| |
| |
| |
|
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Comments:
<0> and I know this because I route between my 172.23/24 voice lan and my 172.18/22 business without it
<0> RuneB: so no ya dont
<1> MrAnderson: you do realize that default routes are set up for you?
<0> actually there is no default route for it as the interfaces for examle the 172.23 are not even on that box
<1> default as in automatically set up for you, not the default route.
<0> it doesnt automatically set up for you routes for interfaces it has no address for
<0> it has no knowldge of the 10.0 network or the 172.23 until I tell it
<0> ergo it has no default routes for it
<2> what do i do when i can't find /var/run/mysql/mysql.sock?
<1> is the mysql daemon runinng?
<1> er running?
<2> no
<1> is it supposed to be?
<2> yeah
<3> So where do I get an updated nvidia Xmodule from?
<1> start the mysql daemon.
<4> bridge
<5> hazze`x onjoin hye if anyone cares
<2> 060806 19:54:21 [Warning] Can't create test file /var/mysql/zomg.lower-test
<2> /usr/local/libexec/mysqld: Can't change dir to '/var/mysql/' (Errcode: 13)
<2> 060806 19:54:21 [ERROR] Aborting
<1> did you compile mysql yourself, fedt?
<2> nope, openbsd package
<1> looks like it's trying to use /var/mysql when you have it installed under /usr/local?
<4> chown -R mysql /var/mysql
<0> DaTa-MaN: what distro
<0> DaTa-MaN: you can use nvidia.com drivers or atrpms repo
<4> p3nguin, may be this one http://linux-net.osdl.org/index.php/Bridge
<2> eh, there's no use "mysql". how do i know what it runs under?
<1> fedt: what distro are you using?
<6> ada yang orang indo
<2> openbsd 3.9
<7> openbsd != linux.
<2> yeah...i know. but i'm asking about mysql anyay, not linux
<7> and especially because you're using the OBSD package, I suggest you try an openbsd-esque channel.
<6> please help for
<6> simmy u no linux mandrake 10
<6> for configuration
<7> nope. Never ran mandrake
<1> fedt: this is a linux channel, not a openbsd channel or a mysql channel.
<7> http://www.unix.com/showthread.php?t=18527
<7> Look at that... a quick google answers the question. And it _IS_ OpenBSD specific.
<8> anyone knows a good site or book to learn about wirting scrips ?
<8> shell scripts that is
<3> MrAnderson: I'm running FC3
<0> DaTa-MaN: atrpms repo then
<3> MrAnderson: How do I remove a kernel module?
<9> rmmod
<0> what DaTa-MaN said
<9> oh wait.. I'm not MrAnderson
<3> How do I know what params to give it?
<0> none if you're removing
<3> I need to remove my nvidia kernel mod
<9> rmmod themodulename
<0> lsmod to get your list
<0> then rmmod
<3> gat ya...
<3> *got
<0> mind you you should be at level 1 or 3 when you do this
<3> thanks
<0> you shouldnt be in x doing this
<3> X is not even functional right now
<10> can one byp*** reverse lookup for specific ip in sendmail ? i have problem because any email injected from my router will show ip from eth1 which is a lan ip ? appreciate it if any of you guys could point me to the right direction
<0> and also if you are using the installer from nvidia or from atrpms you shouldnt **** with it the installer will remove the previous
<10> can one byp*** reverse lookup for specific ip in sendmail ? i have problem because email injected from my router will show ip from eth1 which is a lan ip ? appreciate it if any of you guys could point me to the right direction
<3> Well, I need to remove the new version, and install an older version
<0> Routermen: turn off reverse lookup or SNAT that address
<3> One that Matches my X version
<10> MrAnderson: thanks
<10> MrAnderson: i'll go for SNAT .. huhu why i didnt think of that before :P
<10> thanks again
<2> if i'm using iptables on my router and i want http access to only be allowed to sites by using privoxy on the router...how do i?
<3> MrAnderson:What is this installer that you are talking about?
<0> the one from nvidia.com
<3> How does it work?
<0> DaTa-MaN: it works like the instructions say
<9> Does your disto not just have a package?
<11> nivek it auto install it?
<9> (I wasn't paying much attention)
<3> nivek: it had one when I installe dfrom the FC3 CD... bu tI upgraded the system last night... and now it's broken as hell!
<3> I just need to get X running... then I'm installing ubuntu
<9> you don't need X to install Ubuntu :)
<1> why do you need X running?
<3> I KNEW someone was gonn ask
<3> I need it fro school
<1> ubuntu has X doesn't it?
<3> I can't afford to loose this machien while I spend a week learning a new linux distro
<4> DaTa-MaN, use default nvidia driver from xfree (nv)
<9> that should work, too
<3> slicers: I would.. if i knew what the fulyl meant
<3> *fully
<9> in your x config... set the driver to "nv"
<3> nivek: where do I find that file?
<1> yeah, you don't need the nvidia.com driver for 2D stuff.
<3> @D is all I use
<3> 2D
<4> just replace nvidia with nv in your x config file
<3> Where is the Xconfig file?
<9> it's /etc/X11/xorg.conf on my system
<3> how do I tell Vi to save the damn changes to the file?
<1> escape :wq
<9> <escape>:wq
<3> thanks
<1> damnit nivek
<9> I told you before... quit copying me
<3> sweet Xis running
<9> wtf
<3> now I can ditch this faggot Mirc!
<12> Oh look... a REAL IRC client
<9> gah
<12> So I'm gonna start DL'in ubuntu. What version should I get?
<9> Dapper
<12> Some guy wants me to send a screen shot of my desktop along with my irc client running on it. Is there any danger in that? Pardon me for bering clueless.
<1> hide the pr0n first
<0> DaTa_MaN: blur your nick list too maybe
<1> check for p***words on the screen, ssh sessions, etc.
<9> DaTa_MaN, did you see that?
<12> The guys name is raster^
<8> guys, is there a way to undelete files ?
<12> Kev[Disconnected]:> it's ratster^
<12> nivek:> sorry... raster^
<4> e2undel
<9> that's what I thought
<8> e2undel ?
<12> nivek:> is that the same guy?
<9> I believe so
<12> I'm not doing it
<8> okie dokie
<12> I don't know enough abotu Linux security... for all i know I coudl be giving away vital info
<8> not working
<12> raster^:> Take this and be happy http://xchat.org/screenshots/
<2> how do you tell how much memory you have and how much is in use?
<4> free -m
<2> no free :(
<4> cat /proc/meminfo
<13> I'm trying to delete files/folders older than 3 days using: find /path/to/dir/ -maxdepth 1 -mtime +3 -print0 | xargs -0 rm \-rfv -- but it deletes the /path/to/dir directory... what am I doing wrong? I'm wanting to delete folders/files INSIDE /path/to/dir not the 'dir' directory ....
<4> should be -print
<13> slicers: even when feeding to xargs ?
<4> yes
<13> slicers: it works fine if the dir has things inside it to be deleted, otherwise it's deleting the dir it's searching in... that's what I'm trying to get it to quit doing
<13> if the dir is empty, I want it to leave it alone :)
<4> add -type f
<13> slicers: say I'm searching in /home/chr1z/ -- I want it to delete ALL files/folders inside /home/chr1z/ that are older than 3 days. It's doing that just fine... but if /home/chr1z is ever empty it's deleting the chr1z folder itself... that's what I am trying to get it to not do...
<4> find /home/chr1z -type f -mtime +3 -print | xargs /bin/rm -fv
<13> -type f will do files AND folders inside /home/chr1z ?
<4> no, just file
Return to
#linux
or
Go to some related
logs:
#kl
jab hum jawan hon gay
do you want to continue debugging release
nutrer
#india
india Hot_Desi
#allnitecafe
#worldchat
isderm
priya bangal
|
|