| |
| |
| |
|
Page: 1 2 3 4 5 6 7
Comments:
<0> lol
<0> dual-core CPUs are moke closely linked
<0> then dual cpu systems
<0> it just needs 1 voltage input
<0> both cores get exactly the same voltage
<0> anyways
<0> moving on
<0> this isn't important
<0> :)
<1> =)
<1> im going to load prime
<0> according to anand 2.5 should need 1.475
<0> but load prime
<2> prime running affinity to cpu 1 and cpu 2
<0> if it errors out
<0> then bump cpu voltage
<2> k
<0> to 1.4
<0> on a64s, a little goes a long way
<2> still running
<2> give it a minute
<0> let it run 30mins
<0> here's why you don't have 2 voltage rails or voltage indications
<0> on dual-cpu systems
<0> as in a motherboard with 2 sockets
<0> that accept 2 cpus
<0> each socket gets a different power connection
<0> and voltage can differ
<0> slightly between the 2
<0> on dual-core systems, with only 1 socket
<0> you only have power connection
<0> and inside the chip both cores are internally linked
<0> so they both get the exact same voltage
<0> and they drain power from the same source
<2> HAHAH
<2> its still running
<2> hasnt errored
<2> this is a good thing
<0> yah, it's possible that HT at auto
<0> would set it to 5x
<0> which at 250
<0> would be too much
<0> cuz normally on 200mhz FSB
<0> 5x200=1000
<0> which is the max HT should ever be run at
<0> http://images.anandtech.com/reviews/cpu/amd/athlon64/manchesteroverclocking/ocsettings.png
<0> good reference
<0> http://www.anandtech.com/cpuchipsets/showdoc.aspx?i=2650&p=4
<2> yep still running
<2> full load
<2> im gonna leave like this
<0> AS# Latency.5 clocks
<0> RAS# to CAS# clocks
<0> RAS# Precharge clocks
<0> Cycle Time (TRAS) clocks
<0> is what cpu-z reports ?
<2> no
<2> not cycle time
<2> cycle time is at 8
<0> that's ok
<0> least important
<0> 7-8 is fine
<2> hasnt errored out yet
<2> hmm
<0> yah even anand's tests were unstable at 2.7ghz
<2> this must be the sweet spot
<2> mmmmm
<2> 2.5 lubs me
<0> so the max you could hope for with a bit
<0> of work
<0> is 2.6ghz
<0> I would try for it
<0> just for the heck of it
<2> lets do it
<2> on e sec
<2> ok
<2> so set it to
<2> 260mhz
<0> HT at 4x
<2> k
<0> only overclocks HT by 40mhz
<0> which isn't a big deal
<2> 1.475?
<0> 1.5v
<0> ram voltage to 2.6v
<2> so 1.5
<2> and ram voltage to 2.6v
<0> chipset voltage to 1.6v
<2> chipset voltage
<2> where is that setting
<0> well anand was using a DFI
<0> not an asus
<2> what I have here is a pci clock synchronization
<2> mode
<0> what's that
<2> and a PCI express
<0> what options
<0> for PCI clock synch
<2> 33.33mhz
<2> auto
<0> choose 33.33Mhz
<2> to cpu
<2> Auto , To Cpu , and 33.33mhz
<0> choose 33.33Mhz
<2> those are the option
<0> that locks it down
<2> ok
<2> ok these are the settings
<2> Cpu Freq is 260mhz
<2> pci Express clock is 100mhz
<2> ddr voltage is 2.6
<2> cpu multiplyer x10
<2> Cpu voltage 1.3125v
<2> pci synch is 33.33mhz
<0> http://www.viperlair.com/images/reviews/cpu_mobo/asus/amd/s939/a8nslipr/bios7.jpg
<0> isn't that your bios ?
<3> nupe
<3> im missing ht voltage and chispet voltage
<4> hmm hi
<3> heya esd
<3> just doing some clockin with the roasta
<4> nice
<0> you have an A8N-SLI ?
<2> roast thats a A8N SLI PRE
<2> premium
<0> oh
<2> im using a A8N SLI
<0> set CPU voltage to 1.5v
<3> k
<2> hmm
<2> kina hight for my hsf no?
<2> kina high rather
<0> nah
<0> a64s only start producing stupidly high amounts of heat
<0> beyond 1.65v
<1> OS: Windows 2003 Professional 5.2 Service Pack 1 (Build #3790) CPU: AMD Athlon 64 X2 Dual Core 3800+, 2.61 GHz Video: Plug and Play Monitor on nVidia GeForce 6200 TurboCache(TM) (1280x1024x32bpp 85Hz) Sound: NVIDIA(R) nForce(TM) Audio Memory: Used: 382/1024MB Uptime: 1m 3s HD: [C:] 20.50/37.27 GB Connection: NVIDIA nForce Networking Controller - Packet Scheduler Miniport @ 100.0 Mbps (Rec: 0.16MB
<0> 2.6ghz ?
<0> how's the voltage handling ?
<0> says 1.5v ?
<1> Cpuz saids
<1> 1.536v
<0> that's ok
<1> Speed Fan saids
<1> 1.54
<0> speedfan just rounds it
<1> mem 217mhz
<0> 4x HT multi ?
<1> yes
<0> ok, no chipset voltage adjust
<0> go ahead and prime it
<0> if it errors out
Return to
#dsl
or
Go to some related
logs:
#firebird
#beginner
WoW:Secret code for pet murloc
#beginner
#photoshop
#politics
#ubuntu
#goal
#heroin
#red
|
|
