| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Comments:
<0> same..
<1> one more thing to try - add the ram back that you took out, and pull the other one
<0> hmm how do i know if the CMOS is really cleared?
<1> the date and time will be set back to Jan
<1> but you prolly cant tell
<1> did you short the pins to clear it?
<0> yeah..
<0> it put the jumper on 2-3
<1> you can do it again - wont hurt
<0> waited for 15 secs
<0> then put the jumper on 1-2
<1> k
<0> doing it with the CMOS battery On and the power cord off
<0> then i plugged the power cord and boot the pc
<1> cant think of anything else that would casue it to stop
<1> is the cpu fan spinning?
<2> just too bad then
<2> thnx everyone :)
<3> yo fellas
<4> i have a user (computer) that is changing to a high resolution when just a certain user logs in. when anyone else logs in, it's fine. i've installed monitor and video drivers for it and still no luck...it changes back to the high resolution every time he logs in. any suggestions?
<3> any ways to hook up a pc using xp 64 and a 7800gtx to a high def tv? :>
<4> i have a user (computer) that is changing to a high resolution when just a certain user logs in. when anyone else logs in, it's fine. i've installed monitor and video drivers for it and still no luck...it changes back to the high resolution every time he logs in. any suggestions?
<5> oh
<1> cappscity, is it too high for the monitor?
<6> my hard drive appears extremely disturbed -- when i download a small 30 MB file in internet explorer, it takes 30 seconds for it to copy from the temp dl folder to the destination i chose
<6> it has been very sluggish - 3ghz 512 mb ram
<6> shouldn't be that bad
<1> 30 megs isnt trivial
<7> hi all
<7> can someone give me an opinion on a computer?
<7> compaq presario v2410ca
<1> computers are evil - that my opinion
<7> amd turion 64 mobile technology ml-30
<7> 512mb 333 MHZ DDR system memory, 80 GB hard drive
<1> laptop, huh?
<7> yes
<1> I like compaq laptops, actually
<7> are compaq presarios any good?
<1> that should be a fast one
<1> I have a customer that bought a few, and they seem to work fine
<7> do they stand up to alot of punishment?
<7> that processor is a good one?
<8> What proc?
<1> sure
<7> the guy at the store said that with mobile tech the processor only uses the power it needs
<8> Right
<7> also it was a 6 cell battery
<8> Which means it can hold more electricity
<7> how long should that last
<8> Depends
<8> How fast the hard drive is, how much RAM, what kind of optical drive, what processor, what speed the RAM is, etc.
<9> I'm installing a Linksys Wireless G PCI Adapter on Windows 95, but I am getting errors. WALN_Cfg message box pops up, and this is the message: Access violation at address 00000009. [then next line...] Read of address 05EBBFB9.
<9> Is there a compatibility issue? Because I have installed it on Windows 98, and 98 OSR2 before perfectly fine.
<8> I don't think that card supports 98
<8> err.
<8> 95*
<8> typo
<1> 95 is kinda old
<8> 95 is really old
<1> its a pretty horrible OS
<8> as in 11 years old, and it wasn't that great to begin with
<9> It's not my computer though, and they won't get off it.
<8> Then they don't get wireless, Skoorbius
<9> I don't understand how it won't work with Windows 95 though... That's just strange. All the hardware is on the PCI card itself, and there is a PCI slot in the motherboard. Seems like it's just a driver issue or something.
<1> 95 doesnt support usb either - go figure
<9> Okay, it actually does work for 95 according to the product requirements.
<1> appartently not
<9> Yup, not support for it on 95.
<1> time for a new OS
<10> 95 does support usb... 95b
<10> there were two releases of 95
<1> thnk there were more than that
<9> Wrong, there were more than 2 :)
<9> I believe there were 5 or 6.
<1> 4?
<10> you miss my point in the effort of sounding superior.
<10> there were two as far as usb
<1> lol
<10> one without, one with
<10> 95a, 95b.
<1> 95c
<9> USB support was on OSR2.1
<9> the 2.1 95b, not 2.0 95b...
<9> thanks for the help guys. seeya.
<4> i have a user (computer) that is changing to a high resolution when just a certain user logs in. when anyone else logs in, it's fine. i've installed monitor and video drivers for it and still no luck...it changes back to the high resolution every time he logs in. any suggestions?
<11> sup all
<1> is the resolution too high for the monitor?
<4> nope, the user just doesn't like it that high
<4> it's like 1280x1024 instead of 1024x768
<1> what cant you change it? is he not an admin or power user?
<1> is this a domain?
<4> yes, domain. he is a power user. he can change it, but it changes back every time he logs into the computer
<1> if he's a Domain User, then he has no rights
<1> it over-rides his local power user settings
<4> so i would have to promote him to something more just to let him change that?
<1> no. you can give him permissions
<1> log on to his pc as Admin
<1> then open computer manager
<4> and?
<1> you want to give him local admin or power user?
<4> i already gave him power user
<1> then open the power users group, and select the domain in the pull down list, and add Domain Users to the power users group
<4> already did that too
<1> then you rebooted?
<4> yeah, that's been done a long time ago
<4> so all domain users are power users in the org
<1> on each pc
<4> yeah....it was done on an image and then deployed via ghost, but same thing
<1> well, if this one person is having troubles, then his profile might be corrupted
<1> maybe even spyware or something
<4> k, figured i'd see if anyone had anymore ideas before i delete his profile
<1> make sure to backup his docs, favs, and desktop files
<4> yep yep
<1> good luck
<12> omg im truly a nerd, i just saw 1337 over and over in a debt card tv ad
<13> Anyone here with good knowledge of XP?
<12> i do
<13> At startup windows explorer doesn't load. I have to do i manualy in Taskmanager
<14> yeah
<14> go to start> run
<14> type regedit
<14> navigate to hkey_local_machine\software\microsoft\windows\currentversion\run
<14> right click on the right hand side and select new>string value
<14> enter in a name for the value
<14> then doubleclick it
<14> and for value data
<14> type explorer.exe
<14> then restart and see if it worked
<13> ok
<13> i'll try
<14> thats one way to do it
<14> there are many others
<14> but i dont feel like explaining services right now
<13> just explorer.exe on string value and explorer.exe on right side
<14> yeah
<14> that will work
<14> all the ohter values in there is crap that starts up when your computer boots
<14> well wehn windows loads rather
<15> hey
<13> it didn't worl
<13> work
<16> Dun dun.
<13> it startet after i did the manual starting of explorer in taskmanager
<10> its time for a repair install
<15> just last night i got my new hardware (mobo, cpu, gfx) and I installed them, and of course, xp doesn't want to boot now. i just picked up a floppy drive this morning so i could run a repair from the cd but i can't even get that to work. i get an error saying "file nvatabus.sys caused an unexpected error (4096) at line 2108 in d:\xpsp1\base\boot\setup\oemdisk.com"
<16> Hm.
<13> qayin:) stil here?
<16> Can I plug in RAM in my mobo right away without having bootup problems?
<15> ah maybe this floppy is bad
<16> Well, check out line 2108 in oemdisk.com.
<15> hehe this is during the windows install... i just looked it up online, says it's probably a bad disk, which it probably is
Return to
#computers
or
Go to some related
logs:
NSR BILATERAL TURBINATE REDUCTION
cam gunning
#beginner
#ubuntu
centos apachectl command
#beginner
#computers
#computers
pictures cindirela story
#tcl
|
|