| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
Comments:
<0> 2 here, one downstairs
<0> we pay for 2 ip's
<1> yeah
<0> 2 here is all i'm worried about
<1> net the whole office through the one with connection shareing
<1> i mean, house
<1> heh
<1> i have to go here in a minute
<1> i just got a frantic call from the ppl i was working with last night
<0> this one will connect directly to the net, but my other cant, although it will connect to the net through this computer
<1> on their network
<0> any reasons why it could connect through ICS but not directly?
<2> what do you have as a gateway on either computer
<0> no gateway
<3> hi
<3> any one guide me about the computer
<2> nehvar, you need a gateway to leave the internal network
<0> well i checked and all the options are setup exactly like this comp
<0> but if i take this cable out and plug it in there, it wont connect
<0> but it can connect through ICS, through this comp
<0> so i dunno =x
<4> lol
<2> dunno man, if you're setting up the ICS computer and it's manual and you're not setting a gateway but getting to the internet you're breaking some old rules
<2> can't say why it works but can say it shouldn't
<0> well when you use the windows ICS wizard thing it auto sets a gateway
<2> the gateway ip should have been provided by your isp unless you're pulling dhcp you'll have to set it manually
<0> but for the main connection you dont need a gateay right?
<2> only way you're gonna get done what you're doing the way you're doing it is to plug your hub into the ICS computer
<2> and then plug all clients into the hub
<2> i don't know if that's possible with ICS, never used it
<2> but ics is basically just acting as a router so theoretically it should work
<0> well i have it working how i want already
<0> i just want to switch which one is hosting it, cause that one crashes sometimes
<5> </dance>
<2> so go through the ics wizard again and call your isp to resynch, or leave your modem off for awhile
<0> ok gonna try a few things, be back
<2> the problem is likely that your modem just needed to be reset, it remembers the mac address of the last thing plugged into it
<2> ...
<5> Yuo could easily chance the MAC address on the NIC on the other PC and replace it with the other.
<5> Vise versa.
<5> Just make sure each NIC has a unique MAC address or you will have problems.
<6> Soup
<2> troopa, you're more than welcome to talk him through changing his nic when he gets back here
<2> heh
<2> the trouble people go through when they could just go get a 50$ router
<5> I will up until it is time for me to leave.
<2> they're the reason my email is full of junk all the time
<5> I depart in 30 minutes to go spy on someone, ha ha.
<2> anyone here work for adaptec?
<7> if they do, they are
<6>
<7> haha that looks like a funny face!
<2> ...
<8> Hi
<7> hullo!Q'
<8> I have a cable modem that only supports 3 unique IP connectionsa at a time, what can i do that will allow me to connect 4 computers and all use the internet at the same time?
<7> someone ban perfekt
<7> get a router
<7> linksys
<8> so only a router will do it?
<7> wireless if you have a laptop
<7> yep
<8> hub and switch wont work?
<7> nope
<8> once i have the rpouter will it be simple?
<7> like putting icing on a cake
<8> just plug them in andf they all share 1 ip?
<8> they will all share the ip of the router itself eh?
<7> you'll be surfing beatporn.org in no time
<8> sweet
<7> yes
<7> lol
<7> i just did myself
<7> doesnt exist :(
<2> Hooools, hold on a sec, how many public ip addresses do you have?
<8> 3
<2> you don't need the router then
<8> www.beatporn.org = nothing
<8> for why?
<2> cause the router is usually used for NAT
<8> what i have is 2 switches and a lot of ambition
<2> using 1 public ip and several privates
<7> hes got 4 machines
<2> and 3 unique ip addresses
<7> the only other option would be using one of your computers as a router with ICS
<8> cooo cooo cachoooo
<7> it would have to be on all the time though
<8> ICS - it's dynamite
<7> 3 < 4
<8> ive got windows xp pro on this one
<8> i could use it right here
<7> the alligator goes for the bigger number
<8> and i have extra ethernet caaaarrrddd
<2> you're rockin then
<8> coo cooo cachoooo !
<7> Hooools you can do that, just remember that machine has to be on whenever you want the other three to work
<2> ...
<2> no
<8> all i need now is a 30 ft cable
<7> ..
<7> explain
<8> yes explain if u r so wise
<8> jk
<2> he only needs ics on one of the systems and the system without a public ip address would use that as it's router
<7> yes i suppose
<7> ok time for work google ics Hooools
<9> http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=7818&CatId=801
<8> i can set that up using nothing but a paperclip, a wooly mammoth tooth, and 4 paper plates
<8> and some duct tape
<9> is 45.6dba quiet for a fan???
<8> gamblore, you better believe it
<9> 52.8cfm is that good air flow?
<9> why is that fan so expensive compared to others
<8> gamblore, you better believe it
<8> yes its loud
<8> and yes thats good airflow
<9> so the higher the dba number the louder the fan?
<8> yes sir
<8> and 45 is loud
<8> as lound as 2 lovebirds chirping in the fresh autumn breeze
<8> loud*
<9> i dont know why it was so expensive then
<8> Welcome RobertW- please visit our website at http://www.computergeeks.com
<8> because it moves tons of air
<9> what is the best bearing type?
<8> good cooling
<8> slot 36DD is my favorite
<8> what, i think i confused that with anyother favorite of mine, nevermind
<8> wait*
<8> 30 db Whisper
<8> 40 db Buzz of mosquito
<8> 50 db Normal conversation
<2> liquid bearings
<2> anyone here in the IT field wanna help some kid get funding?
<2> all you gotta do is fill out a questionaire
<2> 12 questions, took me a few minutes to fill out
<2> doesn't ask anything personal like where you work or anything, just general questions
<6> My computer doesn't update most CD information when I put one in, other than when it first boots
<6> Like, the icons, the reported space used, etc.
<6> And if there's a non-CDR/W in when I boot the computer and then put one in, I can't burn stuff onto it
<2> what's the make of the drive?
<6> The who in the what now?
<2> the manufacturer of the drive
<2> who is it
<2> sony, liteon, yamaha
<2> tonka
<6> Sony
<2> did you go to the sony site and get updated drivers for it?
<6> No...
Return to
#computers
or
Go to some related
logs:
#goal
#tcl
#linux-noob
#online
#nhl
#gentoo
#3dsmax
#gentoo
#networking
#politics
|
|