| |
| |
| |
|
Page: 1 2 3 4 5 6 7
Comments:
<0> Linuxoid, What CDROM device you've got?
<1> Linuxoid: that is even worse ...
<2>
<3> i have 2 cdrom devices: lg cdrom crd-8522b and sony cd-rw crx230ed
<3> ShIzoID, 10- ?
<0> Linuxoid, and you want to install Linux?
<4> blue_teeth: call whoever sold you the boxes & ask them
<2> ...
<5> hi i have some big problems after a kernel upgrade
<3> *
<2> ???
<1> gah
<3> ?
<2> 1.7 p4vxad
<0> Isaac-Lew, It's HP. Will check with them.
<4> Linuxoid & ShIzoID - do you mind using the roman alphabet & the english language please?
<2> ok
<3> : ( 700, LG Sony) ( 64 3200+, ASUS A8N-SLI, ) ! cdrom'
<4> thank you
<1> Linuxoid: english! last warning was done!
<4> Linuxoid: did you see what I just asked?
<1> :)
<3> -
<1> i think there was a russian linux channel on dalnet somewhere
<3> please, tell me
<1> no idea. i saw it a couple of years ago.
<6> linux.ru I think
<1> maybe someone in one of the russian channels know?
<1> Simpleguy: yeah, seems like it. their blog is in russian anyway
<7> how does mono work?
<1> well, it looks like its in russian
<7> is there an interface that works like the .net software in windows?
<1> Sivik: i think its mostly commandline
<1> Sivik: but the mono site has a lot of info
<7> ok
<1> Sivik: http://www.mono-project.com/
<7> i have been there
<7> do you write the code and then it run mono to create the application
<1> Sivik: i think so.
<7> ok
<8> no
<1> they seem to have a developerstudio as well
<8> mono is like the framework
<7> evin: what does that mean?
<8> you write the code, then compile... just like when using .net
<7> ok
<8> I have yet to find anything comparable to Visual Studio for linux though
<7> ok
<7> wasn't sure how it worked
<8> monodevelop doesn't have a gui forms editor
<7> ok
<8> or, didn't last time I checked
<9> Kevin, Eclipse or Kdevelop is usually what people compare with.
<1> Sivik: http://www.mono-project.com/Monkeyguide
<9> Uh, but I bet those doesn't have a gui forms editor either.
<1> |{evin: seems like it is there now, but im not sure
<8> cool
<8> more fun to use glade and gtk#
<3> buy, everybody!
<8> but... not as easy as drag-n-drop in vs.net
<1> oh, nm, they use an application running under wine or so.
<1> mono confuses me
<7> what is glade and gtk#
<8> glade is an application
<8> not sure how to best describe gtk#
<8> you can use it to make a gui that can then be bound to perl, python, C#. C++, whatever
<8> the GUI is separate from the code
<7> so there isn't anythink like visual studio for linux
<7> just the complimers
<1> except for eclipse and the like
<1> Sivik: no. theyre are not a lot of visual forms designers... there are tons of ide applications
<10> hello everyone
<8> you don't get the code completion and stuff, either
<10> i was wondering if you guys support gnugk?
<6> heh, I do not even know what it is
<1> |{evin: eclipse can do part of that. and ..umm.. kdevelop has something like that as well, right?
<7> what is a ide applications
<8> never used kdevelop... Eclipse didn't last time I looked, but that was probably a year ago
<1> Sivik: an integrated development environment...
<1> like an all-in-one tool to develop stuff..
<1> take a look at the programs/environmnets mentioned earlier
<7> ok
<1> "Deja Vu - worm attacks Windows and Windows Mobile powered devices "
<11> i cant establish a dcc chat because of my router, what ports should i enable?
<1> mescaline: a linux router?
<12> hola alguien sabe sobre shells
<1> there used to be this module for irc ..
<1> NAVEGADOR: english
<1> an iptables module even
<13> mescaline: You must configure your IRC client to use a certain port or port range, then forward the port(s) to your computer.
<13> I use a small range of ports so I only need to forward a handful of ports to my box.
<12> alquien maneja shells
<1> NAVEGADOR: please do not message me, and please speak english
<12> bourn shell
<13> Bourne shell is a good shell.
<13> Bourne Again Shell is a gooder shell.
<1> ksh is better
<1> :D
<12> shells
<12> shells
<8> everywhere shells
<13> Shells by near and shells by far.
<8> do this, don't do that, can't you see the shells
<11> Enchanter_tim yeah, im trying to dcc chat with my eggdrop
<13> mescaline: Did you bother to read what I said?
<12> espaol
<1> heh, why would kchmviewer use arts ?
<13> No espaol aqui.
<13> Ingles, por favor.
<1> where is the simscript when you need it ..
<11> p3nguin: should i open ports for my computer or for the linux box computer?
<12> en donde espaol
<13> You have to have a two-way connection for DCC to connect.
<8> #linux.es ?
<11> p3nguin how do i do that?
<13> mescaline: What IRC client do you use?
<1> NAVEGADOR: en espaa ?
<11> p3nguin i use mirc now, the problem is not the mirc thing its with the eggdrop
<12> vinculo cual es
<14> halow can I ask bout mrtg
<13> mescaline: Configure the eggdrop to use a certain port range (such as 10000-10100) and then forward only those ports to the computer which has the eggdrop.
<13> ssas: Don't ask to ask, just ask.
<11> p3nguin how do i forward? i cant add a range in the router
<14> watch my mrtg
<14> http://202.53.255.28/mrtg/
<14> what's wrong with it ?
<13> mescaline: Sure you can. If you can forward one port you can forward a range.
<11> nope, the editbox only fits for 5 numbers
<1> ssas: it shows me a zip file ...
<13> ssas: It's not installed or configured properly.
<14> so what should I do ?
<13> mescaline: Then use one port. You only need one port for one DCC connection. Use port 10000.
<14> I still figure it out, wether the lib or mrtg foult
<11> k
<13> mescaline: You must also set the eggdrop to use that same port for DCC.
<4> I'm not helping with any eggdrops
<11> do i need to have port 10000 on mirc and on eggdrop?
<13> I'm not either. I'm attempting to help with a networking issue.
<13> mescaline: You have to have port forwards for BOTH systems. You must have a TWO-WAY connection for DCC to connect.
<11> yeah but i dont need to use the same ports?
<13> Correct.
<11> k
<11> whats a NAT firewall?
<11> i have a d-link is that a NAT?
<13> As long as you configure the client and the router to use the same ports, you can use different ports on each system.
<13> NAT = Network Address Translation
<13> Most likely it is NAT.
<11> k
<13> It will either be NAT or NAPT.
<11> well i found a setting i can set a portrange
Return to
#linux
or
Go to some related
logs:
angie5
alspls
#india
rajesh khanna remarried
#worldchat
#chat-world
#php
#india
#india
#kl
|
|