| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Comments:
<0> bye
<1> is it just me, or is freenode down?
<2> It's down, sorta.
<1> sorta?
<3> how can I blok DDOS ?
<4> all of freenodes servers are rejecting connections, it's being done at the irc servers, not anywhere above them
<3> at list filtering or firewaling the packets , or maybe logging the DDOS-er
<1> mrtgcool: remove the network interface
<3> tons ? at mrtg ?
<4> you can't block DDoS because it's a bandwidth saturation attack.
<3> I know we cant
<4> heh then don't ask how to block them....
<3> but at least we can make it hit the firewal..not the server
<1> fire-eyes: putting air between the network interface and the network connection will block it ;)
<3> or maybe make our ping always time out when ping ing
<4> if you can track down the protocols, ports and ip's yeah. typically it's extremely difficult to do so with a DDoS because there are hundreds or even thousands or more sources
<3> fire-eyes : sorry bad english :)
<4> nah, it's ok
<3> so we cant log the ip of the DDOS er ?
<1> ok, so with Mandriva 2006 I set up the network sharing to NAT eth0 onto wlan0. All of a sudden today, if I connect both eth0 and wlan0, ping fails on all interfaces with: "connect: No buffer space available" -- anyone know how to fix it?
<1> mrtgcool: if you do that, the DDoS-ers will be DDoSing your hard disk controller or print spooler
<4> I just spoke with a freenode oper, they're under very heavy attack.
<4> so they can't do much at this point
<5> anyone do tcl scripting here?
<4> they're allowing connections for short times to allow some folks to connect but then it goes back to rejecting again
<1> yea, i'll just stay down
<1> so any clues about my network woes fire-eyes ?
<4> yes but it comes down to what i said, nothing more
<4> get your hosting provider to help you, it's their job not mine
<6> old news? http://tinyurl.com/otdao
<4> freenode is accepting connections for a short time, but it will go back to rejecting.
<2> Which is faster for hard drives, PIO or DMA?
<7> p3nguin, DMA, doesn't occupy your cpu with copying.
<2> So... which is faster for hard drives, PIO or DMA?
<2> I have a decently fast CPU.
<7> p3nguin, I'd be surprised if DMA isn't quicker, but you need to benchmark whatever load you have to be sure. Seems likely that if you have more than one applicatoin running you want to use your CPU for the others instead of waiting on a slow harddrive.
<7> p3nguin, might be faster to poll on a network card though if you have lots of small packets, for example.
<8> liek amfg! permission to question???
<9> permission denied
<8> ummm...i'll do it anyway, m8
<8> ipod's compatablity with linux is what?
<9> compatibility, you mean
<8> yes
<8> spelling doesn't exist here
<2> That's where you are wrong.
<10> Hi i have a question ... i think i will sound stupid, but anyway
<8> i meant in mesa, az
<8> not #linux
<2> haha
<10> i just installed 1gb of ram, i had 256, but when y do $ free -h
<8> anyway...has anyone used an ipod on linux?
<2> I have family in Mesa, so I'll agree with you on that one.
<8> everyone's mormon but me :(
<10> soprry free -m, it says that the total amount of ram is 884
<2> estebon: Is this Slackare?
<10> but the bios says 1280M, why is that?
<10> no, its and lfs
<10> a lfs, sorry
<11> estebon: there is a kernel option
<2> You'll have to rebuild your kernel.
<11> for supporting more ram
<2> You need to enable the highmem option for 4GB.
<2> Otherwise it supports only 896M.
<9> estebon: install windows xp
<10> err, but it is for 4 gb, i only have 1,256
<10> why do you say that nsx?
<8> this computer has only 512mb and it's catching up to me now :o
<11> estebon: ignore nsx, get a mac
<10> mmm i feel very confortable with linux on my pc, thanks
<2> estebon: grep -c CONFIG_HIGHMEM4G=y /usr/src/linux/.config
<9> that comfort is illusory
<10> it is off
<2> That's why you don;t have your full amount of RAM.
<9> in all honesty, you might be better off with a distro which manages your kernel for you
<2> Enable the 4G highmem and recompile the kernel.
<9> if you can't figure out what kernel options you need, and why
<10> ok, what is that memory split thing?
<11> nsx; lfs is great for learning that ****
<10> does anybody know?
<7> estebon, normally operating systems split the adress space somewhere, 3:1 or so, higher part for the kernel, lower for usermode.
<10> ermm, ok, im rebooting now
<10> aha
<10> but that split is not dynamic?
<7> estebon, hence you can only have processes that consume ~3G of memory on a stock installation.
<7> Uh, on a 32 bit system, that is.
<10> aha
<10> ok thanks john
<12> HIO
<12> HI
<12> HOw use the command write?
<12> HOw Can I use the command write?
<7> write user [terminal]
<12> but
<2> write(1) or write(2) ?
<12> mm?
<12> for example: write veritto HOla --> that is rigth?
<7> p3nguin, write(2) doesn't sound much like a command.
<7> VeRiTTo, if veritto is logged in on HOla it should work.
<12> veritto is on tty p8
<2> John_Dow_: Good point. I didn't have any reason to check the descriptions.
<12> John_Dow_, Do you speak spanish?
<12> I can't
<12> help me!
<12> p3nguin: I type: wirte veritto [p8]
<12> and that doesn't work!
<8> can you use write on another network?
<9> talk works across networks
<9> i don't think it's exactly secure, though
<2> write john tty3
<2> Try it like that.
<8> so if my computer's on a wireless network which connects to another network, talk works?
<12> that show -->write: veritto is not logged in on tty8
<9> talkd has to be running on the receipient host
<2> Try: write veritto pts/8
<2> Check `w' to see who is logged in on what terminal.
<12> but Where do I write the messagge?
<8> just start typing and it shows in his/her terminal
<12> I am send a messagge to myself and I don't see it
<12> i type -> write veritto pts/8
<12> and that show: write: veritto is not logged in on pts/8
<2> (17:24:53) <2> Check `w' to see who is logged in on what terminal.
<2> Did you do what I say?
<12> ups!
<12> I did it!
<12> p3nguin, check that:
<13> Hi all
<13> I need some help please
<2> I bet you want us to GUESS what you need.
<13> You guessed right
<2> I'm not going to guess.
<13> In fact I hoped for a PM,as not to spam general
<13> But,anyway..
<2> You won't get that here.
<13> I recently installed a Linux distribution and i am using both Windows and Linux
<13> The problem is i can t access my hard drives when in linux
<12> p3nguin I am on tty p8
<13> There is some problems with mountings
<12> but, I can't send a messagge to myself
<13> Anyone is willing to help me?
<12> and me?
<12> to me!
<7> VeRiTTo, just skip the tty argument to write.
<13> ?
<2> VeRiTTo: It works for me here. There's nothing more I can do for you. You were given instructions.
<7> Ladose, mount -t fs /dev/whatever /mountpoint
<12> p3nguin, i follow the instructions but that don't work!
<2> Then you are not logged in on a terminal.
<12> I am!
Return to
#linux
or
Go to some related
logs:
#chat-world
#chat-world
i've got no strings pinocchio mp3
#india
#netcafe
creating turtle graphics in c++
#allnitecafe
#chat-world
dekho meri muskan kitni khoobsurat hai song
#chat-world
|
|