| |
| |
| |
|
Page: 1 2 3 4 5 6 7
Comments:
<0> if it errors out
<0> you have 1 last setting you can try
<0> bumping mem to 2.7v
<1> ok prime is set to middle test afinnity cpu 0 cpu 1 priority 10
<1> ok
<1> one errored out
<0> not good
<0> back to bios
<0> set ram voltage at 2.7v
<0> my ram handles 220mhz @ 2.6v
<0> without any issues
<1> 2.7 !!@!@!@
<1> are you sure
<1> ?
<0> yah
<0> no prob
<0> .1v won't harm it
<1> are you sure it isnt 1.7
<1> ??
<0> no
<0> ram is 2.5v <400mhz
<0> 2.6v for 400mhz
<1> cause
<1> i had it set to 1.5
<0> and your ram might need 2.7v for higher
<0> CPu voltage to 1.5v
<1> yes
<0> ram operates at 2.6 by default
<0> and 2.7v might just do the trick
<1> k
<1> cpu voltage is 1.5
<0> yah
<0> nothing changes
<1> ram voltage is 2.7
<0> but bump ram to 2.7v
<0> if it errors at 2.7v,
<0> then we go back down to 2.5v
<0> 2.5ghz
<0> I mean
<2> OS: Windows 2003 Professional 5.2 Service Pack 1 (Build #3790) CPU: AMD Athlon 64 X2 Dual Core 3800+, 2.61 GHz Video: Plug and Play Monitor on nVidia GeForce 6200 TurboCache(TM) (1280x1024x32bpp 85Hz) Sound: NVIDIA(R) nForce(TM) Audio Memory: Used: 365/1024MB Uptime: 1m 42s HD: [C:] 20.50/37.27 GB Connection: NVIDIA nForce Networking Controller - Packet Scheduler Miniport @ 100.0 Mbps (Rec: 0.15M
<0> you set ram to 2.7v
<2> yes
<0> cpu is still @ 1.5v
<2> yes
<2> hehe windows is nice and snappy
<2> lol
<1> sweet
<1> hasnt errored out
<0> memory is still at 261 ?
<0> 216
<1> whoa
<0> ?
<1> haha
<1> not good
<1> machine shutdown
<0> error ?
<0> lol
<0> ok
<1> haha
<1> hehe
<0> 2.5 it is
<1> ok
<1> im gonna run an erron
<1> I will be back later
<1> gonna set it back to
<1> 2.5
<1> anything else I have to do roast
<0> 250Mhz FSB, 1.475v CPU, 2.6v RAM
<0> HT 4x
<1> sweet
<0> DDR333 setting
<0> oh
<0> and if you can find it
<0> set your ram to 1T
<0> instead of 2T
<0> it gives quite a nice RAM boost
<1> yes it at 1t now
<0> Command Rate
<0> I think it's called
<3> http://i.love.to/bang/Charlize.Theron/dr-charlize_theron104.jpg commercial time
<4> OS: Windows 2003 Professional 5.2 Service Pack 1 (Build #3790) CPU: AMD Athlon 64 X2 Dual Core 3800+, 2.50 GHz Video: Plug and Play Monitor on nVidia GeForce 6200 TurboCache(TM) (1280x1024x32bpp 85Hz) Sound: NVIDIA(R) nForce(TM) Audio Memory: Used: 384/1024MB Uptime: 59s HD: [C:] 20.50/37.27 GB Connection: NVIDIA nForce Networking Controller - Packet Scheduler Miniport @ 100.0 Mbps (Rec: 0.18M
<1> ok prime is set to middle test afinnity cpu 0 cpu 1 priority 10
<1> brb
<5> FreeBSD ****.localhost 6.0-RELEASE-p5 FreeBSD 6.0-RELEASE-p5 #0: Fri Mar 10 21:36:34 NST 2006 jason@****.localhost:/usr/obj/usr/src/sys/MYKERNEL i386
<6> Home at last.
<7> oh one
<7> eeeh esss deee
<7> who wants an *** w00pin in some UT
<7> be for its movie time :]
<7> eeeh esss deee
<8> w
<8> h
<8> o
<8> a
<9> just found out
<9> my gram had some cancer scan thing
<9> they said her cancer is in remission
<10> Jef, you need a sense of humor...I'm sick of you getting angry for no reason, and mostly, sick of you. adios.
<6> Damn, what an ending to BSG.
<6> Next season is not until October. :(
<0> anyone running an ATI card
<0> STAY AWAY FROM CATALYST 6.3 !!!
<0> :)
<6> That bad?
<0> screwed up 2D accel
<0> resizing. scrolling
<0> was laggy as ****
<0> and cpu usage would sky rocket
<0> and ontop of that
<0> reverting back to 6.2, by first uninstalling 6.3
<0> then installing 6.2 did not make the problem go away
<0> I had to re-ghost the HD from a ghost image I had dated last friday
<0> that's just wrong
<0> worst ATI experience so far
<0> it's been pretty much a smooth ride
<0> from 5.1 till 6.2
<0> but 6.3 is a disaster
<0> from now on
<0> I'm going to make an image of the HD
<0> before any Catalyst Upgrade
<0> lol
<3> Cpuroast
<3> whats a good driver for my x700 128m acer lappy?
<0> omega 6.2
<0> since it has a modded inf file
<3> k
<0> so that it installs on mobile laptops
<0> mobile ati chips
<0> I mean
<0> normall the plain ones from ati.com
<0> don't install
<3> i run win x64
<0> oh
<0> right
<0> no OMegas for you
<0> and the ones from ati.com don't install
<0> ?
<0> NOT the 6.3
<0> :)
<0> http://downloads.guru3d.com/download.php?det=1318
<0> these
<0> probably not
<0> so the ones from acer.com
<0> are probably the best ones
<0> for your laptop
<3> hmm
<0> what driver version
<0> do you currently have loaded ?
<3> i got pauses problems with CSS game
<3> from acer
<0> yah
Return to
#dsl
or
Go to some related
logs:
canal's waterlocks in birmingham
#stocks
#stocks
#nhl
I watch the proverbial sunrise
#vmware
castor bean poision
demandred on austnet
oblivion falkar recommendation
#politics
|
|
