try the soundcard detection tool aswell
<7> he sees the soundcard but you dont hear the testsound
<7> this is quiete weird cuz i installed fc4 a few days ago and everything worked fine
<7> now i installed it again on the same hardware
<7> and now it doenst work
<9> what soundcard
<7> actually i got 2
<7> but the main one is not supported
<7> Its an 82801EB/ER AC97
<7> and the other one is a Creative X-Fi
<9> open alsamixer
<9> scroll the whole way over to the right
<9> press 'm' to unmute whatever channel is muted
<7> anyweb, there isnt anything muted
<9> are you 100% sure
<7> yes
<7> especially while xine plays
<7> and i checked every option
<7> there is nothing muted
<9> did you scroll the whole way over to the right in alsamixer to see the hidden options
<7> http://www.wild-wolf.de/sound.png
<7> yes
<7> i even enabled every device / setting i can in the preferences
<9> laptop/desktop ?
<7> desktop
<9> when did sound stop working
<7> when i had to reinstall fedora
<9> why did you reinstall
<7> cuz i lost with my windows system 2 hard disks so i installed fedora again to have a running system but i couldnt fix the drives over fedora so i got some recovery tools which only run with windows so i tried to reinstall windows but couldnt (just got a blackscreen when setup started) but i need a system somehow
<7> so i reinstalled fedora and then it happened
<7> cuz windows setup seemed to have played around with the mbrs allready
<2> Has this happened to you? You have got a nice multifunction printer like Brother MFC-620CN working in Windows.. In Fedora Core 5 however despite the fact that the printer is detected by kernel and KDE shows everything, even the cups interface .. and also reports that the printer is operating correct and you use an usb connection... No page is printed! The printer looks dead, but KDE and everything reports that the page was printed
<7> never heard of "ghostscript" ? lol *sorry*
<2> yes that is what .ps files use
<2> i bet brother is paid by microsoft for lousy driver support
<7> well
<2> next time ill perhaps get a hp printer, i head those are better supported by linux distros
<2> perhaps it is SE Linux not giving me printer output
<8> |Outrage|, i will help you..but not how
<7> checked google for that maybe? cuz i dont got a printer here to test and if i do so its an hp ;)
<8> tomorrow
<2> strange thing is that the printer pops up in say kedit print dialogue and the print page was successfully sent.. but the printer justs sits there doing nothing
<8> http://www.linuxprinting.org/
<8> get the right ppd
<8> im off to bed now
<8> if ya need help with it ..i can help ya tomorrow
<2> you must be american, cause it is 15:22 in norway
<2> big world..
<2> yes ill look for ppd then
<8> no im in the UK
<8> but ive been up all night
<8> anyway im off now
<10> hey, my processor in the BIOS says EM64T capable..
<10> should I run the x86 edition or the x86_64 bit?
<11> Hello, I am trying to install FCR5 on my laptop but once the X server attempts to start the LCD seems to lose signal. Any ideas? Thanks.
<9> Fedora core 5 extras >> http://www.linux-noob.com/forums/index.php?showtopic=2209
<12> hi all, i have a networking question. I have a 4prort dsl modem router. Which iam using as a bridge. Can i also use it as a router? by setting up nat? problem is i only what 1 eth device, which i would like to be both WAN(ppp) and LAN(eth0) or is that just not possible?
<13> can anyone help me with a tar.gz file?
<12> tar -xzf to extract? tht what you after
<13> well, i'm trying to update my firefox....i'm very new to linux
<13> i have an old version....i've downloaded the new file..but not sure how to install it
<13> it downloaded as a tar.gz
<12> what version of linux you running?
<13> FC4
<12> download the rpm then, easiest solution
<13> ? i'm sorry. how do i do that
<13> i think i've found it....thank you for your help
<12> try http://ftp.freshrpms.net/pub/freshrpms/fedora/linux/testing/4/firefox
<13> It says it has installed, but when i launch it (Applicatoins>Internet>firefox) it still says version 1.0.7
<12> did you close all your browser windows?
<13> yes, only this IRC is open
<13> now it says package already installed
<13> i launch mozilla or firefox from launch pad...but i get the 1.0.7
<12> what does "pgrep firefox" on the cmd line produce when all browser windows are closed?
<13> it didn't produce anything
<12> well thats good
Return to
#fedora
or
Go to some related
logs:
www.tampaforums.com
history of foxnewz
tcp over dns
laid bare bravo
#nhl
#solaris
#hardware
#solaris
#beginner
#computers
|
|
