| |
| |
| |
|
Page: 1 2 3
Comments:
<0> still crashed
<1> you didn't have to go all the way down to 2.2
<0> well for the mean time
<1> I would have tried 2.5ghz
<0> whats a good clock then 2.5
<0> ?
<0> yes I tried 2.5
<0> then ran prime again
<0> same thing
<1> while keeping the mem ratio correctly set ?
<0> we can try now if you want
<0> ?
<2> k im in the bios
<2> gimmee some 2.5 settings roaster
<1> you should know these by now
<1> :)
<2> well
<2> eh
<2> dram is set to 333
<2> Jumperfree configuration is set to
<2> cpu freq is 250mhz
<2> i mean 250
<2> Cpu multiplyer is 10x
<2> leaving cpu voltage to auto for now
<1> sure
<2> cas 2.5
<2> ras to cas 3
<2> ras precharge 3
<2> Cycle time 10
<2> HT
<2> 3X
<1> set cycle time to 7
<1> what options do you have for HT ?
<2> row or refresh cycle time
<1> cycle time = 10
<1> set that to 7
<2> HT is auto , 1x, 2x, 3, 4x , 5x Auto
<1> set it to Auto
<2> there is row cycle time and refresh cycle time
<2> ?
<1> hmm
<1> the one you said was at 10
<2> trc is at 10t
<2> and Trfc 11T
<1> set TRC to 11
<1> on should be TRAS
<1> on=one
<1> anyways
<1> not too important
<1> CnQ is disabled ?
<2> cnq ?
<1> Cool N Quiet
<2> yes
<1> ok
<2> one sec
<2> Memclock is 333
<2> Cas 2.5
<2> Min Ras #8T
<2> RAS to Cas delay 3T
<2> Row Precharge time 3T
<2> Row cycle time 10t
<2> Row refresh cyc time 11t
<2> read to write time 4t
<2> Write Recovery time 3T
<2> 1T/2T Memory Timing 2t
<2> S/W Dram over 4g remapping Enabled
<2> H/W DRAM Over 4g Enabled
<2> thats what I have set
<2> yes thats what I have set
Return to
#dsl
or
Go to some related
logs:
central-vision-file-system
#windows
#sql
#openbsd
#windowsxp
#gentoo
osb efnet
#beginner
#solaris
body alterations for religion
|
|